EMC Testing Labs in Noida – Accredited Facilities

ConsultancyEVTL India (Emphatic Vans and Testing Labs Pvt. Ltd.)

Website →

EVTL India, formally Emphatic Vans and Testing Labs Pvt. Ltd., operates from Sector 63 in Noida with a registered office at Laxmi Nagar in Delhi, and its practical business is regulatory certification consultancy rather than chamber operation. Customer accounts consistently describe it as a BIS consultant: managing documentation, guiding manufacturers through Bureau of Indian Standards audits, coordinating the licence process and handling the interface with auditors from start to finish. On the EMI and EMC side it provides regulatory guidance, pre-compliance testing and end-to-end certification support against the standards its clients need - FCC Part 15, MIL-STD-461 and MIL-STD-464, the ISO, IEC and CISPR families, and IEC 60601-1-2 for medical devices - covering both emissions and immunity, conducted and radiated. The company is ISO certified, MSME registered and a FICCI member, and carries Great Place to Work, Clutch and UpCity recognitions, but publishes no NABL or ISO/IEC 17025 accreditation and does not describe owned chambers, so it is recorded here without an accreditation entry and is best understood as a compliance consultancy that arranges and manages testing rather than performing accredited measurement itself. Its customer base spans medical devices, consumer electronics, aerospace, military systems, telecommunications and healthcare. Specialisations are BIS certification and audit management, Indian regulatory market access, pre-compliance EMC coordination, and end-to-end certification programme management.

HLL Lifecare Limited - EMC/EMI Testing Laboratory

Website →

HLL Lifecare Limited is a Government of India enterprise with its registered office at Poojappura in Thiruvananthapuram, Kerala, and it operates a dedicated EMC/EMI testing laboratory in Sector 62, Noida aimed squarely at the Indian medical device sector. The laboratory is accredited to ISO/IEC 17025:2017 by NABL under accreditation number TC-11078 and holds CDSCO registration TL/MD/2023/000002 - the combination that allows its reports to support medical device registration under India's Medical Device Rules 2017, which is the specific reason manufacturers come to it. The facility is built around a 3 metre semi-anechoic chamber for radiated measurement together with instrumentation for what it describes as all eleven basic tests: radiated and conducted emission to CISPR 11, electrostatic discharge immunity to IEC 61000-4-2, radiated immunity to 61000-4-3, conducted immunity to 61000-4-6, surge to 61000-4-5, electrical fast transient and burst to 61000-4-4, voltage dips and interruptions to 61000-4-11, power frequency magnetic field immunity to 61000-4-8, harmonic emission to 61000-3-2 and flicker emission to 61000-3-3 - which is precisely the test set IEC 60601-1-2 calls up for medical electrical equipment. That focused completeness rather than breadth is the laboratory's character: it does one standard thoroughly rather than many partially. Specialisations are medical electrical equipment EMC to IEC 60601-1-2, CDSCO medical device registration support, and Indian Medical Device Rules compliance.

House of Testing

Website →

House of Testing is a NABL-accredited and BIS-recognised independent testing laboratory in Sector 5, Noida, serving the Delhi NCR manufacturing and importing base. Customer accounts describe a well organised laboratory with notably fast turnaround, singling out battery testing to Bureau of Indian Standards requirements as an area where it delivers faster than expected - a useful signal given how much Indian compliance work now centres on cells, battery packs and chargers. Its EMI and EMC service covers the emission and immunity suite that BIS certification and CE marking call for: conducted and radiated emission to the CISPR 11, 14, 15 and 32 families as adopted into the Indian IS standards, harmonic current and flicker emission, and the IEC 61000-4 immunity series including electrostatic discharge, electrical fast transient, surge, radiated and conducted RF immunity, power frequency magnetic field and voltage dips and interruptions. Testing sits alongside electrical safety and battery work rather than standing alone, which suits a manufacturer closing out several BIS product standards at once. Note that the laboratory's own website could not be retrieved during research - houseoftesting.com refused automated access - so the capability detail here is drawn from verified business listings and customer accounts rather than from its own published scope, and the accredited EMC scope should be confirmed before booking. Specialisations are BIS certification support, cell and battery testing, electrical safety, and fast-turnaround compliance testing for Delhi NCR manufacturers.

