EMC Latest
← Back to Labs Directory
telproCE - Laboratorio EMC y Marcado CE, S.L.

telproCE - Laboratorio EMC y Marcado CE, S.L.

Valldoreix, Sant Cugat del Valles, Catalonia, Spain

+34 935 893 569

Avinguda Ca n'Enric 39, Valldoreix, Sant Cugat del Valles, Catalonia, 08197, Spain

1 / 3

About

telproCE, operating since 1986 at Valldoreix in Sant Cugat del Valles just outside Barcelona, is an independent Catalan laboratory built specifically around CE marking for electrical and electronic equipment. The 150 square metre facility is screened from external interference and centred on an anechoic chamber covering an exceptionally wide 9 kHz to 32 GHz, able to take equipment up to 3 metres long by 1.2 metres wide by 2 metres high at up to 75 kilograms, alongside a climate chamber running from minus 42 to plus 180 degrees Celsius across the full 0 to 100 per cent humidity range for products up to 50 centimetres cubed. Test coverage spans EMC under Directive 2014/30/EU, radio equipment under the Radio Equipment Directive, SAR measurement for human exposure to electromagnetic fields, electrical safety, and the IP ingress and IK impact protection ratings to EN 60529 and EN 62262, with conducted immunity covering fast transients, surge and RF-induced disturbance. The commercial model is the distinguishing feature: the laboratory sells a complete CE marking test programme delivered in ten working days, individual tests, investigative diagnostic sessions, and laboratory time rented in three-hour-forty-five-minute slots so a customer's own engineers can work in the chamber - an unusual and practical offer for a development team iterating hardware. Specialisations are turnkey CE marking programmes, radio and wireless products, SAR and exposure assessment, and chamber rental for customer-run development testing.

Testing Services

Test TypeApplicable Standards
Radiated EmissionsCISPR 32, EN 55032, CISPR 11, EN 55011, CISPR 14-1, EN 55014-1, EN 61000-6-3, EN 61000-6-4, ETSI EN 301 489-1
Conducted EmissionsCISPR 32, EN 55032, CISPR 11, EN 55011, CISPR 14-1, EN 55014-1, EN 61000-6-3, EN 61000-6-4
Radiated ImmunityIEC 61000-4-3, EN 61000-4-3, EN 55035, EN 61000-6-1, EN 61000-6-2, ETSI EN 301 489-1
Conducted ImmunityIEC 61000-4-6, EN 61000-4-6, EN 55035, EN 61000-6-1, EN 61000-6-2
ESDIEC 61000-4-2, EN 61000-4-2
EFT/BurstIEC 61000-4-4, EN 61000-4-4
Surge ImmunityIEC 61000-4-5, EN 61000-4-5
Harmonics & FlickerIEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3
Voltage Dips/InterruptsIEC 61000-4-11, EN 61000-4-11
Power Frequency Magnetic FieldIEC 61000-4-8, EN 61000-4-8
SAR TestingEN 62479, EN 50663, EN 50566, IEC 62209-2, EN 62311
Pre-Compliance TestingCISPR 32, IEC 61000-4-3, ETSI EN 300 328, EN 61000-6-1
Radio Equipment TestingETSI EN 300 328, ETSI EN 300 220, ETSI EN 300 330, ETSI EN 301 893, ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI EN 301 489-17
Product SafetyEN 62368-1, EN 61010-1, EN 60335-1, EN 60529, EN 62262
Environmental TestingIEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-78, EN 60529
Mechanical TestingEN 62262, IEC 60068-2-75

Certifications / Marks

Certification
CE
UKCA

Industries Served

Industry
Consumer Electronics
Industrial Equipment
Information Technology
Radio & Wireless
Medical Devices
Energy & Power
Household Appliances

Major Equipment

Equipment
Anechoic chamber 9 kHz - 32 GHz, EUT to 3 m x 1.2 m x 2 m and 75 kg
150 m2 laboratory screened from external interference
Climate chamber -42 C to +180 C, 0 - 100 % RH, 50 x 50 x 50 cm
EMI receiver
Spectrum analyser
LISN
CDN
ESD simulator
EFT/burst generator
Surge generator
Harmonics and flicker analyser
RF immunity amplifiers and antennas
SAR measurement system
IP ingress protection test rigs
IK impact test equipment
Electrical safety test benches