S.T.A. srl - StaLab
More labs in this area: EMC testing in Italy
San Martino Buon Albergo, Veneto, Italy
+39 045 751 4610Via della Concordia 4, San Martino Buon Albergo, Veneto, 37036, Italy
About
StaLab, the laboratory arm of S.T.A. srl, works from Via della Concordia at San Martino Buon Albergo just east of Verona, and holds an accreditation that is rare and genuinely distinctive: ACCREDIA accreditation number 02088 to ISO/IEC 17025:2018 in Category III for on-site EMC and low voltage directive testing. Category III is the flexible-scope classification that permits accredited measurement away from a fixed laboratory, which means StaLab's mobile laboratory can produce accredited test results at a customer's own premises rather than indicative pre-compliance figures - the practical consequence being that a production line, a large machine or an installed plant does not have to be dismantled, shipped and reassembled to obtain a defensible report. That is the core of the business: testing machinery, industrial plants and production lines in situ under the EMC Directive 2014/30/EU, with emission and immunity measurement, interference troubleshooting and root-cause analysis of EMI sources, and in-situ testing of complex systems and critical infrastructure. The regulatory practice around it spans CE marking, the Machinery Directive, the Low Voltage Directive, the new General Product Safety Regulation (EU) 2023/988, and physical agents assessment for workplace electromagnetic exposure, with technical file and documentation preparation; the firm also offers Life Cycle Assessment and product and organisation Carbon Footprint work. Sectors served are industrial machinery and automation, residential electrical and electronic devices, research and development prototypes, railway components and systems, and large-scale plant. Specialisations are accredited on-site and in-situ EMC testing, machinery and production line compliance, and EMI troubleshooting.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| EMC Directive 2014/30/EU |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 11, EN 55011, CISPR 32, EN 55032, EN 61000-6-3, EN 61000-6-4, EN 50121-3-2, CISPR 16-2-3 |
| Conducted Emissions | CISPR 11, EN 55011, CISPR 32, EN 55032, EN 61000-6-3, EN 61000-6-4, CISPR 16-2-1 |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, EN 61000-6-1, EN 61000-6-2, EN 50121-3-2 |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, EN 61000-6-1, EN 61000-6-2 |
| ESD | IEC 61000-4-2, EN 61000-4-2 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5 |
| Harmonics & Flicker | IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3, IEC 61000-3-11, IEC 61000-3-12 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11, IEC 61000-4-34 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8 |
| Pre-Compliance Testing | CISPR 11, IEC 61000-4-3, EN 61000-6-2, EN 61000-6-4 |
| Railway EMC | EN 50121-3-2, EN 50121-4, EN 50121-2 |
| Product Safety | EN 60204-1, EN ISO 12100, EN 62368-1, EN 61010-1, EN 60335-1, Directive 2006/42/EC, Regulation (EU) 2023/988 |
Certifications / Marks
| Certification |
|---|
| CE |
| ACCREDIA accredited on-site test reports |
| LCA |
| Carbon Footprint of Product |
Industries Served
| Industry |
|---|
| Industrial Equipment |
| Energy & Power |
| Railway |
| Consumer Electronics |
| Household Appliances |
Major Equipment
| Equipment |
|---|
| Mobile laboratory for ACCREDIA Category III accredited on-site EMC and LVD testing |
| Portable EMI receiver and spectrum analyser |
| Portable LISN and absorbing clamp |
| CDN |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Harmonics and flicker analyser |
| Portable RF immunity amplifier and antennas |
| Power frequency magnetic field coil |
| EMI troubleshooting and near-field probe set |
| Workplace electromagnetic exposure (physical agents) survey probes |
| Low voltage directive safety test equipment |
