EMC Testing Labs in India – Accredited Facilities

ARRAA Labs (ARRAA Energy Pvt Ltd)

Website →

ARRAA Labs, operated by ARRAA Energy Pvt Ltd, is a NABL-accredited testing laboratory at Kundrathur on the south-western edge of Chennai, Tamil Nadu, and is one of the newer independent EMC facilities serving southern India's electronics and automotive supply base. It is built as a single-roof compliance house: EMI and EMC measurement sits alongside environmental simulation, vibration and durability testing, relay testing, and product inspection and certification support, so a manufacturer can take a product through electromagnetic, climatic and mechanical qualification in one engagement rather than coordinating three vendors - a point its customers single out, along with reliable turnaround against promised dates. The laboratory is NABL accredited, which in India means assessment to ISO/IEC 17025 by the National Accreditation Board for Testing and Calibration Laboratories, and the facility is recent, with modern instrumentation installed rather than inherited. Testing covers the conducted and radiated emission measurements and the full IEC 61000-4 immunity series that underpin Indian IS standards, CE marking and the automotive AIS requirements, with vehicle-level and component automotive work supported alongside the industrial and medical caseload. Specialisations are electrical and electronic product compliance, automotive vehicle and component testing, medical equipment, protection relays, and combined EMC with vibration and environmental qualification.

ConsultancyAbsolute Veritas

Website →

Absolute Veritas is an Indian regulatory compliance and certification consultancy based at Molar Band Extension in Badarpur, South Delhi, with more than fifteen years in the field. It is important to be clear about what it is: the company does not operate its own EMC chambers. It states that it has partnered with laboratories in India and abroad and provides lab test liaisoning, coordinating test programmes and managing the interface with auditors and certifying authorities on a client's behalf. For a manufacturer that needs a compliance outcome rather than chamber time, that is a distinct and useful service, and the firm's published EMC scope reflects the programmes it manages: harmonic current emission, voltage flicker and fluctuation, conducted emission on both mains and telecom ports, radiated emission, electrostatic discharge, radiated susceptibility, power and pulsed magnetic field immunity, electrical fast transient, surge and conducted RF immunity, assessed against the EMC Directive 2014/30/EU and the IEC and EN 61000 families. Its real depth is in Indian and regional market access: BIS certification including the ISI mark and the Foreign Manufacturers Certification Scheme, TEC for telecom equipment, WPC wireless approvals, CDSCO for medical devices and FSSAI for food contact, with quality control and inspection services extended across twelve Asian countries. No accreditation of its own is published, which is consistent with a consultancy rather than a test house. Specialisations are BIS and FMCS certification, TEC and WPC approvals, CDSCO registration, third-party inspection, and managed EMC test programmes for European, Australian, Japanese and North American markets.

Alpha Test House

Website →

Alpha Test House is a broad-scope Indian analytical testing and certification laboratory at Paschim Vihar in west New Delhi, serving Delhi NCR, Haryana and Chandigarh. The organisation states that it is accredited by NABL and approved by the Bureau of Indian Standards, and operates an ISO 9001:2015 quality system; its NABL scope documentation is not published on its website, so whether electromagnetic compatibility falls inside the accredited scope could not be confirmed - much of the laboratory's visible reputation rests on toy testing, where it is described as a NABL-accredited facility, alongside environmental and water analysis. The disciplines offered run to more than thirty, from EMI/EMC and RF and wireless through consumer durables, telecom, LED and luminaires, IT and electronics, wire and cable, batteries and UAV and drone testing, to footwear, toys, road and building materials, metals and alloys, non-destructive testing, microbiology, textiles, food and agricultural produce, water, soil and geotechnics, environmental and pollution monitoring, chemicals and fertilisers. On the EMC side the published standard set covers CISPR 11, 12, 15, 25 and 32 for emissions and the IEC and EN 61000-4 series for immunity, including the magnetic field and voltage interruption parts, with shielding effectiveness measurement offered as a distinct service - unusual in a general-purpose laboratory and useful for enclosure and cabinet manufacturers. Note that a second Alpha Test House address exists nearby at Peera Garhi, so confirm which site performs EMC work before shipping hardware. Specialisations are multi-discipline Indian regulatory compliance, toys and consumer products, LED and lighting, cables and batteries, and shielding effectiveness measurement.

Argus Embedded Systems Pvt Ltd (AESPL)

Website →

Argus Embedded Systems, founded in 2011 and headquartered at Jubilee Hills in Hyderabad, Telangana, is an electronic product engineering and electronics manufacturing services (ESDM) company that offers EMI and EMC work as an engineering discipline alongside its design and build business, with global delivery centres in the United States, United Kingdom, Germany, France, the UAE, Saudi Arabia and Australia. Its EMC offering is design-led rather than certification-led: board and system-level analysis, electromagnetic simulation, design review and compliance assessment, and EMI/EMC testing of printed circuit boards, populated assemblies and complete electronic systems - the emphasis being on locating and fixing a coupling or emission problem in the layout before a formal campaign. The published programme is unusually defence-weighted for an Indian engineering house, naming specific MIL-STD-461F test methods - CE102, RE101 and RE102 for emissions, and CS101, CS114, CS116, RS101 and RS103 for susceptibility - alongside the IEC and CISPR commercial families and the FCC, Canadian ICES-003 and Japanese VCCI regulatory sets, with magnetic field simulation, impulse and insulation resistance measurement also offered. The company holds AS9100D certification for its manufacturing operations covering printed circuit board assemblies, electromechanical and cable assemblies and box build, but publishes no ISO/IEC 17025 or NABL accreditation for a test laboratory and does not describe owned chambers, so it is recorded here without an accreditation entry and is best understood as an EMC engineering and managed-test provider rather than an accredited test house. Specialisations are aerospace and defence electronics, PCB and system-level EMC design, electromagnetic simulation, and railway, medical and industrial embedded hardware.

Astra Microwave Products Ltd - EMI/EMC Test Facility

Website →

Astra Microwave Products, founded in 1991 and headquartered at Astra Towers in Kothaguda near HITEC City, Hyderabad, is one of India's major private radar and microwave subsystem manufacturers for the defence and space sectors, and it operates its EMI/EMC facility as an accredited service available to external customers as well as its own programmes. The laboratory holds NABL accreditation to ISO/IEC 17025:2017 under laboratory identification TC-6264. Its shielded semi-anechoic chamber measures 6.7 by 6.1 by 3.75 metres with shielding effectiveness better than 100 dB and covers 10 kHz to 40 GHz, with radiated susceptibility fields to 60 V/m - a specification built for airborne and shipborne radar hardware rather than commercial electronics. The test programme is correspondingly military: the MIL-STD-461 method set run here includes conducted emissions on power leads (CE01, CE03, CE101 and CE102), radiated emissions in both magnetic and electric field modes plus antenna terminal emissions, conducted susceptibility on power leads, antenna ports and by bulk cable injection including intermodulation and transient methods, and radiated susceptibility from 14 kHz to 40 GHz. Beyond EMC proper, the facility measures aircraft electrical power characteristics to MIL-STD-704 revisions D, E and F, and performs shipboard DC magnetic field testing - both capabilities that are rare outside national defence laboratories. The company is chaired by Dr. Avinash Chander, former Director General of DRDO, under managing director Dr. Maram Venkateshwar Reddy. Specialisations are radar and microwave subsystems, airborne and shipborne defence electronics, space hardware, meteorology and homeland security systems.

Astute Labs Pvt. Ltd.

