EMC Testing Labs in Belgium – Accredited Facilities
Belgium’s EMC listings span Flanders and Wallonia—university labs, innovation centres, and commercial automotive sites across both language regions.
8
Listed labs
2
Labs with listed accreditations
8
Metro areas
Accredited EMC labs in Belgium
8 listed facilities, 2 with accreditations on file.
ANPI (Association Nationale pour la Protection contre l'Incendie et le vol / National Fire and Intrusion Protection Association) is a Belgian non-profit testing, certification, and inspection organisation located at Granbonpré 1, Parc Scientifique Fleming, 1348 Louvain-la-Neuve, Belgium. Founded in fire and intrusion prevention, ANPI has grown into a broad-scope laboratory and certification body with specialised expertise in alarm/security systems EMC, fire protection, and building products. Their EMC laboratory features two anechoic chambers — a Fully Anechoic Room (FAR) measuring 7 m x 5 m x 3.4 m (original 1990 chamber, upgraded), and a larger chamber of 9.40 m x 6.40 m x 6 m acquired in 2000. Since 2017 they conduct emission and immunity tests up to 6 GHz.
Testing Services
BGEMC (Blue Guide EMC Lab) is an ISO 17025 accredited test laboratory (BELAC 082-TEST) located at Joseph Cardijnstraat 21, B-9420 Erpe-Mere, Belgium, for EMC, LVD (safety), and environmental testing. They offer compliant testing, pre-compliant testing, a debug corner for EMC troubleshooting, advice and support, and EMC training courses. Test rooms are also available for hourly reservation.
Accreditations
Testing Services
FMEC is the service lab of the M-Group at KU Leuven Bruges Campus (Spoorwegstraat 12, 8000 Bruges), originally founded by Prof. Dr. Ir. Johan Catrysse in 1984 as an expertise centre on EMC. In 1991 it became a complete EMC laboratory providing support and test facilities to industry. FMEC focuses on pre-compliance EMC, RED, shielding effectiveness, and reliability testing of electronic products, with over 35 years of experience and is considered one of the pioneers in Flanders, especially with respect to shielding effectiveness.
Testing Services
L.E.T. NV is an automotive calibration and testing equipment company located at Vaartlaan 20, 9800 Deinze, Belgium. They have the equipment and facilities to perform EMC tests, but explicitly state they provide test reports but no certificates. Their core business is automotive headlamp aiming systems (Luminoscope brand), sensor aiming, and calibration equipment for automotive assembly plants, workshops, and government inspection centres. EMC testing is an ancillary service used primarily to support their own product development and for nearby industry.
Testing Services
Laboratoria De Nayer v.z.w., originating from 1976, provides testing and certification services to industrial manufacturers of electrical and electronic products. They assist product managers and developers in maximizing EMC, safety and reliability of their products and acquiring full compliance with directives valid in specific regions in the world. Labo De Nayer supports a broad range of civil, telecom, military, space and automotive standards and offers a diversity of full compliant test rooms, and can even support flexible engineering measurements on site. They act as Notified Body for EMCD, are a CAB for FCC (US), and are accredited for Australia, New Zealand, and Canada.
Accreditations
Testing Services
Lemcko is the EMC research and testing group of the Department of Electromechanical, Systems and Metal Engineering at Ghent University (UGent), located at Graaf Karel de Goedelaan 5, 8500 Kortrijk. They measure electromagnetic interference (EMI), EMI-related malfunctions, and perform pre-compliance EMC testing for both emission and immunity, and offer EMC assessment on large machines, design optimization, communication problem solving, and power electronics EMI consulting.
Testing Services
Multitel Innovation Centre is an applied research and innovation centre located at Rue Pierre et Marie Curie 2, 7000 Mons, Belgium. Their EMC & ETSI Test Services are explicitly positioned as pre-compliance testing for equipment under development, covering military, aeronautic, aerospace, automotive, industrial, multimedia, and electronics products. The anechoic chamber capability extends to 87 GHz shielding effectiveness, making it one of the more capable pre-compliance chambers in Belgium.
Testing Services
The CEM laboratory of the University of Liège (Montefiore Institute, Faculty of Applied Sciences) performs tests on electrical appliances in conformity with international and European standards. With over 150 industrial references, the lab provides testing services compliant with the European EMC Directive 2014/30/EU. The measurement system is software-driven for fast full-compliant tests or manual for R&D. The lab is ISO/IEC 17025 accredited (BELAC certificate 222-TEST) and also offers pre-compliance testing and standards consultancy. Notable clients include Thales, Alstom, FN Herstal, IBA, SNCB, CMI Defence, and Hitachi ABB Power Grids.
Testing Services
Start on this country page, then open Flanders or Wallonia when language, plant location, or university partnership matters for the CE file.
Major metro areas
Listed facilities in Belgium are concentrated around these cities and suburbs.
- Brugge
- Deinze
- Erpe-Mere
- Kortrijk
- Liège
- Louvain-la-Neuve
- Mons
- Sint-Katelijne-Waver
Common test types requested in Belgium
Drawn from listed lab capabilities and the work teams in this region typically book.
- Pre-Compliance Testing
- Radiated Emissions
- Conducted Emissions
- EFT/Burst
- ESD
- Radiated Immunity
- Conducted Immunity
- Surge Immunity
Automotive, industrial, and university EMC
Automotive and industrial electronics are common drivers. University and research labs appear more often than in some neighboring countries—confirm whether the report letterhead matches what your customer expects.
Flanders vs. Wallonia
Choose by plant address and language of the project team. Confirm BELAC or equivalent accreditation for commercial CE files. Ask who signs if a university lab is involved.
Frequently asked questions
Quick answers about EMC testing in Belgium