ARRAA Labs (ARRAA Energy Pvt Ltd)
Chennai, Tamil Nadu, India
+91 90433 23091No. 16/1A1, Puduper Pallam Village, Nandhampakkam Post, Kundrathur, Chennai, Tamil Nadu, 600069, India
About
ARRAA Labs, operated by ARRAA Energy Pvt Ltd, is a NABL-accredited testing laboratory at Kundrathur on the south-western edge of Chennai, Tamil Nadu, and is one of the newer independent EMC facilities serving southern India's electronics and automotive supply base. It is built as a single-roof compliance house: EMI and EMC measurement sits alongside environmental simulation, vibration and durability testing, relay testing, and product inspection and certification support, so a manufacturer can take a product through electromagnetic, climatic and mechanical qualification in one engagement rather than coordinating three vendors - a point its customers single out, along with reliable turnaround against promised dates. The laboratory is NABL accredited, which in India means assessment to ISO/IEC 17025 by the National Accreditation Board for Testing and Calibration Laboratories, and the facility is recent, with modern instrumentation installed rather than inherited. Testing covers the conducted and radiated emission measurements and the full IEC 61000-4 immunity series that underpin Indian IS standards, CE marking and the automotive AIS requirements, with vehicle-level and component automotive work supported alongside the industrial and medical caseload. Specialisations are electrical and electronic product compliance, automotive vehicle and component testing, medical equipment, protection relays, and combined EMC with vibration and environmental qualification.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| NABL |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 11, CISPR 14-1, CISPR 32, CISPR 25, IS 6873, EN 55011, EN 55032, IEC 61000-6-3, IEC 61000-6-4, AIS 004 (Part 3) |
| Conducted Emissions | CISPR 11, CISPR 14-1, CISPR 32, CISPR 25, EN 55011, EN 55032, IEC 61000-6-3, IEC 61000-6-4 |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, CISPR 35, IEC 61000-6-1, IEC 61000-6-2, ISO 11452-2, AIS 004 (Part 3) |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, CISPR 35, IEC 61000-6-1, IEC 61000-6-2, ISO 11452-4 |
| Radiated Susceptibility | ISO 11452-2, ISO 11452-3, IEC 61000-4-3 |
| Conducted Susceptibility | ISO 11452-4, ISO 7637-2, IEC 61000-4-6 |
| ESD | IEC 61000-4-2, EN 61000-4-2, ISO 10605 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5 |
| Harmonics & Flicker | IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11, IEC 61000-4-29 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8 |
| Pre-Compliance Testing | CISPR 11, CISPR 32, IEC 61000-4-3, CISPR 25, AIS 004 (Part 3) |
| Medical Device EMC | IEC 60601-1-2, EN 60601-1-2 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 11452-4, ISO 7637-2, ISO 10605, AIS 004 (Part 3) |
| Automotive Vehicle-Level EMC | AIS 004 (Part 3), CISPR 12, ISO 11451-2, UN-ECE R10 |
| Environmental Testing | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-78, IEC 60529 |
| Mechanical Testing | IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-64, IS 9000 |
Certifications / Marks
| Certification |
|---|
| CE |
| BIS |
| AIS / CMVR compliance |
Industries Served
| Industry |
|---|
| Automotive |
| Consumer Electronics |
| Medical Devices |
| Industrial Equipment |
| Energy & Power |
| Information Technology |
Major Equipment
| Equipment |
|---|
| Semi-anechoic EMC chamber |
| Shielded enclosure |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Harmonics and flicker analyser |
| RF immunity amplifiers and antennas |
| Automotive transient generator (ISO 7637) |
| Vibration and durability test rigs |
| Environmental and climatic chambers |
| Protection relay test bench |
