EMC testing labs in Florida
Looking for EMC testing services in Florida (FL)? This directory lists accredited EMC and EMI laboratories and consultancies with locations in Florida—ideal for emissions and immunity testing, standards compliance, and pre-certification support. Explore geocoded sites on the map, then refine results by accreditation, test type, industry, and other filters. Open a lab profile for full capabilities, standards, and contact details.
Map shows one pin per geocoded address in Florida. Right now: 4 locations across 4 labs.
Showing 4 of 123 labs
Element Materials Technology
Element's Melbourne, Florida laboratory is a designated RTCA DO-160 and MIL-STD-810/461 Testing Center of Technical Excellence, specializing in EMI/EMC testing, environmental simulation, and dynamics for the aerospace, defense, and industrial sectors. Located on Florida's Space Coast, the 20,000-square-foot facility was opened in 2018 as a $2 million investment consolidating two smaller Element labs in Melbourne and transferring environmental equipment from the company's Jupiter, Florida location. The lab traces its roots to TÜV SÜD Melbourne, acquired by Element in 2017. The facility houses three EMI chambers and over 50 pieces of test equipment. EMI/EMC testing capabilities include radiated susceptibility up to approximately 200 V/m across 10 kHz to 40 GHz, conducted emissions and susceptibility, radiated emissions, indirect lightning testing (single stroke, multiple stroke, multiple burst to Level 3 per RTCA DO-160 Section 22), electrical power characteristics testing to MIL-STD-704 and DO-160 Section 16, and ESD testing. The lab also offers reverberation chamber testing and direct illumination HIRF (High Intensity Radiated Fields) — advanced capabilities demanded by modern aerospace programs for evaluating equipment survivability in severe electromagnetic environments. Environmental simulation and dynamics capabilities are equally extensive, covering HALT, vibration testing (including wind-milling vibration and 3 kHz high-g vibration), mechanical shock, thermal cycling, humidity, solar radiation, altitude simulation, corrosion and salt fog, waterproofness, icing, sand and dust exposure, and explosion proofness testing. The lab is accredited by A2LA to ISO/IEC 17025 and primarily serves the military, aerospace, aviation, and space industries, with clients including major defense primes and OEMs.
Accreditations
Testing Services
Element Materials Technology
Element U.S. Space & Defense is an ISO/IEC 17025-accredited EMC and EMI testing and engineering organization with a network of laboratories described as the largest EMI testing lab network in North America. The company has operated for nearly 50 years and holds Verizon Independent Test Laboratory recognition under the NEBS program. It is a division of Element Materials Technology and serves the defense, space, aerospace, and telecommunications industries. Customers include Boeing, Lockheed Martin, Raytheon, Northrop Grumman, Collins Aerospace, Pratt & Whitney, L3 Communications, General Electric, Eaton Aerospace, Aerojet Rocketdyne, the US Department of Defense, ViaSat, and United Technologies. EMC/EMI testing capabilities include harmonics and flicker, EFT, voltage dips and interrupts, electrical surge, radiated susceptibility up to 200 V/m (10 kHz to 40 GHz), magnetic susceptibility (DC to 100 kHz), HIRF testing (400 MHz to 18 GHz), mode-tuned and mode-stirred chamber testing, and indirect lightning testing (to 10 kV/10 kA, multiple stroke, multiple burst, and single stroke per SAE ARP 5416, DO-160, Airbus, and Boeing specifications). ESD testing covers a wide range of network models up to ±30 kV contact and air discharges, 300 kV vertical lift simulation, and P-static discharges. Chamber infrastructure includes 3-meter and 10-meter listed semi-anechoic chambers as well as 40' × 40' × 20' semi-anechoic chambers for military and aerospace applications, TEM cells, and strip line cells. NEBS/telecom/ITE compliance testing covers GR-1089-CORE and RBOC supplements (Verizon and AT&T), acoustic noise, bonding and grounding, DC power characteristics, and energy efficiency (TEER). International market approvals supported include FCC, CE (EN 61000-4-x series, CISPR 32/35, EN 55024), MIL-STD-461/462/464, MIL-STD-704, MIL-STD-1275, MIL-STD-1399 Section 300, RTCA DO-160, VCCI, BSMI, Korea MIC, IC ICES-003, IEEE C37.90.1/C37.90.2, ETSI EN 301 489, and AS/NZS CISPR 22. EMC/EMI engineering services include Electromagnetic Environmental Effects (E3) test and analysis of systems and platforms, EMC control plans, product design review and compliance risk assessments, EMI/EMC design hardening, pre-compliance testing, troubleshooting and mitigation, requirements gap analysis, and test plan and procedure development. All engineering work is supported by NARTE-certified engineers.
