EMC testing labs in Massachusetts
Looking for EMC testing services in Massachusetts (MA)? This directory lists accredited EMC and EMI laboratories and consultancies with locations in Massachusetts—ideal for emissions and immunity testing, standards compliance, and pre-certification support. Explore geocoded sites on the map, then refine results by accreditation, test type, industry, and other filters. Open a lab profile for full capabilities, standards, and contact details.
Map shows one pin per geocoded address in Massachusetts. Right now: 4 locations across 4 labs.
Showing 4 of 109 labs
The Compliance Management Group (CMG) is an A2LA-accredited (ISO/IEC 17025, ILAC MRA) independent EMC testing laboratory located at 257 Simarano Drive in Marlborough, Massachusetts, operating since 2002. The lab holds accreditations and approvals from FCC, ISED Canada, VCCI (Japan), KCC (Korea), BSMI (Taiwan), MIC (Japan), ASTM, ISTA, and is ITAR registered. Markets supported include the United States, Canada, European Union, Australia, New Zealand, Japan, Korea, South Africa, Taiwan, and Vietnam. EMC emissions testing covers FCC Parts 15 and 18, ICES-001 and ICES-003, CISPR 11/22/32, EN 55011/55014/55022/55032, EN 61000-6-3/6-4, IEC 61800-3, VCCI V-2/V-3/V-4/VCCI-CISPR 32, AS/NZS CISPR 11/22/32, Korea KS C series, SANS 2332 (South Africa), CNS 13803/13438 (Taiwan), and Vietnam TCVN/QCVN standards. Immunity testing covers the full IEC/EN 61000-4 series including -4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11, -4-16, and -4-29, plus IEC/EN 61000-6-1/6-2, IEC 60601-1-2, IEC 61326-1/61326-2-6/61326-3-1, EN 55014-2/CISPR 14-2, EN 55024/CISPR 24, EN 55035/CISPR 35, ETSI EN 300 386, IEC 61800-3/61800-5-2, Factory Mutual 1321/1323, EN 50130-4, EN 50270, and corresponding Korea, Australia/New Zealand, and South Africa equivalents. Harmonics and flicker testing covers IEC/EN 61000-3-2 and IEC/EN 61000-3-3. Automotive EMC, medical device EMC (IEC 60601-1-2), CE Mark testing, pre-compliance testing, and environmental, vibration, shock, package, and product reliability testing are also offered. ISTA-certified package testing includes Amazon compliance testing. Customers include Bose, Boston Scientific, Northrop Grumman, Curtiss Wright Controls, Avid, and Hydrow.
Accreditations
Testing Services
Note: Packaging Compliance Labs / Quest Engineering Solutions is not an EMC test laboratory. This entry is included as a related testing resource given the facility's broad environmental, mechanical, and package testing capabilities that often complement EMC compliance programs. Packaging Compliance Labs, operating under the former Quest Engineering Solutions brand at 10 Cook Street, Billerica, Massachusetts, is a highly accredited testing laboratory with over 30 years of experience specializing in mechanical, environmental, and package testing services. The 10,000 sq ft facility is equipped with modern environmental chambers, electrodynamic and hydraulic vibration tables, shock test equipment, and a large hemi-anechoic chamber. Quest Engineering Solutions was acquired by Packaging Compliance Labs in 2025, which focuses on packaging design, package testing, and contract packaging for medical device and commercial manufacturers. Testing services include package testing (drop, compression, vibration, shock), ISTA package testing (including ISTA 6 for Amazon APASS and Walmart Marketplace compliance), ISTA 7D cold chain testing, medical package integrity testing and validation, temperature and humidity testing, thermal shock, accelerated aging, altitude testing, combined altitude and vibration testing, salt spray, ingress protection (IP) testing, materials testing (tensile and compression), stress screening, and paper and packaging materials testing. Industries served include pharmaceutical, medical instruments, military and aerospace components, and commercial and consumer products. Expedited testing, test protocol authoring, and reporting services are available for time-critical projects.
Accreditations
Test Site Services (TSS) is an EMC testing laboratory based in Milford, Massachusetts, with over 35 years of experience in the industry, providing compliance testing services since 1990. The lab is staffed by iNARTE EMC-certified engineers and offers testing and reporting for FCC, CISPR, the EU EMC Directive, the Medical Device Directive/Regulation, the Low Voltage Directive, and several additional international markets. TSS supports a range of testing needs including certification testing, pre-compliance scanning, and EMC troubleshooting, covering both emissions and immunity disciplines.