Website →

Astute Labs, incorporated in March 2012 and based at the Bajirao Dhawade Patil Industrial Estate on NDA Road in Shivane, south-west Pune, is a NABL-accredited laboratory whose centre of gravity is medical device compliance. Its regulatory footing is unusually complete for the Indian medical sector: NABL accreditation to ISO/IEC 17025, recognition by the Bureau of Indian Standards, approval by the Central Drugs Standard Control Organisation (CDSCO) - which is what allows its reports to support Indian medical device registration - and QAI recognition. The core work pairs electrical safety testing to IEC 60601-1 with electromagnetic compatibility to IEC 60601-1-2, the combination a medical device manufacturer needs in a single engagement, and customers single out the laboratory's strength in exactly that pairing. Beyond medical devices it tests IT and audio-video products and performs RoHS substance analysis, and it offers shielding effectiveness measurement as a discrete service. The company also presents itself as an EMC equipment manufacturer alongside its testing business, so test fixtures and jigs can be built in-house. Specialisations are medical and connected medical device EMC and safety, IEC 60601-1 and 60601-1-2 programmes, CDSCO and BIS registration support, IT and audio-video products, and RoHS compliance.

Auraexcel Private Limited (AuraXL)

Website →

AuraXL, the trading name of Auraexcel Private Limited, is an automotive-focused EMI/EMC testing and consultancy business operating from Terminal ONE in the Rajiv Gandhi Infotech Park at Hinjawadi, Pune - placing it inside the engineering corridor that serves India's western automotive cluster. The company states its ambition as building a world-class EMI/EMC facility in India meeting the highest global standards, and its published service set is full compliance testing on automotive components: radiated and conducted emissions, radiated and conducted immunity, electrostatic discharge and surge immunity, measured against the CISPR 25 and ISO 11452 families that automotive tier suppliers work to. It pairs that with consultancy and training, which is how a substantial part of its customer base - automotive OEMs and their suppliers - engages it: design review and failure diagnosis as much as certification. Customers describe calibrated equipment and experienced engineers. An ISO 9001:2008 quality system is published but no NABL accreditation was found, so the laboratory is recorded here without an accreditation entry. Note that the company's own websites could not be retrieved during research - both auraxl.in and auraxl.com refused automated access - so the capability detail here is drawn from directory listings and verified business records rather than from AuraXL's own pages, and the scope may be broader than shown. Specialisations are automotive component EMI/EMC, EMC consultancy and training for automotive OEMs and tier suppliers, and pre-compliance diagnosis.

Avartanam Test Labs LLP

Website →

Avartanam Test Labs is a NABL-accredited RF and EMC laboratory in the GIDC industrial estate at Vallabh Vidyanagar near Anand in Gujarat, with over ten years of operating experience. Its distinguishing capability within India's independent laboratory sector is radio measurement depth rather than chamber size: alongside conventional conducted and radiated emission, electrostatic discharge and surge testing, it performs antenna radiation pattern measurement and over-the-air total radiated power and total isotropic sensitivity (TRP and TIS) characterisation from 370 MHz to 6 GHz, plus VSWR and return loss analysis - the measurements that decide whether a wireless product actually performs, as distinct from whether it merely passes emission limits. Accreditation and designation cover NABL to ISO/IEC 17025:2017, Bureau of Indian Standards recognition, and WPC type approval from the Wireless Planning and Coordination wing, so Indian wireless market access can be closed out in-house; the firm is also MSME Udyam registered and DPIIT-recognised under Startup India. Turnaround on RF work is advertised at three to seven days. The engineering offer extends past measurement into RF filter design, custom antenna development, board design review, test jig calibration and consultancy for CE, FCC and BIS certification, and published customer work spans Wi-SUN data concentrator units and network interface cards, electric vehicle chargers with power line communication, and medical devices. Specialisations are wireless and IoT product RF and OTA measurement, WPC and BIS type approval, smart metering and EV charging equipment, and antenna design and tuning.

BE Analytic Solutions LLP

Website →

BE Analytic Solutions is a NABL-accredited test laboratory in the Devasandra Industrial Estate at Mahadevapura in east Bengaluru, additionally accredited by the DGAQA - the Indian Ministry of Defence's Directorate General of Aeronautical Quality Assurance - for automotive, aerospace and defence work, which is the credential that opens Indian defence programmes to it. Its EMC scope is the deepest military method set of any laboratory in this directory outside the dedicated national facilities: the MIL-STD-461 programme covers CE101 and CE102 conducted emissions, CS101 and CS114 through CS118 conducted susceptibility - including the lightning induced transient and personnel-borne electrostatic discharge methods added in revision G - RE101 and RE102 radiated emissions, and RS101 through RS103 radiated susceptibility. Alongside that it runs the automotive families (CISPR 25, ISO 7637, ISO 10605 and ISO 11452), the commercial and industrial CISPR 11, 15, 25 and 32 and IEC 61000 series, railway EN 50121, and the aerospace RTCA DO-160 sections covering magnetic effects, power input, RF susceptibility and lightning effects. The environmental estate around the chambers is equally broad - altitude, drop, fungus and mould growth, humidity, high and low temperature, salt spray and corrosion, IP ingress, vibration, thermal cycling and thermal shock, run to MIL-STD, JSS 55555 and IEC standards - and the laboratory operates 24 hours a day, seven days a week, which customers cite as the reason they can compress a qualification programme. A reliability engineering and RAMS consultancy practice sits alongside the testing. Specialisations are defence and aerospace qualification, MIL-STD-461 and DO-160 programmes, automotive components, and combined EMC with environmental and reliability qualification.

Bharat Test House Pvt. Ltd. (BTH)

Website →

Bharat Test House runs its principal laboratory in the HSIIDC industrial estate at Rai in Sonipat, Haryana, with a Delhi office at Azadpur, and describes itself as the only privately owned independent testing laboratory in Delhi NCR and Haryana holding EMI/EMC accreditation. Its credentials are unusually layered for an Indian private laboratory: NABL accreditation to ISO/IEC 17025, FCC and Industry Canada recognition for North American market access, Bureau of Indian Standards recognition across several product categories including electric hair dryers, massagers, soldering irons and electronic switches and dimmers, CDSCO approval for medical device testing, and IECEE CB Testing Laboratory designation for solar photovoltaic modules under IEC 61215-2 and IEC 61730-2. EMC facilities comprise a 3 metre semi-anechoic chamber, a 10 metre open area test site and a shielded room for CE marking work, covering radiated and conducted emissions and susceptibility, immunity, electromagnetic shielding performance, electrostatic discharge, voltage dips and interruptions, adjacent signal selectivity, spurious emissions and power frequency magnetic field immunity against the CISPR 11 to 24 families, the IEC 61000-4 series and the EN 55011, 55014 and 55015 standards. The surrounding capability is what makes the site unusual: two C-type goniophotometers for LED and luminaire photometry, a 500 kW facility for testing UPS systems and solar inverters, India's first NABL-accredited solar simulator calibration laboratory, what the company claims is the country's largest domestic refrigerator testing capacity, Indian-language mobile handset testing, and AGMARK recognition for agricultural produce. Specialisations are solar photovoltaic and inverter testing, LED and luminaire photometry, white goods and appliances, EV batteries, and Indian regulatory certification across BIS, FCC and IC.