Accreditations
Testing Services
EsoEng LLC is an electronics engineering services company located at 2412 Irwin Street in Melbourne, Florida, offering PCB layout design, circuit design, and board-level EMC/EMI pre-compliance testing for medical, defense, industrial, and commercial markets. The company serves customers including AAA Engineering & Test Lab, BellaMia Technologies (medical devices), and Protodromics Inc. (aerospace, energy, and computation). PCB design services utilize Altium Designer and Altium365, producing designs from customer-supplied schematics with deliverables including fabrication archives (Gerber, NC drill, ODB++), assembly archives (pick-and-place, BOM), MCAD files (STEP and PARASOLID), and full project source archives. Circuit design services cover analog, digital, power electronics, optoelectronics/photonics, and RF circuit design using Altium Designer, LT Spice, and LINC2, with deliverables including schematic design, circuit simulations, worst case analysis, and MTBF reliability reports. Board-level EMC/EMI pre-compliance testing is performed using transverse electromagnetic (TEM) waveguides per EN IEC 61000-4-20:2022 for emissions and immunity, RF current probes on power and data lines for radiated emissions and immunity assessment, and LISNs for conducted emissions on power lines. Emission limits followed include CISPR 11 (EN 55011), EN IEC 60601-1-2 (medical), EN IEC 61000-2-3, and MIL-STD-461G. Mechanical design and custom electronics packaging services are also offered.
Testing Services
Industrial Inspection & Analysis (IIA) operates its dedicated wireless and EMC testing laboratory at 13146 NW 86th Drive, Suite 400 in Alachua, Florida, with roots at this location dating back to 1976. The Florida facility is IIA's center of excellence for electromagnetic compatibility, wireless, and RF compliance testing and certification, and is supported by a satellite office in Shenzhen, China for clients based in Asia. IIA is A2LA-accredited to ISO/IEC 17025:2017 (Certificate No. 0955.01) for testing and ISO/IEC 17065:2012 (Certificate No. 0955.02) for certification. The lab holds FCC Telecommunication Certification Body (TCB) designation (FCC Designation No. US1070, Test Firm No. 578780), EU Notified Body status (NB 1177), UK Approved Body status (AB 1177), Japan MIC Registered Certification Body (No. 217), ISED Canada test site registration (No. 2056A), Singapore IMDA designation (No. US0011), and Hong Kong OFCA recognition (No. US006). FDA ASCA program participation covers medical device EMC testing. EMC and wireless testing capabilities include EMC/EMI emissions and immunity, RF testing, susceptibility testing, product safety and electrical safety testing, LVD, CE safety, SAR, nerve stimulation, MPE, MIL-STD-461, RTCA/DO-160, automotive EMC, and environmental simulation including temperature, vibration, and mechanical shock. Wireless technologies covered span Bluetooth/BLE, Wi-Fi, LoRa, ANT+, Z-Wave, RFID, NFC, Zigbee, 4G LTE, marine radio and radar, FM broadcast transmitters, short-range devices, wireless power transfer, cellular boosters, cellular mobile devices, ISM equipment, U-NII, UWB, GMRS/FRS, CBRS, land mobile radio, radar detectors, remote control, radio microphones, unlicensed and licensed receivers, and digital devices. Certification and type examination services are available for FCC, ISED Canada, CE Mark (EMCD, RED), UKCA Mark, Japan MIC, OFCA Hong Kong, IMDA Singapore, and Australia ACMA. Global Market Access services cover IFT Mexico, RRA Korea, and other international markets. IIA's Florida EMC operation sits within a broader multi-discipline industrial testing and inspection organization headquartered in Alpharetta, Georgia, with over 32 offices across North America.