Marquistech

Website →

Marquistech is a globally operating ISO 17025:2017-accredited testing organization headquartered in Mumbai, India, with a US office in Austin, Texas and additional offices across Europe, Asia, and the Americas. Founded in 2005, the company serves over 27 OEMs/ODMs, chipset manufacturers, and telecom operators worldwide, with deep expertise in mobile device testing, 5G, automotive, and IoT. The EMI/EMC testing facility is a newly launched capability offering both pre-compliance and full compliance testing. EMC testing covers emissions to CISPR 11 (ISM equipment), CISPR 32 (multimedia equipment), and CISPR 15 (lighting equipment), along with the full IEC/EN 61000-4 immunity series including ESD (IEC 61000-4-2), radiated RF immunity (IEC 61000-4-3), EFT/burst (IEC 61000-4-4), surge (IEC 61000-4-5), conducted RF immunity (IEC 61000-4-6), voltage dips and interruptions (IEC 61000-4-11), and DC input immunity (IEC 61000-4-29).

Pride Testing Services Pvt Ltd (Pride Testing Lab)

Website →

Pride Testing Services operates its own EMC laboratory at the NX-One complex in Tech Zone IV, Greater Noida West, serving the Delhi NCR electronics manufacturing base. It is an ISO/IEC 17025 accredited facility issuing NABL-accredited reports, built around semi-anechoic chamber facilities for radiated emission measurement. The published test programme is the complete European and Indian compliance suite rather than a partial offering: on the emission side radiated and conducted emission, harmonic current and flicker measurement; on the immunity side electrostatic discharge, radiated and conducted RF immunity, electrical fast transient and burst, surge and voltage dips and interruptions, run against the IEC 61000-4 series, the CISPR families, EN standards, FCC requirements and MIL-STD-461 for defence equipment. Alongside accredited testing the laboratory offers pre-compliance measurement, product-specific test planning and technical documentation and reporting, which suits manufacturers iterating a design rather than only closing one out. Its customer base spans consumer electronics, IT and multimedia equipment, telecom and wireless products, industrial equipment, medical devices, automotive and transportation electronics and smart and IoT devices. Confirm the current accredited scope before booking, as the laboratory presents its accreditation in general terms rather than publishing a scope document. Specialisations are multi-sector CE and BIS compliance testing, IoT and smart device EMC, pre-compliance measurement with test planning, and Delhi NCR regional service.

URS Products and Testing (URS Labs)

Website →

URS Products and Testing, trading as URS Labs, is a NABL-accredited multi-site Indian laboratory running two units in Sector 5, Noida and two more near Pune - at Mahalunge Khed and in MIDC Phase II at Varale - which puts it within reach of both the Delhi NCR and western automotive supply bases. Its EMC programme is notably complete across both the commercial and automotive standard families: conducted and radiated emission, conducted susceptibility, electrostatic discharge, electrical fast transient, current harmonics, transient immunity, voltage variations and surge testing, run against the IEC 61000 series, CISPR 11, 14-1, 14-2, 25, 32 and 35, the European railway and road traffic system standards, and the ISO 11452, ISO 10605 and ISO 7637-2 automotive families. The Noida site combines EMI/EMC testing on the ground floor with shock and vibration facilities and further testing across several floors, so a component can be taken through electromagnetic and mechanical qualification in one visit. The customer base is unusually wide - automotive, telecommunications, IT and audio-visual, multimedia, lighting, household appliances, machinery, railway equipment, battery management systems, medical devices, electric vehicle chargers and road traffic systems - with CE certification support for European market access alongside Indian BIS work. Customer feedback on service quality is mixed, with several reports of poor communication and handling after testing alongside positive accounts of the facility itself, so it is worth establishing expectations in writing. Specialisations are automotive component EMC, battery management systems and EV chargers, railway and road traffic equipment, and combined EMC with shock and vibration testing.