EMC testing labs in Virginia
Looking for EMC testing services in Virginia (VA)? This directory lists accredited EMC and EMI laboratories and consultancies with locations in Virginia—ideal for emissions and immunity testing, standards compliance, and pre-certification support. Explore geocoded sites on the map, then refine results by accreditation, test type, industry, and other filters. Open a lab profile for full capabilities, standards, and contact details.
Map shows one pin per geocoded address in Virginia. Right now: 4 locations across 4 labs.
Showing 4 of 123 labs
American Certification Body, Inc. (ACB) is an independent wireless and RF product certification authority headquartered at 313 Park Avenue, Suite 300 in Falls Church, Virginia, operating since 2000. ACB holds accreditation to ISO/IEC 17025 as an OET accredited test firm for reviewing and accepting test reports, and to ISO/IEC 17065 as a product certification body. Regulatory designations include FCC Telecommunications Certification Body (TCB) status covering all available FCC rule parts including licensed and unlicensed wireless devices, ISED Canada Certification Body, EU Notified Body (No. 1588) under the US-EU Mutual Recognition Agreement, and UK Conformity Assessment Body for UKCA marking. Certification and approval services span FCC Parts 15 and 18 (intentional, unintentional, and incidental radiators), ISED Canada, CE Mark under the Radio Equipment Directive (RED) and EMC Directive, UKCA Mark, Japan MIC type approval, China SRRC and CCC Mark, Hong Kong OFCA RF approvals, Dynamic Frequency Selection (DFS) certification, 5G device certification, SAR and MPE evaluations, HAC assessments, and cybersecurity evaluation for consumer IoT devices. International approval and certification services extend to over 200 global markets through ACB's network of regional offices, partners, and agents. Wireless technologies supported include Wi-Fi, Bluetooth, WiMAX, GSM, CDMA, OFDM, and a broad range of licensed and unlicensed radio technologies across consumer electronics, marine, aviation, radar, broadcast, and ISM equipment product categories. An online e-file system supports secure exhibit upload and application tracking for FCC, ISED, Japan MIC, and CE Mark submissions.
Testing Services
E-Labs, Inc. is an ISO/IEC 17025-accredited EMC, EMI, environmental, and dynamics testing laboratory located at 5150 Lad Land Drive in Fredericksburg, Virginia. Specializing in military and aerospace EMC qualification testing, E-Labs provides comprehensive MIL-STD-461 EMI testing across all revisions from A through G, serving defense electronics programs including weapons systems, aircraft, ground support equipment, and shipboard systems. The lab is a go-to resource for defense contractors and aerospace manufacturers in the Mid-Atlantic region seeking accredited MIL-STD EMI testing. E-Labs' EMC test capabilities cover the full MIL-STD-461 test method matrix for all revisions, including conducted emissions (CE01–CE07 for revisions A/B/C; CE101, CE102, CE106 for D/E/F/G), conducted susceptibility (CS01–CS13 for A/B/C; CS101, CS106, CS109, CS114, CS115, CS116 for D/E/F/G), radiated emissions (RE01/RE02/RE06 for A/B/C; RE101/RE102 for D/E/F/G), and radiated susceptibility (RS01–RS04 for A/B/C; RS101/RS103 for D/E/F/G), with RS103 radiated susceptibility testing from 2 MHz to 40 GHz. Shipboard interface testing to MIL-STD-1399 Section 300B covers all ten interface characteristic tests. Large anechoic EMC test chambers are equipped with high-current DC and AC sources and pyramid-shaped RF-absorbing material. Emissions testing is performed to 40 GHz and radiated susceptibility from 10 kHz to 40 GHz. EMI diagnostic services, early-stage design reviews, and detailed EMI analysis for complex system integration are also available. Environmental and dynamics testing capabilities include MIL-STD-810, RTCA/DO-160, MIL-STD-167-1 vibration, thermal vacuum, altitude, humidity, salt fog, shock, acoustic noise, helium leak, pressure, and munitions testing, making E-Labs a single-source qualification testing provider for defense and aerospace programs.
Accreditations
Testing Services
Rhein Tech Laboratories is an EMC/EMI testing, mitigation, and certification laboratory located in Herndon, Virginia, just outside Washington, D.C. In operation since 1988, the lab serves a broad client base — from first-time entrepreneurs to seasoned engineering teams at global companies — helping them navigate EMC design challenges and international regulatory requirements to achieve the shortest path to market. Rhein Tech's services span several core areas. Their EMI/EMC testing covers commercial, industrial/scientific/medical (ISM), and military/aerospace equipment. For military and aerospace clients, they perform testing to MIL-STD requirements. The lab also offers shielding effectiveness and RF transparency testing on various materials, types, and sizes — useful for manufacturers evaluating enclosure materials, gaskets, coatings, and other shielding solutions. A more specialized capability is Radar Cross-Section (RCS) measurements, a less common service among EMC labs. A key differentiator for Rhein Tech is their emphasis on PCB design review and EMI mitigation. Rather than simply reporting pass/fail results, their engineers work with clients to identify design issues and recommend cost-effective solutions that can be incorporated into production. This approach helps eliminate costly last-minute redesigns and launch delays — a service that has earned them strong client loyalty and top marks in customer surveys for technical competency, turnaround time, and communications. On the certification side, Rhein Tech handles FCC certification, self-declaration support, and international approvals in over 100 countries. They also operate Rhein Tech Systems, a division focused on bringing new technology concepts to life with innovative solutions.
Accreditations
Testing Services
Technology International is a US-based EU Notified Body and UKCA Approved Body with over 30 years of experience guiding North and South American manufacturers through CE and UKCA marking compliance. Accredited by NIST to the European Commission for the EMC Directive (2014/30/EU) and Radio Equipment Directive (2014/53/EU), and accredited by UKAS for the UK equivalents, the company operates at the highest level of accreditation available for both markets. Services cover the full range of CE and UKCA directives including the EMC Directive, Machinery Directive, Low Voltage Directive, ATEX Directive, and Radio Equipment Directive. Technology International also supports SEMI safety standards (S2, S8, S10, S14, S22) for semiconductor manufacturing equipment. Rather than requiring products to be shipped to a facility, their engineers travel on-site to conduct assessments and testing, covering industries including industrial machinery, defense and aerospace, agricultural equipment, food processing, pharmaceutical manufacturing, packaging, and warehouse automation.