EMC Testing Labs in Nevada – Accredited Facilities
Nevada’s EMC work follows data-center hardware, gaming devices, and industrial electronics in Las Vegas and Reno. An accredited EMC testing laboratory in-state can cover commercial FCC and IEC campaigns; California remains the overflow for wireless and automotive depth.
2
Listed labs
2
Labs with listed accreditations
5
Metro areas
Accredited EMC labs in Nevada
2 listed facilities, 2 with accreditations on file.
LabTest Certification Inc. is an independent ISO 17025 accredited testing laboratory for North America, a Notified Body (NB) for EMC/RED EU Directives, and an Approved Body (AB) for EMC/RED U.K. Regulations, able to assist with all product approval needs. They are a world-leading company of EMC testing providers offering service to clients around the globe. LabTest is accredited by the Standards Council of Canada (SCC), International Accreditation Service (IAS), and ANSI-ASQ National Accreditation Board (ANAB), and is also an OSHA-recognized NRTL, a recognized member of the IECEx Scheme, and is part of multiple international MRAs covering Australia, Japan, Korea, Mexico, Taiwan, and other APEC member countries. Facilities are located in Richmond and Delta, BC, Canada.
Accreditations
Testing Services
SSC Labs is an EMC testing and design services lab based at the Harry Reid Engineering Laboratory at the University of Nevada, Reno, operating in formal partnership with UNR since 2019. The lab is staffed by iNARTE-certified EMC engineers with experience reaching back to the 1970s, including active participation on the RTCA/DO-160 technical standards committee. SSC Labs serves product developers, startups, and engineers needing hands-on access to EMC test equipment combined with direct engineering guidance throughout the testing process. Test capabilities include radiated emissions measurement, ESD testing (IEC 61000-4-2), conducted emissions, and immunity testing, with RF enclosures available for focused emissions troubleshooting and full standard sweeps. The lab also supports real-time bench-level design modifications during test sessions, including filter tuning, ferrite choke evaluation, PCB-level capacitor and common-mode choke adjustments, and shielding effectiveness troubleshooting using conductive tape and enclosure seam evaluation. Services offered include pre-compliance testing, CE Mark self-certification support, FCC compliance guidance (ANSI C63 series), RTCA/DO-160 military and aerospace EMC testing, independent lab time rental, and EMC design consultation. Telcordia GR battery testing is also offered. The lab model emphasizes direct engineer-to-engineer collaboration, with customers actively participating in test sessions and data interpretation.
Accreditations
Testing Services
If you are launching a gaming floor device or a rack PSU, say that up front—the limit lines and installation class change the quote.
Major metro areas
Listed facilities in Nevada are concentrated around these cities and suburbs.
- Las Vegas
- Remo
- Henderson
- Reno
- Sparks
Common test types requested in Nevada
Drawn from listed lab capabilities and the work teams in this region typically book.
- Conducted Emissions
- Conducted Immunity
- EFT/Burst
- ESD
- Pre-Compliance Testing
- Radiated Emissions
- Radiated Immunity
- Commercial Aviation EMC
Gaming, racks, and industrial boxes
Gaming and retail devices need FCC Class A or B with a story about a noisy floor. Data-center PSUs and controllers fail conducted emissions and harmonics if the lab only budgets a half day. Reno-area industrial and battery-related electronics add surge and immunity. Heat and dry air do not excuse a bad bond—labs will still fail a floating chassis.
Nevada or Southern California?
Use Nevada when the method is commercial and the calendar is better than LA. Use California for radio certification, CISPR 25, or a 10 m site. Ask whether the Nevada listing operates a chamber or brokers one in another state.
Frequently asked questions
Quick answers about EMC testing in Nevada