CPDMED TBI - EMI/EMC Pre-Compliance Facility, Indian Institute of Science

Website →

CPDMED TBI is the MedTech and Geriatric Healthcare Technology Business Incubator attached to the Department of Design and Manufacturing at the Indian Institute of Science in Bangalore, housed in the Raman Building on the IISc campus. Its EMI/EMC facility exists to serve a specific gap: Indian medical device start-ups and small manufacturers that need to know whether a prototype will pass before committing to an accredited campaign. The approach is unusually transparent - the incubator publishes a fixed per-test price list, with radiated emission measurement to IEC 61000-6-3 at five thousand rupees and conducted emission, electrostatic discharge to IEC 61000-4-2, surge to IEC 61000-4-5, electrical fast transient to IEC 61000-4-4 and voltage dip and short interruption to IEC 61000-4-11 at three thousand rupees each, which makes iterative development testing affordable in a way commercial day rates do not. Instrumentation is correspondingly focused rather than comprehensive: line impedance stabilisation networks, a spectrum analyser and transient suppression devices, sufficient for diagnostic and pre-compliance work but not for accredited certification. As a university incubator facility it holds no ISO/IEC 17025 accreditation and is recorded here without one; its value is access to IISc's design and manufacturing expertise alongside the measurement. The wider centre focuses on developing affordable healthcare technology. Specialisations are medical device pre-compliance measurement for start-ups, affordable healthcare technology development, and design-stage EMC diagnosis.

Calitron Calibration Laboratory (OPC) Pvt. Ltd.

Website →

Calitron Calibration Laboratory, with more than twenty-five years of operation from the PESH Industrial Premises in MIDC Bhosari, Pimpri-Chinchwad, holds two separate NABL accreditations - CC-3863 for calibration and TC-11024 for testing - which is the combination that lets it both measure a product and certify the instruments used to do so. Its EMC scope is deliberately narrow and deep rather than comprehensive, concentrating on transient immunity: electrical fast transient and burst testing across 0.25 to 4.4 kV with 5 nanosecond pulse front time and spike repetition to 1 MHz, surge testing with a combination wave generator from 0.25 to 4.1 kV and up to 2.05 kA, and electrostatic discharge immunity, all to the IEC 61000-4 series, with power quality analysis alongside. The distinguishing commercial feature is that the transient generators are available for daily rental as well as for in-house testing, so a manufacturer running repeated development iterations can take the equipment rather than booking chamber time - an offer almost no other laboratory in this directory makes. Video and status monitoring of the item under test is available during immunity runs, and the laboratory supports CE marking product approval. Because the EMC offering centres on conducted transients, radiated measurement is not part of the published scope. Specialisations are transient immunity testing and generator rental, instrument calibration, power quality analysis, and pre-compliance support for Pune-region manufacturers.

Compliance & Product Regulatory Approvals (C-PRAV)

Website →

C-PRAV is a global compliance partner with over 30 years of experience, providing end-to-end Standards, Regulations, Testing & Certification (SRTC) services. Their NATA (ILAC) accredited test lab is located at Unit A9, 2A Westall Road, Springvale, VIC 3171, Melbourne, Australia, offering EMC, Safety, Radio, RF Exposure, Cybersecurity, and Ingress Protection (IP) testing. C-PRAV has recently made headlines as the first Australian laboratory authorised by CSA Group for electrical safety testing for the North American (US/Canada) market. They have offices in Australia, New Zealand, India, Canada, Singapore, and France, and provide global market access services across 100+ countries.

Complus Systems Pvt. Ltd.

Website →

Complus Systems operates a compact but genuinely equipped EMC laboratory on the first floor of a building in the Rajajinagar Industrial Town in west Bengaluru, combining test services with a business supplying EMC test equipment and antenna measurement systems. The laboratory centres on a semi-anechoic chamber covering radiated measurement to 3 GHz, with radiated emission and immunity, conducted emission and the IEC 61000-4 immunity series run to published scope: electrostatic discharge to IEC 61000-4-2, electrical fast transient to 61000-4-4, surge to 61000-4-5, RF conducted immunity to 61000-4-6 and voltage dips and interruptions to 61000-4-11. Its conducted emission capability is specified more precisely than most - three-phase AC up to 32 amperes and DC from 300 volts up to 32 amperes - which matters for inverters, drives and DC-fed industrial equipment that exceed a single-phase LISN's rating. A distinctive secondary capability is calibration of conducted pulse generators for both commercial and automotive waveforms, work normally done only by equipment manufacturers, and the company's RF facilities are used for troubleshooting as well as formal measurement. Customers describe a well maintained IEC compliance laboratory with knowledgeable technical staff. No ISO/IEC 17025 or NABL accreditation is published, so it is recorded here without an accreditation entry and is best understood as a development, pre-compliance and equipment specialist. Specialisations are IEC 61000 immunity testing, three-phase and DC conducted emission measurement, antenna test systems, and conducted pulse generator calibration.

Conformity Testing Labs Private Limited

Website →

Conformity Testing Labs is a NABL-accredited and BIS-recognised independent laboratory running two units a few hundred metres apart in the Mayapuri Industrial Area of west New Delhi, one at WH-52 and one at A-33 in Phase I. The laboratory's published EMC programme is a complete ten-test European and Indian compliance suite rather than a partial offering: conducted and radiated emission to CISPR 15 and CISPR 32, harmonic current emission and voltage fluctuation and flicker to IEC 61000-3-2 and 61000-3-3, and immunity to electrostatic discharge, electrical fast transients and bursts, surge, power frequency magnetic fields, voltage dips and interruptions, and DC power port interruption to IEC 61000-4-29 - the last an often-omitted test that matters for DC-fed telecom and industrial equipment. Work is run to Indian IS standards alongside the CISPR and IEC originals, which is the combination a manufacturer needs for BIS certification and CE marking in one pass, and the laboratory serves residential, commercial, industrial and military product categories. Reviewers describe it as a fast and reliable route to BIS certification, and the wider business covers electrical and electronics safety testing and calibration alongside EMC. Operating six days a week, it functions as a general-purpose Delhi compliance house for electronics manufacturers and importers. Specialisations are BIS certification support, lighting and luminaire EMC to CISPR 15, telecom and IT product compliance, and combined EMC with electrical safety testing.

Cosmic Compliance Test Lab (CCTL)

Website →

Cosmic Compliance Test Lab is a NABL-accredited EMC house to ISO/IEC 17025:2017 with laboratories at Bommasandra on the southern industrial belt of Bengaluru and at the Annamalai Industrial Park in Kalapatti, Coimbatore. Although young - around five years of operation, with more than five hundred clients and a hundred and twenty projects reported - its chamber specification is serious: a component semi-anechoic chamber covering 10 kHz to 40 GHz and, separately, a vehicle semi-anechoic chamber with a two metre turntable, which puts whole electronic sub-assemblies and small vehicles inside a chamber rather than restricting the site to board-level work. Shielded control rooms support both, and an EMC scanner is in commissioning. The accredited programme spans CISPR 25 for automotive components, MIL-STD-461 including the RE102 radiated emission and bulk current injection methods, the IEC 61000 commercial and industrial series, and EN 50121 for railway equipment, with electrical fast transient and radiated emission and immunity across the range. The laboratory also holds a Designated Test Facility certificate. The 40 GHz ceiling paired with vehicle-level capability is an unusual combination at this scale in India, and customers single out developmental testing support, documentation help and cost relative to the larger international houses. Specialisations are automotive electronic sub-assembly EMC, aerospace and military MIL-STD-461 programmes, railway equipment, telecom and wireless products, and industrial, scientific and medical equipment.

