
Description
The TTW-400A is an automated, above-ground Com-Power turntable for radiated emissions testing. The top is non-reflective wood, 4 ft (1.2 m) across and 9 in (22.8 cm) high. Distributed load capacity is 1,100 lb (500 kg). Com-Power rates the construction for indoor and outdoor use, including chambers and open-area sites.
Azimuth is programmed through the AMTTC-300 controller over a fiber-optic duplex versatile-link connection. A 10 m duplex plastic-optical-fiber cable is supplied, and a 30 m cable is optional. The controller provides three user-settable speeds. Position resolution is 1 degree and positioning accuracy is under 0.5 degree. A toggle switch on the motor box is the manual backup. Supply power is 100-240 VAC, 50/60 Hz, 480 VA maximum, with a 2 A time-delay fuse. The operating range is 5°C to 40°C.
The turntable is intended to run with a Com-Power antenna mast as part of an automated measurement setup.
Product Specifications
Product Details
| Part Number | TTW-400A |
| Manufacturer | Com-Power Corporation |
General Parameters
| Diameter | 1.2 m |
| Load capacity | 1100 lb (498.95 kg) |
| Installation | Surface-mount |
| Drive | Electric |
| Positioning accuracy | < 0.5° |
| Table height | 228 mm |
| Top surface |





