EMC testing labs in Arizona
Looking for EMC testing services in Arizona (AZ)? This directory lists accredited EMC and EMI laboratories and consultancies with locations in Arizona—ideal for emissions and immunity testing, standards compliance, and pre-certification support. Explore geocoded sites on the map, then refine results by accreditation, test type, industry, and other filters. Open a lab profile for full capabilities, standards, and contact details.
Map shows one pin per geocoded address in Arizona. Right now: 4 locations across 4 labs.
Showing 4 of 109 labs
SGS
Applied Technical Services (ATS) is a multi-discipline testing, inspection, calibration, and engineering services organization with over 50 years of history and facilities across the United States. The dedicated EMI/EMC testing laboratory operates from the Phoenix, Arizona facility and is accredited to ISO/IEC 17025:2017 by A2LA (EMI/EMC Certificate No. 3661.03) and registered to ISO 9001:2015. EMC testing capabilities cover MIL-STD-461 (conducted emissions CE101, CE102, CE106; conducted susceptibility CS101, CS103, CS104, CS105, CS109, CS114, CS115, CS116, CS117, CS118; radiated emissions RE101, RE102; and radiated susceptibility RS101, RS103), MIL-STD-704 aircraft power quality testing (115VAC 400 Hz three-phase and single-phase, variable frequency, 28VDC configurations), and RTCA/DO-160 avionics testing (Sections 15–22 and 25, covering magnetic effect, power input, voltage spike, audio frequency conducted susceptibility, induced signal susceptibility, conducted and radiated RF susceptibility, conducted and radiated RF emissions, lightning induced transient susceptibility, and ESD). Additional capabilities include reverberation chamber testing, IEC 60601-1-2 medical device EMC, IEC 61326, EN 55032, FCC Part 15, SEMI F47 voltage sag, ANSI C63.27 wireless coexistence, indirect lightning testing, and pre-compliance testing. Industries served include aerospace, defense, automotive, medical, consumer products, and communications.
Accreditations
Testing Services
Compliance Testing, LLC is an ANAB-accredited (ANSI National Accreditation Board) EMC testing laboratory located in Mesa, Arizona, with over 60 years of testing experience dating to its founding in 1963. The lab holds FCC Telecommunications Certification Body (TCB) status and works with manufacturers across the United States, Canada, European Union, Australia, New Zealand, Korea, Japan, and other international markets. The lab carries an A+ Better Business Bureau rating and promotes a "Tested in the USA" mark for clients who wish to emphasize domestic testing on their products. EMC testing capabilities include radiated emissions, conducted emissions, radiated immunity, conducted immunity, ESD, surge, transients, harmonics and flicker, and voltage dips. Standards and certifications covered include FCC Part 15 and Part 18, ISED Canada, CE Mark (EMC Directive and Radio Equipment Directive), and a range of international standards for Australia, New Zealand, Korea, Japan, and other markets. Pre-compliance testing is offered to help identify design deficiencies and avoid costly delays ahead of formal certification testing. All testing projects are managed by experienced EMC engineers and compliance specialists who guide clients through the full process from initial requirements identification through final certification. The lab has also held recognition for CE marking under the EU EMC Directive, Low Voltage Directive, R&TTE/RED Directive, and Medical Devices Directive EMC requirements.
Accreditations
Testing Services
H.B. Compliance Solutions (HBCS) is an ISO/IEC 17025-accredited independent EMC, wireless, product safety, and environmental testing laboratory located in Tempe, Arizona, serving clients throughout the Phoenix metropolitan area and across the United States. The lab is staffed by iNARTE-certified EMC engineers with over two decades of compliance testing experience. EMC testing capabilities cover radiated and conducted emissions, radiated immunity, ESD, EFT/burst, surge, and conducted immunity for electronics, lighting products, medical devices, and telecommunications equipment. Commercial and automotive EMC is also supported, including CISPR 25, ISO 11452 (automotive component immunity), ISO 14982 (agricultural machinery EMC), and ENS0310. Standards addressed include FCC Part 15 and Part 18, ISED Canada, CE Mark (EMC Directive), and IEC 60601-1-2 for medical devices. Wireless testing covers a broad range of technologies including Wi-Fi (802.11b/g/n), WiMAX (802.16), Zigbee (802.15.4), Z-Wave, Bluetooth/BLE, RFID, land mobile radio, marine radios, aviation radios, satellite radios, short-range transmitters, and medical wireless devices. ISED Canada wireless certification is supported across an extensive list of RSS rule parts. Product safety testing covers CE Low Voltage Directive, Radio Equipment Directive, and Machinery Directive requirements. Environmental testing is also offered. Global market approval support covers USA (FCC), Canada (ISED), and Europe (CE Mark).
Accreditations
Testing Services
Robinson's Engineering Consulting (REC) is a veteran EMC engineering consultancy based at 11518 E Apache Trail, Suite 112 in Apache Junction, Arizona, operating under the tagline "Keeping the world grounded since 1976." The company provides electromagnetic management services spanning EMI, EMC, EMP, RFI, lightning mitigation, and transient energy mitigation across the full product lifecycle from concept through compliance. Services include concept-to-compliance product development, EMC design consulting, electromagnetic environmental testing, problem remediation and root cause resolution, regulatory compliance navigation, and custom component design. The custom component design work has contributed to hundreds of patents for clients across the industries served. REC positions itself as a long-term engineering partner rather than a single-engagement service, emphasizing continuous improvement relationships built on decades of hands-on experience. Industries served include aviation and aerospace, military, telecommunications, medical, commercial electronics, and automotive. The breadth of electromagnetic disciplines covered — extending from commercial EMC compliance through EMP hardening and lightning/transient energy mitigation — makes REC particularly relevant for defense, aerospace, and critical infrastructure applications where electromagnetic environment management goes beyond standard regulatory compliance.