Delhi Test House

Website →

Delhi Test House, operating from the Azadpur Industrial Area on GT Karnal Road in north Delhi, is among the oldest commercial testing laboratories in India, issuing test reports since 1975, and is NABL accredited, BIS recognised and ISO certified. Its EMC and EMI compliance facility sits inside an exceptionally wide multi-discipline operation rather than standing alone, and that breadth is the laboratory's defining characteristic: electrical products including cables, transformers, wiring accessories, meters and cells and batteries; domestic electrical appliances; electronics covering audio equipment, luminaires, components, IT equipment and power supplies; rubber and polymer products; fire extinguishers; toys and sports equipment; building materials with non-destructive testing; metals, alloys, ores and minerals; food, agricultural, AYUSH and pharmaceutical products; and water and pollution analysis. For a manufacturer whose product needs EMC evidence alongside materials, chemical or safety testing for BIS certification, that single-window scope is the practical draw. EMC work is run against the Indian IS standards adopted from the CISPR and IEC originals together with the IEC 61000 immunity series. Note that the EMC page cited in this directory no longer resolves on the laboratory's site, so the capability detail here is drawn from its contact and service listings and the published discipline list rather than from a dedicated EMC scope page, and the EMC scope may be narrower than the breadth of the wider laboratory suggests. Specialisations are BIS certification across many product families, electrical and cable testing, domestic appliances, and combined EMC with chemical and materials analysis.

EAMP Laboratories LLP

Website →

EAMP Laboratories is a NABL-accredited testing laboratory at Palghar, north of Mumbai in Maharashtra's Palghar district, whose established strength is lighting and photometry: it is described by customers as a well equipped laboratory for LED luminaires performing photometric parameter measurement, alongside electrical and home appliance testing, and has been expanding its scope to add further electrical tests. The EMI/EMC service sits within that expansion rather than being the laboratory's historical core, covering the emission and immunity suite that lighting and appliance products need for Indian BIS certification and CE marking - conducted and radiated emission to the CISPR 15 and CISPR 14 families, harmonic current and flicker, and the IEC 61000-4 immunity series including electrostatic discharge, electrical fast transient, surge, RF immunity and voltage dips. For a luminaire manufacturer that needs photometry, electrical safety and EMC evidence in one engagement, that combination is the practical draw, and reviewers consistently describe quick service and a helpful technical team.

ConsultancyEC International Certifications

Website →

EC International Certifications is a certification and compliance consultancy based at Rama Equator on Morwadi Road in Pimpri-Chinchwad, Pune, and it is important to be clear about its model: it does not own EMC chambers. Testing for electrical safety and EMI/EMC is routed to a NABL-accredited partner laboratory, while product certification work is carried out in association with a European certification and notified body, so the firm's role is to design the compliance route and manage it end to end rather than to make the measurements itself. Its staff include IRCA-registered auditors, and the management system side covers ISO 9001, ISO 14001, ISO 45001, ISO 22000, ISO 13485 for medical devices, ISO 27001, HACCP and the AS/EN 9100 aerospace standard. On the product side it handles CE marking under the Medical Device, Machinery, Pressure Equipment, Low Voltage, EMC and Construction Products regimes, plus RoHS, FDA liaison and 510(k) submissions - which makes it a route for Indian manufacturers aiming at European and United States market access rather than domestic BIS work alone. No accreditation of its own is published, consistent with a consultancy, and it is recorded here without an accreditation entry. Specialisations are CE marking across multiple EU directives, ISO management system certification, medical device regulatory routes including 510(k), and managed EMC and safety test programmes.

EMC Testing and Compliance LLP

Website →

EMC Testing and Compliance LLP, founded in 2016 at Pace City I in Sector 37, Gurugram, is a multi-discipline Indian testing, inspection, certification and training house accredited to ISO/IEC 17025:2017, recognised by the Bureau of Indian Standards and designated by the Telecommunication Engineering Centre (TEC) - the designation required for Indian telecom equipment approval under the mandatory testing and certification regime. Its practical centre of gravity has become energy efficiency as much as electromagnetic compatibility: the laboratory is heavily used for Bureau of Energy Efficiency star rating testing, notably on BLDC ceiling fans since star rating became mandatory, with customers describing years of consistent turnaround on sixty or more fan models. Around that sit BIS and ISI testing, CE certification, RoHS and ELV substance compliance, REACH, environmental testing, TEC telecom testing and - unusually for an EMC-named laboratory - leather and footwear testing, reflecting a client base spanning leather and footwear, automotive, toys, home appliances, chemicals, electrical and electronics and hard goods. EMC work is run to the IEC, IS and EN families. For a manufacturer needing BIS certification, BEE star rating and EMC evidence from one supplier, the combination is efficient, and reviewers consistently cite accurate results and regulatory guidance as the reason for long-term relationships. Specialisations are BEE energy efficiency star rating, BIS and ISI certification, TEC telecom approval, home appliances and ceiling fans, and leather and footwear testing.

ConsultancyEMC-RF Technology Solutions

Website →

EMC-RF Technology Solutions is an EMI/EMC and radio-frequency engineering practice in Vignan Nagar, east Bengaluru, founded and led by Dr. Lakkoju Narasimha Acharyulu, with a contact point in the United States. Its work is engineering-led rather than certification-led: the practice covers EMI and EMC design and analysis, RF and antenna design, signal integrity analysis, printed circuit board design, development of microwave components, and testing and validation against the FCC, EN, CISPR, ETSI and MIL-STD families - which means a customer typically arrives with a hardware problem to solve or a design to review rather than a product to certify. The breadth across design disciplines is the distinguishing feature; where most consultancies address either the layout or the chamber result, this one spans antenna design, board-level signal integrity and the regulatory limit in the same engagement, which suits programmes where the EMC failure and the RF performance problem share a root cause. The customer base spans medical, aerospace, automotive, defence, power and wireless sectors. No ISO/IEC 17025 or NABL accreditation is published and no owned chambers are described, so the practice is recorded here without an accreditation entry and is best understood as an EMC and RF engineering consultancy with validation capability rather than an accredited test house. Specialisations are EMI/EMC design and root-cause analysis, antenna and RF front-end design, signal integrity and PCB design review, and microwave component development.

EMI Solutions Pvt Ltd (EMIS)

Website →

EMI Solutions, trading internationally as EMIS, is an Indian manufacturer of EMI and EMC filters, feedthrough components, power quality products and surge protectors based in the Bommasandra Industrial Area on Hosur Road south of Bengaluru, and it runs an accredited EMI test facility alongside its design and production operations. That combination is the point of the business: when a customer's equipment fails an emission limit, the same organisation measures the problem and designs the filter that fixes it, and the laboratory is used for both in-house product qualification and external customer testing, in the laboratory or on site. Measurement spans 50 Hz to 40 GHz, covering conducted emission and conducted immunity, open-site radiated emission measurement, and military specification testing on single-phase filters rated up to 50 amperes. The company reports a commercial footprint across fourteen countries on three continents - India, Israel, Malaysia, Singapore, Thailand and Vietnam in Asia, France, Germany, Italy, the Netherlands, Sweden, Spain, Switzerland and the United Kingdom in Europe, and the United States - and names TE Connectivity, ABB, Enphase, Philips, Larsen & Toubro, Tata, Bharat Electronics, BHEL, Kone, Siemens and Godrej among its customers. Alongside testing it offers EMI design consulting and power quality and energy audits. Note that it describes its facility as accredited but publishes no NABL or ISO/IEC 17025 registration number, so it is recorded here without a formal accreditation entry; confirm the accredited scope before relying on it for certification. Specialisations are EMI and EMC filter design and manufacture, military-grade filters, power quality products, conducted emission and immunity measurement, and filter-level remediation engineering.

