
Description
The ETS-Lindgren 2188 is one LoPro turntable series sold as four model numbers: 2188-1.03 (1.0 m), 2188-1.23 (1.2 m), 2188-1.53 (1.5 m), and 2188-2.03 (2.0 m). It is for an indoor chamber where a deep pit is not practical. Every size has an aluminum top 16.5 cm high and a bronze ground brush that keeps the top coupled to the ground plane. Distributed load is 500 kg (1,102 lb) at each diameter. A point load on an area smaller than 0.372 m² (4.0 ft²) is limited to 500 kg (1,110 lb).
An electric drive turns the table from 0.5 to 2.0 rpm, either continuously or between fiber-optic limit switches that are set from the top. Positioning accuracy is ±0.5°. Control is a fiber-optic duplex ST link for an EMCenter with an EMControl card. The model table lists 2 A, while the electrical line states 220–230 VAC, 50–60 Hz, less than 10 A, through an IEC 60320 C-14 inlet. The drive assembly is specified 20 dB below the CISPR 11 Class B limits. Operating temperature is 5°C to 40°C. A 10 m fiber-optic cable and ST bulkhead connectors are included. A custom center plate is optional.
Product Specifications
Product Details
| Part Number | 2188 |
| Manufacturer | ETS Lindgren |
General Parameters
| Diameter | 1 m, 1.2 m, 1.5 m, 2 m |
| Load capacity | 500 kg (1102.3 lb) |
| Installation | Surface-mount |
| Drive | Electric |
| Rotation range | Continuous, or limited by adjustable fiber-optic switches |
| Rotation speed | 0.5 to 2 rpm |
| Positioning accuracy |





