
Description
The ETS-Lindgren 2187 is one turntable series in two sizes: 2187-2.03 is 2.0 m and rated for 1,000 kg (2,204 lb), and 2187-3.03 is 3.0 m and rated for 1,200 kg (2,645 lb). It is for an indoor chamber with a shallow floor install. Both are taller than the 2188, at 27.6 cm, so more EUT cable can pass through the center plate. The aluminum top uses a bronze ground brush for a continuous connection to the ground plane. A point load on an area smaller than 0.372 m² (4.0 ft²) is limited to 500 kg (1,110 lb).
An electric drive turns either size from 0.5 to 2.0 rpm, continuously or between adjustable fiber-optic travel limits. Positioning accuracy is ±0.5°. Control is fiber optic, for an EMCenter with an EMControl card. Supply power is 220/230 VAC, 50/60 Hz, and current consumption is listed as 10 A. The drive assembly is specified 20 dB below the CISPR 11 Class B limits. Operating temperature is 5°C to 40°C. A 10 m fiber-optic cable and a bulkhead penetration kit are included. A slip ring, custom center plate, extra diameters, and edge outlets are options, so a slip ring is not part of the standard model.
Product Specifications
Product Details
| Part Number | 2187 |
| Manufacturer | ETS Lindgren |
General Parameters
| Diameter | 2 m, 3 m |
| Installation | Surface-mount |
| Drive | Electric |
| Rotation range | Continuous, or limited by adjustable fiber-optic switches |
| Rotation speed | 0.5 to 2 rpm |
| Positioning accuracy | ±0.5° |
| Table height |