EMI/EMC and Electrical Safety Test Facility, IIT Kanpur

Website →

The EMI/EMC and Electrical Safety Test Facility at the Indian Institute of Technology Kanpur was established in 2019 with major funding from BIRAC, the Biotechnology Industry Research Assistance Council, and occupies rooms 201H and 202H of the Diamond Jubilee Academic Complex on the IIT Kanpur campus. It is NABL accredited and is coordinated by Prof. M. Jaleel Akhtar, a Fellow of the IEEE, the Indian National Academy of Engineering and IETE with more than twenty years in the field, with Prof. A. R. Harish as alternate coordinator. The facility is built around a 3 metre semi-anechoic chamber with dedicated control and amplifier rooms and a fully automated EMC measurement system, plus a modern electrical safety analyser - so a medical device can be taken through both the IEC 60601-1-2 electromagnetic compatibility requirements and the IEC 60601-1 electrical safety requirements in one visit, which is the specific gap the facility was funded to close. Accredited and published standards cover IEC 60601-1-2 and IEC 60601-1 for medical equipment, IEC 61010-1 for measurement and laboratory equipment, IEC 61000-4-3 radio frequency immunity, and the CISPR 11, 14, 15, 32 and 35 emission and immunity families for industrial, household, lighting and multimedia products. Its stated mission is affordable testing for Indian medical device developers, addressing a widespread lack of EMC compliance awareness among medical professionals and start-ups, and it serves electronics manufacturers, the automotive sector and small-scale industry alongside medical devices. Specialisations are medical device EMC and electrical safety, affordable testing for start-ups and small manufacturers, and academic research-backed EMC investigation.

ERDA - Electrical Research and Development Association

Website →

The Electrical Research and Development Association is a co-operative industry research body at Makarpura GIDC in Vadodara, Gujarat - the road it stands on is named after it - and its EMI/EMC laboratory is among the better-equipped independent facilities in western India, accredited to ISO/IEC 17025:2017 by NABL. Its anchor facility is a 10 metre semi-anechoic chamber with a 5 metre diameter turntable rated to three metric tonnes and radiated immunity field generation to 60 V/m, which accommodates switchgear assemblies, motors, large UPS and SMPS systems and electric vehicle chargers rather than only bench-scale equipment. Instrumentation is correspondingly serious: EMI test receivers covering 20 Hz to 26.5 GHz, an artificial mains network rated to 100 amperes over 9 kHz to 30 MHz - a rating few Indian laboratories match and the one that makes high-current industrial equipment testable - signal generators and power amplifiers spanning 9 kHz to 22 GHz, and an isotropic electric field probe reading to 800 V/m across 10 kHz to 40 GHz. Two designations distinguish it: approval by Integrated Headquarters, Ministry of Defence (Indian Navy), which opens naval programmes, and TEC accreditation for telecom equipment evaluation. The accredited programme runs MIL-STD-461 revisions E and F for radiated and conducted emission and susceptibility alongside the commercial radio interference, ESD, RF immunity and harmonic measurement standards. Published work spans energy meters, switchgear, motors, rocket launcher assemblies, UPS and SMPS equipment and EV chargers. Specialisations are high-current industrial and switchgear EMC, naval and defence equipment, telecom equipment evaluation, energy metering, and electric vehicle charging infrastructure.

ConsultancyEVTL India (Emphatic Vans and Testing Labs Pvt. Ltd.)

Website →

EVTL India, formally Emphatic Vans and Testing Labs Pvt. Ltd., operates from Sector 63 in Noida with a registered office at Laxmi Nagar in Delhi, and its practical business is regulatory certification consultancy rather than chamber operation. Customer accounts consistently describe it as a BIS consultant: managing documentation, guiding manufacturers through Bureau of Indian Standards audits, coordinating the licence process and handling the interface with auditors from start to finish. On the EMI and EMC side it provides regulatory guidance, pre-compliance testing and end-to-end certification support against the standards its clients need - FCC Part 15, MIL-STD-461 and MIL-STD-464, the ISO, IEC and CISPR families, and IEC 60601-1-2 for medical devices - covering both emissions and immunity, conducted and radiated. The company is ISO certified, MSME registered and a FICCI member, and carries Great Place to Work, Clutch and UpCity recognitions, but publishes no NABL or ISO/IEC 17025 accreditation and does not describe owned chambers, so it is recorded here without an accreditation entry and is best understood as a compliance consultancy that arranges and manages testing rather than performing accredited measurement itself. Its customer base spans medical devices, consumer electronics, aerospace, military systems, telecommunications and healthcare. Specialisations are BIS certification and audit management, Indian regulatory market access, pre-compliance EMC coordination, and end-to-end certification programme management.

GARC - Global Automotive Research Centre, EMC Facility

Website →

The Global Automotive Research Centre at Oragadam in the SIPCOT Industrial Growth Centre near Chennai is a Government of India automotive test and homologation centre established under the NATRiP programme, and its electromagnetic compatibility facility is the largest vehicle-level EMC installation in this directory. Two absorber-lined semi-anechoic enclosures dominate it: one measuring 30 by 20 by 10 metres with an 11 metre diameter turntable, the other 19.5 by 12 by 8 metres with a 6 metre turntable, both integrated with four-wheel-drive chassis dynamometers so a vehicle can be run under load inside the chamber. Vehicle-level radiated emission measurement covers 30 MHz to 18 GHz off-board and 1.8 MHz to 2 GHz on-board, and radiated immunity runs from 100 kHz to 18 GHz at field strengths up to 200 V/m - across two-wheelers, three-wheelers, passenger cars and light and heavy commercial vehicles, to AIS 004 Part 3, CISPR 12, CISPR 25 and ECE R10. Component-level capability is equally complete: ALSE chambers plus TEM cell, stripline and tri-plate methods, bulk current injection from 1 MHz to 3 GHz with current probes to 300 mA and a tubular wave coupler above 400 MHz, conducted emission by voltage and current probe methods, conducted transient immunity on 12, 24 and 48 volt systems to 100 amperes generating the full ISO 7637 pulse set, ESD to 30 kV air and contact per ISO 10605, and ISO 16750-2 power supply tests. Commercial equipment testing covers harmonics and flicker to 75 amperes, EFT to 4 kV and surge to 6 kV. Altair FEKO simulation supports antenna placement design. Two further component ALSE chambers and an EV charging test environment rated to 720 kW and 1000 A DC are in commissioning. Specialisations are vehicle-level EMC and homologation, electric vehicle and EVSE testing, electronic sub-assembly qualification, and automotive OEM specification programmes.

HLL Lifecare Limited - EMC/EMI Testing Laboratory

Website →

HLL Lifecare Limited is a Government of India enterprise with its registered office at Poojappura in Thiruvananthapuram, Kerala, and it operates a dedicated EMC/EMI testing laboratory in Sector 62, Noida aimed squarely at the Indian medical device sector. The laboratory is accredited to ISO/IEC 17025:2017 by NABL under accreditation number TC-11078 and holds CDSCO registration TL/MD/2023/000002 - the combination that allows its reports to support medical device registration under India's Medical Device Rules 2017, which is the specific reason manufacturers come to it. The facility is built around a 3 metre semi-anechoic chamber for radiated measurement together with instrumentation for what it describes as all eleven basic tests: radiated and conducted emission to CISPR 11, electrostatic discharge immunity to IEC 61000-4-2, radiated immunity to 61000-4-3, conducted immunity to 61000-4-6, surge to 61000-4-5, electrical fast transient and burst to 61000-4-4, voltage dips and interruptions to 61000-4-11, power frequency magnetic field immunity to 61000-4-8, harmonic emission to 61000-3-2 and flicker emission to 61000-3-3 - which is precisely the test set IEC 60601-1-2 calls up for medical electrical equipment. That focused completeness rather than breadth is the laboratory's character: it does one standard thoroughly rather than many partially. Specialisations are medical electrical equipment EMC to IEC 60601-1-2, CDSCO medical device registration support, and Indian Medical Device Rules compliance.

