EMC Latest
← Back to Labs Directory
Forth EMC Services Ltd

Forth EMC Services Ltd

Livingston, West Lothian, United Kingdom

+44 131 603 6600

Unit 19A, Nasmyth Court, Houston Industrial Estate, Livingston, West Lothian, EH54 5EG, United Kingdom

1 / 2

About

Forth EMC Services is a Würth-supported EMC pre-compliance and troubleshooting lab at Nasmyth Court on the Houston Industrial Estate in Livingston, West Lothian. The team comes from electronics product development and PCB design, so the lab is set up to get products through formal EMC testing quickly rather than to issue accredited reports. Its fully anechoic, MIL-STD-shielded chamber is lined with ferrite tiles and matched hybrid absorber and is more than 7 m long externally, allowing 3 m measurements. Independent third-party calibration data for the chamber is available to customers. Radiated emissions and radiated immunity (IEC 61000-4-3) are done in the chamber. Conducted emissions (CISPR 22 / EN 55022), conducted RF immunity (EN 61000-4-6), EFT/burst (EN 61000-4-4, typically 2 kV and up to 4.8 kV), surge (EN 61000-4-5) and dips and interruptions (EN 61000-4-11) are also covered. A dedicated ESD area has horizontal and vertical coupling planes and tests to EN 61000-4-2 up to 16.5 kV air and 9 kV contact. Testing is set to product standards including EN 61000-6-1 and -6-2, EN 55014, EN 55015, EN 55020 and EN 55024. An on-site debug bench has oscilloscopes, a spectrum analyser, near-field probes, rework stations and a stocked rack of Würth ferrites and shielding gaskets, so fixes can be tried and retested the same day.

Testing Services

Test TypeApplicable Standards
Pre-Compliance TestingEN 61000-6-1, EN 61000-6-2, EN 55014, EN 55015, EN 55020, EN 55024
Radiated EmissionsEN 55022 / CISPR 22, EN 55014-1, EN 55015
Conducted EmissionsCISPR 22 / EN 55022
Radiated ImmunityIEC 61000-4-3
Conducted ImmunityEN 61000-4-6
ESDEN 61000-4-2
EFT/BurstEN 61000-4-4
Surge ImmunityEN 61000-4-5
Voltage Dips/InterruptsEN 61000-4-11

Certifications / Marks

Certification
CE
UKCA

Industries Served

Industry
Industrial Equipment
Household Appliances
Information Technology
Multimedia
Lighting Products
Consumer Electronics

Major Equipment

Equipment
Fully anechoic chamber (3 m, ferrite + hybrid absorber, MIL-STD shielding)
ESD test area with HCP/VCP
EFT generator to 4.8 kV
Surge generator
Spectrum analyser and near-field probes
Würth EMC component stock