
Description
The ETS-Lindgren 2181 is one heavy-duty turntable series. The sizes are 2181-2.03 at 2.0 m and 1,500 kg (3,307 lb), 2181-3.03 at 3.0 m and 4,000 kg (8,818 lb), 2181-4.03 at 4.0 m and 6,000 kg (13,228 lb), 2181-5.03 at 5.0 m and 6,800 kg (14,991 lb), and 2181-6.03 at 6.0 m and 9,000 kg (19,842 lb). The aluminum top is 44.8 cm high, taller than the 2187 so more cable can pass through the center plate, and a bronze ground brush couples it to the ground plane. A point load on an area smaller than 0.372 m² (4.0 ft²) is limited to 500 kg (1,110 lb).
Four of the diameters list an electric drive from 0.5 to 2.0 rpm. The 4.0 m model’s RPM cell prints 1.2 m (3.94 ft) instead of a speed. Rotation is continuous or limited by adjustable fiber-optic switches, and positioning accuracy is ±0.5°. Control is fiber optic, for an EMCenter with an EMControl card. Supply power is 220/230 VAC, 50/60 Hz, and current consumption is listed as 10 A. The drive assembly is specified 20 dB below the CISPR 11 Class B limits. Operating temperature is 5°C to 40°C. A 10 m fiber-optic cable and a bulkhead penetration kit are included. Outdoor installation, a four-wheel dyno platform, a slip ring, and a custom diameter are options, so none of those is part of the standard model.
Product Specifications
Product Details
| Part Number | 2181 |
| Manufacturer | ETS Lindgren |
General Parameters
| Diameter | 2 m, 3 m, 4 m, 5 m, 6 m |
| Installation | Surface-mount |
| Drive | Electric |
| Rotation range | Continuous, or limited by adjustable fiber-optic switches |
| Rotation speed | 0.5 to 2 rpm |
| Positioning accuracy | ±0.5° |
| Table height |