House of Testing

Website →

House of Testing is a NABL-accredited and BIS-recognised independent testing laboratory in Sector 5, Noida, serving the Delhi NCR manufacturing and importing base. Customer accounts describe a well organised laboratory with notably fast turnaround, singling out battery testing to Bureau of Indian Standards requirements as an area where it delivers faster than expected - a useful signal given how much Indian compliance work now centres on cells, battery packs and chargers. Its EMI and EMC service covers the emission and immunity suite that BIS certification and CE marking call for: conducted and radiated emission to the CISPR 11, 14, 15 and 32 families as adopted into the Indian IS standards, harmonic current and flicker emission, and the IEC 61000-4 immunity series including electrostatic discharge, electrical fast transient, surge, radiated and conducted RF immunity, power frequency magnetic field and voltage dips and interruptions. Testing sits alongside electrical safety and battery work rather than standing alone, which suits a manufacturer closing out several BIS product standards at once. Note that the laboratory's own website could not be retrieved during research - houseoftesting.com refused automated access - so the capability detail here is drawn from verified business listings and customer accounts rather than from its own published scope, and the accredited EMC scope should be confirmed before booking. Specialisations are BIS certification support, cell and battery testing, electrical safety, and fast-turnaround compliance testing for Delhi NCR manufacturers.

IDEMI - Institute for Design of Electrical Measuring Instruments

Website →

IDEMI, the Institute for Design of Electrical Measuring Instruments, is a Government of India society operating as an MSME Technology Centre under the Ministry of Micro, Small and Medium Enterprises, located on Swatantryaveer Tatya Tope Marg beside the Eastern Express Highway at Sion in Mumbai. It is NABL accredited to ISO/IEC 17025:2017 under certificate CC-2287, ISO 9001:2015 certified and - unusually for an MSME institute - holds AS9100 Rev D aerospace accreditation. Its EMC laboratory sits inside a broad technology centre whose remit is to give small manufacturers access to facilities they could not justify alone, and the published EMC scope reflects that practical bent: immunity testing covering electrostatic discharge to 30 kV, electrical fast transient and burst from 0 to 4 kV, surge immunity from 0 to 7 kV, conducted RF susceptibility, magnetic field tests and voltage dips and variations to the IEC and EN 61000 series; and emission testing covering conducted emission from 150 kHz to 30 MHz, harmonic emission to the fortieth harmonic and flicker measurement. Product-specific work runs to the IEC and EN 61000-6 generic standards, IEC 61326-1 for measurement and control equipment, IEC 60601-1-2 for medical devices and the CISPR families. Around the EMC laboratory sit tool room services including precision machining, prototyping and 3D printing, a wide calibration operation spanning electro-technical, thermal, pressure, dimensional and fluid flow disciplines, safety, environmental, LED and pump testing, seismic and bump test facilities, and a substantial training programme. Specialisations are EMC for electrical measuring and control instruments, MSME manufacturer access to shared facilities, aerospace-accredited testing, calibration, and medical device EMC.

ITC India Pvt Ltd (Institute of Testing & Certification India)

Website →

ITC India, the Institute of Testing and Certification India, is a NABL-accredited laboratory in the JLPL Industrial Area at Sector 82, Mohali in Punjab, built primarily around electrical safety with electromagnetic compatibility as one of several supporting disciplines. Its EMC scope covers the generic immunity and emission standards IEC 61000-6-1 and 61000-6-3 together with CISPR 11:2019 for industrial, scientific and medical equipment and CISPR 15:2018 for lighting products, and the ETSI EN 301 489 series for radio equipment EMC. That sits alongside an unusually wide complementary set for a laboratory of this size: electrical safety testing of household appliances and industrial equipment, ingress protection testing across the full IP41 to IP69K range, medical device testing to the IEC 60601 series, environmental testing covering vibration, thermal and humidity conditioning, photometry to the LM-79 and LM-80 methods for LED products, and calibration of temperature, pressure and humidity sensors. For a manufacturer of luminaires, appliances or medical equipment, the appeal is closing out EMC, safety, IP rating and photometry in one engagement rather than across four suppliers, and the laboratory also covers the current IEC 62368-1:2023 edition for audio-video and IT equipment. Customers describe a knowledgeable team and good service quality. Industries served span household appliances, medical and electromedical equipment, lighting, information technology, automotive components, industrial machinery and solar photovoltaic products. Specialisations are electrical safety testing, LED and luminaire photometry, ingress protection rating, medical device testing, and combined EMC with safety and environmental qualification.

Karandikar Laboratories Pvt. Ltd. (KLPL)

Website →

Karandikar Laboratories, with around two decades of operation, is a NABL-accredited laboratory at Betegaon near Boisar in Palghar district, Maharashtra, and its defining specialism is explosion protection rather than electromagnetic compatibility alone. The laboratory tests Ex equipment across the protection concepts - flameproof enclosures (Exd), intrinsic safety (Exia), non-sparking (Exn) and increased safety (Exe) - and is an IECEx Training Hub, handling certification routes through IECEx, ATEX, the Indian Petroleum and Explosives Safety Organisation (PESO), BIS and the Directorate General of Mines Safety (DGMS) as well as country-specific approvals. That makes it the only facility in this directory combining hazardous-area certification with EMC work, and the reason customers in oil and gas, mining, chemicals and process industries use it: a flameproof instrument needs Ex certification, enclosure and environmental qualification and EMC evidence, and all three can be closed out at one address. EMC testing is run against the European directives its clients mark to - the EMC Directive, the Low Voltage Directive and the Machinery Directive - with the emission and immunity suite drawn from the CISPR and IEC 61000 families. The laboratory also performs electrical installation inspection in hazardous areas, Ex equipment inspection, and training on area classification and protection techniques, alongside enclosure, environmental and calibration work. Specialisations are explosion-protected (Ex) equipment testing and certification, hazardous-area installation inspection, IECEx and ATEX routes, PESO and DGMS approval, and combined Ex with EMC and environmental qualification.

LAHARI - Advanced Electronics Test Facility, Mysore ESDM Cluster

Website →

LAHARI is the Advanced Electronics Test Facility of the Mysore ESDM Cluster, established in the Hebbal Industrial Area at Mysuru with support from the Government of India and the Government of Karnataka, and operated in partnership with the Norwegian certification group Nemko - a pairing that gives a regional cluster facility access to international certification routes. Its anchor asset is a 10 metre semi-anechoic chamber, described by visitors as the largest in the region and among the more affordable EMC chambers in Karnataka, supported by environmental and mechanical test facilities including temperature shock, shock and vibration. The published EMC programme is unusually broad for a cluster facility, spanning radiated and conducted emissions and susceptibility, electrical fast transient, electrostatic discharge, surge, harmonic emission, voltage fluctuation and flicker, power frequency and pulsed magnetic field immunity, AC and DC voltage dip and interruption, and power disturbance testing - run against CISPR 32 and CISPR 35 for multimedia, CISPR 11, 12, 14 and 25 for industrial, vehicle and household products, the ISO 11452 and ISO 10605 automotive families, the IEC 61000 series, IEC 60601-1-2 for medical equipment, FCC Part 15B, the Indian AIS automotive standards, MIL-STD-461G and RTCA DO-160. Covering commercial, automotive, medical, military and aerospace standard families in one facility is rare at this scale, and the inclusion of pulsed magnetic field immunity is a test many general-purpose laboratories omit. Specialisations are IT and audio-video products, automotive electronics, household appliances, laboratory test and measurement equipment, medical and healthcare equipment, and military and aerospace hardware.

