
Description
The ETS-Lindgren 2165 LoPro is one turntable in two sizes: 2165-1.21 is 1.2 m and 2165-2.01 is 2.0 m. Both have a PVC and ABS top 5.0 cm high, so the surface sits almost level with the floor and no pit is required. The table can be taken apart and moved, or bolted down through holes in the base. It is for indoor use. Outdoor use is described only when the table is protected from rain and moisture. Distributed load is 273 kg (602 lb) at either diameter. A point load on an area smaller than 0.192 m² (2.0 ft²) is limited to 100 kg (220 lb).
A toothed belt and electric drive rotate the table continuously. The physical table lists 0.5 to 2.0 rpm, and the electrical section lists a maximum of 2.5 rpm. Positioning accuracy is ±0.5°. Control is fiber optic. An EMCenter with an EMControl card is sold separately. The model table lists 3 A on single-phase 220/230 VAC, 50/60 Hz, through an IEC 60320 C-14 inlet. The electrical header also states less than 10 A. The drive assembly is specified 20 dB below the CISPR 11 Class B limits. Operating temperature is 5°C to 40°C. A 10 m fiber-optic cable and ST bulkhead connectors are included. An optional shaft kit can place the drive motor as far as 5 m from the table.
Product Specifications
Product Details
| Part Number | 2165 |
| Manufacturer | ETS Lindgren |
General Parameters
| Diameter | 1.2 m, 2 m |
| Load capacity | 273 kg (601.9 lb) |
| Installation | Surface-mount |
| Drive | Electric |
| Rotation range | Continuous |
| Rotation speed | 0.5 to 2 rpm |
| Positioning accuracy |





