E3 Compliance

About

E3 Compliance is an ITAR-registered independent EMC engineering and testing company located at 227 Winter Ave NW in Grand Rapids, Michigan, operating a ~6,000 sq ft EMC lab. The company is staffed by iNARTE-certified EMC Engineers and iNARTE-certified EMC Master Designers, and holds Joint Certification Program (JCP) registration for defense work. E3 serves automotive, aerospace, defense, consumer, medical, industrial, office, and space/satellite industries. The lab performs pre-compliance EMC testing, diagnostics, and design validation across an exceptionally broad range of standards. Automotive OEM specifications supported include Aptiv, BMW (GS95002/GS95003/GS95024), Daimler, Daimler Truck, FCA/Stellantis, Fisker, Ford, GM (GMW3097/GMW3172), Harley Davidson, Honda, Hyundai, JLR, John Deere, Mazda, Mercedes, Motional, Navistar, Nissan, PACCAR, Polaris, PSA, Renault/Nissan, Rivian, Subaru, Tesla, Toyota, Vinfast, Volvo, and VW. Automotive international standards include CISPR 25, ECE R10, ISO 11452, ISO 13766, ISO 14982, ISO 7637, ISO 16750, ISO 10605, and SAE J1113. CE Mark-related testing covers EN 55011/CISPR 11, EN 55014/CISPR 14, EN 55015/CISPR 15, EN 55022/CISPR 22, EN 55024/CISPR 24, EN 55032/CISPR 32, EN 55035/CISPR 35, IEC 60335-1, IEC 61326-1, IEC 61000-3-2, IEC 61000-3-3, and the full IEC 61000-4 immunity series including -4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11, -4-12, -4-20 (TEM cell), -4-21 (reverberation chamber), and -4-28. Medical EMC testing covers IEC 60601-1-2. FCC testing covers Part 15 Subparts B and C and Part 18. ISED Canada testing covers RSS-102, RSS-210, RSS-Gen, ICES-003, ICES-005, and ICES-GEN. Defense and aerospace standards include MIL-STD-461, MIL-STD-1275, RTCA/DO-160, and ISO 14302. Additional standards covered include UL 991, UL 60730-1, DNV 2.4 (automation and instrumentation), IEC 61000-6-1 through -6-4, IEC 62684, IEC 60945 (maritime), ANSI C12.1 (power meters), IEC 61967 (integrated circuits), and shielding effectiveness to ANSI/SCTE 48 and IEEE Std 299.1. In addition to chamber testing, E3 offers EMC design consulting including schematic and PCB layout review, EMC simulations, signal integrity and power integrity analysis, circuit analysis, and timing analysis. The lab maintains an in-house component kit inventory with soldering benches for on-the-spot prototype modifications and solution validation during test sessions. E3 explicitly notes that it does not perform FCC or CE certification — testing is pre-compliance and diagnostic in nature, oriented toward design validation and margin verification ahead of formal accredited testing.

Accreditations

Testing Services

Industries Served