Marquistech

Website →

Marquistech is a globally operating ISO 17025:2017-accredited testing organization headquartered in Mumbai, India, with a US office in Austin, Texas and additional offices across Europe, Asia, and the Americas. Founded in 2005, the company serves over 27 OEMs/ODMs, chipset manufacturers, and telecom operators worldwide, with deep expertise in mobile device testing, 5G, automotive, and IoT. The EMI/EMC testing facility is a newly launched capability offering both pre-compliance and full compliance testing. EMC testing covers emissions to CISPR 11 (ISM equipment), CISPR 32 (multimedia equipment), and CISPR 15 (lighting equipment), along with the full IEC/EN 61000-4 immunity series including ESD (IEC 61000-4-2), radiated RF immunity (IEC 61000-4-3), EFT/burst (IEC 61000-4-4), surge (IEC 61000-4-5), conducted RF immunity (IEC 61000-4-6), voltage dips and interruptions (IEC 61000-4-11), and DC input immunity (IEC 61000-4-29).

MiCOM Labs

Website →

MiCOM Labs is a privately owned, A2LA-accredited testing and certification laboratory headquartered in Pleasanton, California. Founded in 2001 by Gordon Hurst, the company specializes in RF, EMC/EMI, 5G/cellular testing, antenna characterization, and global product certification. MiCOM Labs also has offices in Shenzhen, China and Bengaluru, India. On the EMC/EMI side, MiCOM Labs is accredited to test for North American, European, Asian, and other international markets. Their test infrastructure includes anechoic radiated chambers and capabilities spanning emissions and immunity testing — covering ESD, EFT, surge, conducted and radiated immunity, voltage dips and interruptions, harmonics and flicker, and power magnetic fields. Their EMC engineers also provide troubleshooting and debugging services, assisting with product design, pre-testing, and root cause analysis for non-compliance issues. Beyond EMC, MiCOM Labs has strong RF and wireless testing capabilities, including 5G and cellular testing and antenna characterization. The lab operates as an FCC-recognized Telecommunications Certification Body (TCB), enabling them to issue certifications directly rather than routing through the FCC. Their certification services extend to global market access, helping manufacturers obtain type approvals for international markets through their MiPassport regulatory intelligence platform. They also offer MiCybercert for cybersecurity compliance certification of connected devices, and MiCMS, a compliance collaboration system for managing certification data and workflows. MiCOM Labs positions itself with an "inch wide, mile deep" philosophy — focused specifically on wireless, EMC, and product certification rather than spreading across a broad range of testing disciplines.

NexorTest Technologies Pvt Ltd

Website →

NexorTest Technologies is an EMC testing and compliance services provider based at Nagarbhavi in west Bengaluru, on the Outer Ring Road service road near Malagala. It operates in the Bengaluru electronics cluster alongside the city's larger established laboratories, offering electromagnetic compatibility testing and compliance support across the European and international standard families that Indian manufacturers and exporters work to - conducted and radiated emission measurement, the IEC 61000-4 immunity series covering electrostatic discharge, electrical fast transient, surge, conducted and radiated RF immunity and voltage dips, and harmonic current and flicker emission - with pre-compliance measurement and regulatory guidance alongside. It is important to flag the limits of what could be verified here: the company's own website refused automated retrieval during research, so the detail in this entry is drawn from verified business records and directory listings rather than from NexorTest's published pages. Its accredited status, chamber specification and the precise extent of its test scope could not be confirmed, and it is consequently recorded without an accreditation entry and with a conservative test list; it may hold accreditation and offer a considerably wider scope than shown. Contact the laboratory directly to establish its current capability and accreditation before relying on this entry. Specialisations are EMC testing and compliance services for the Bengaluru electronics manufacturing base, pre-compliance measurement, and regulatory support.

Planet Electro Labs

Website →

Planet Electro Labs is an ISO/IEC 17025 accredited test laboratory near Ramesh Nagar metro station in west New Delhi, operating as both an EMC test house and a supplier of EMC test equipment - a combination that gives it unusually direct familiarity with the instrumentation it runs. Its published immunity scope is the practical core of the business: electrostatic discharge, electrical fast transient and burst, surge immunity, voltage dips and interruptions including the IEC 61000-4-29 DC power port test, and magnetic field immunity. The emission and immunity standards it works to span the CISPR product families - CISPR 12 and 14-1 and 14-2 for vehicles and household appliances, CISPR 15 for lighting and CISPR 32 for multimedia - together with the IEC and EN 61000 series and the EN 55014 appliance standards, and it also tests to MIL-STD-461 for defence equipment, which is a wider reach than its size suggests. Note that the laboratory's own website refused automated retrieval during research, so the capability detail here is drawn from its directory listing and verified business records rather than its own service pages; its NABL registration number and the full accredited scope should be confirmed directly. Industries served span industrial equipment, laboratory instrumentation, medical devices, railway and telecommunications products. Specialisations are transient and surge immunity testing, appliance and lighting product EMC, laboratory and medical instrumentation, and EMC test equipment supply.

Pride Testing Services Pvt Ltd (Pride Testing Lab)

Website →

Pride Testing Services operates its own EMC laboratory at the NX-One complex in Tech Zone IV, Greater Noida West, serving the Delhi NCR electronics manufacturing base. It is an ISO/IEC 17025 accredited facility issuing NABL-accredited reports, built around semi-anechoic chamber facilities for radiated emission measurement. The published test programme is the complete European and Indian compliance suite rather than a partial offering: on the emission side radiated and conducted emission, harmonic current and flicker measurement; on the immunity side electrostatic discharge, radiated and conducted RF immunity, electrical fast transient and burst, surge and voltage dips and interruptions, run against the IEC 61000-4 series, the CISPR families, EN standards, FCC requirements and MIL-STD-461 for defence equipment. Alongside accredited testing the laboratory offers pre-compliance measurement, product-specific test planning and technical documentation and reporting, which suits manufacturers iterating a design rather than only closing one out. Its customer base spans consumer electronics, IT and multimedia equipment, telecom and wireless products, industrial equipment, medical devices, automotive and transportation electronics and smart and IoT devices. Confirm the current accredited scope before booking, as the laboratory presents its accreditation in general terms rather than publishing a scope document. Specialisations are multi-sector CE and BIS compliance testing, IoT and smart device EMC, pre-compliance measurement with test planning, and Delhi NCR regional service.

Rishabh Testing and Calibration Laboratory (Rishabh Instruments Ltd)

Website →

Rishabh Instruments is a long-established Indian manufacturer of electrical measuring instruments, current transformers and multimeters based in the MIDC Satpur industrial area at Nashik, Maharashtra, and it opened its testing and calibration laboratory to external customers in 2017, drawing on more than three decades of in-house testing experience. The laboratory holds NABL accreditation across both its testing and calibration divisions and operates to ISO/IEC 17025:2017, with EMI and EMC measurement sitting alongside type testing, environmental testing, life cycle testing, mechanical testing and electro-technical calibration - the combination a manufacturer of instruments, meters or panel equipment needs to qualify a product completely in one place. Measurement is automated and software-controlled on current-generation instrumentation, and the laboratory offers both pre-compliance and full compliance testing, so a design can be iterated and then certified without changing supplier. Its position inside a manufacturer gives it practical depth in instrument transformers, energy meters, measuring and control equipment and panel products, which is where most of its external caseload sits; named customers include Tata, Godrej, Siemens, Emerson and Capgemini alongside automotive and electronics manufacturers. Specialisations are electrical measuring instruments and meters, instrument transformers, panel and control equipment, combined EMC with environmental and life cycle qualification, and accredited electro-technical calibration.

Spark Minda Technical Centre (SMIT) - EMC Laboratory

Website →

The Spark Minda Technical Centre, known as SMIT, is Minda Corporation's central engineering hub in the Rajiv Gandhi Infotech Park at Hinjawadi, Pune, consolidating the group's automotive electronics design, prototyping and test activity under one roof - and its NABL-accredited EMC laboratory is explicitly open to external customers, group and non-group alike, rather than serving only Minda's own products. The facility is purpose-built for automotive electronic sub-assemblies: a 1 metre semi-anechoic chamber for radiated emission and immunity measurement, an absorber-lined shielded enclosure with better than 90 dB shielding effectiveness, and separate shielded rooms for bulk current injection, conducted emission and electrostatic discharge work, alongside climatic chambers. Two details reflect a laboratory designed by people who run tests rather than specify them: high-definition cameras overlay live test parameters onto the video of the item under test, and optical transceivers carry communication into the chamber without compromising shielding - both solving the practical problem of monitoring an ESA's function during an immunity run. More than thirty-four EMC test types are offered, covering radiated emission and immunity, conducted emission, ESD, transient immunity, power supply variation, thermal testing, dielectric strength and insulation resistance, measured against ISO, CISPR, ECE R10, the Indian AIS standards, JASO and vehicle manufacturer specifications, on fully automated measurement systems. Specialisations are automotive electronic sub-assembly EMC, OEM specification programmes, combined EMC with climatic and electrical qualification, and interference diagnosis to avoid costly redesign.

Sunren Technical Solutions Private Limited

Website →

Sunren Technical Solutions operates a test laboratory in the TTC Industrial Area at Pawne in Navi Mumbai, with a head office at Chunabhatti in Sion, Mumbai, and its defining credential is designation by the Telecommunication Engineering Centre - customers describe it as one of the more experienced TEC-approved laboratories in India, which is the designation required for telecom equipment approval under India's Mandatory Testing and Certification of Telecom Equipment regime. That makes it a practical route for telecom and networking equipment vendors who need an MTCTE certificate rather than only a CE or BIS mark. The laboratory's EMC programme covers the emission and immunity suite that TEC and BIS schemes call up: conducted and radiated emission to the CISPR 32 and CISPR 11 families, harmonic current and flicker measurement, and the IEC 61000-4 immunity series including electrostatic discharge, radiated and conducted RF immunity, electrical fast transient, surge, power frequency magnetic field and voltage dips and interruptions. Note that the company's own website refused automated retrieval during research, so the capability detail here is drawn from verified business records and customer accounts rather than its own service pages; its NABL registration and the precise accredited and TEC scope should be confirmed directly, and the test list here is deliberately conservative. Customers consistently cite fast turnaround and close coordination through the approval process. Specialisations are TEC MTCTE telecom equipment approval, networking and IT equipment compliance, and Mumbai-region regulatory testing support.

TUV Rheinland India Pvt Ltd

Website →

TUV Rheinland India runs EMI and EMC test facilities at Bengaluru, Pune and Visakhapatnam, with further offices at Gurgaon, and the Visakhapatnam laboratory is the group's standout Indian asset. Opened in October 2020 inside the Andhra Pradesh MedTech Zone (AMTZ), it is accredited both by NABL to ISO/IEC 17025:2017 and by the American Association for Laboratory Accreditation (A2LA), and TUV Rheinland describes it as the only internationally certified facility in India accredited to 40 GHz - a ceiling that matters for radar, millimetre-wave and modern wireless hardware that lower-frequency Indian labs cannot close out. It houses both a 10 metre and a 3 metre anechoic chamber, the semi-anechoic chamber being the largest of its type anywhere in the TUV Rheinland network, and adds combined shock and vibration plus thermal shock chambers so EMC and environmental validation run on one site; its position within a medical technology park shapes a caseload weighted toward medical and in-vitro diagnostic equipment. The Bengaluru laboratory at Electronic City Phase 1 and the NABL-accredited MECF laboratory at Pune carry the industrial, automotive and appliance work, including bulk current injection, three-phase voltage dips and interruptions, click and discontinuous disturbance analysis, and on-site measurement. Across the Indian network TUV Rheinland is a Notified Body under the EMC Directive 2014/30/EU and an FCC-listed laboratory, and accredited standards span the CISPR 11, 12, 14, 25, 32 and 35 families, the IEC 61000-3 and 61000-4 series, the ISO 11452 and ISO 7637 automotive families, MIL-STD-461, and the Indian IS, AIS and SAE sets. Specialisations are medical devices and IVD equipment, automotive and e-mobility components, railway technology, lighting and household goods, and high-frequency work to 40 GHz.

Thiagarajar Telekom Solutions Ltd (TTSL)

Website →

Thiagarajar Telekom Solutions is an RF and microwave engineering company at the Thiagarajar Advanced Research Centre in Thiruparankundram near Madurai, Tamil Nadu, incubated out of the TIFAC-CORE centre at Thiagarajar College of Engineering and carrying what it describes as twenty-five years of accumulated research and development experience in RF and microwaves. Its test offering follows from that engineering base rather than from a compliance-house model: antenna testing, RF testing, EMI and EMC testing and electromagnetic field (EMF) measurement, supported by design capability in antennas, RF components and systems, and transmitter and receiver architectures. The combination of antenna characterisation alongside EMC measurement is relatively rare in India and useful where a radio product's emission problem and its antenna performance share a root cause - the company works on both sides of that boundary. Alongside testing it provides antenna and RF design consultancy and runs customised training programmes in antennas, RF and baseband processing, reflecting its academic origins. The company publishes no NABL or ISO/IEC 17025 accreditation and does not detail its chamber specification, so it is recorded here without an accreditation entry and with a conservative test list; it is best understood as an RF and EMC engineering and measurement house rather than an accredited certification laboratory, and its current scope should be confirmed directly. Specialisations are antenna design and measurement, RF and microwave system design, EMF exposure measurement, and RF engineering training.

URS Products and Testing (URS Labs)

Website →

URS Products and Testing, trading as URS Labs, is a NABL-accredited multi-site Indian laboratory running two units in Sector 5, Noida and two more near Pune - at Mahalunge Khed and in MIDC Phase II at Varale - which puts it within reach of both the Delhi NCR and western automotive supply bases. Its EMC programme is notably complete across both the commercial and automotive standard families: conducted and radiated emission, conducted susceptibility, electrostatic discharge, electrical fast transient, current harmonics, transient immunity, voltage variations and surge testing, run against the IEC 61000 series, CISPR 11, 14-1, 14-2, 25, 32 and 35, the European railway and road traffic system standards, and the ISO 11452, ISO 10605 and ISO 7637-2 automotive families. The Noida site combines EMI/EMC testing on the ground floor with shock and vibration facilities and further testing across several floors, so a component can be taken through electromagnetic and mechanical qualification in one visit. The customer base is unusually wide - automotive, telecommunications, IT and audio-visual, multimedia, lighting, household appliances, machinery, railway equipment, battery management systems, medical devices, electric vehicle chargers and road traffic systems - with CE certification support for European market access alongside Indian BIS work. Customer feedback on service quality is mixed, with several reports of poor communication and handling after testing alongside positive accounts of the facility itself, so it is worth establishing expectations in writing. Specialisations are automotive component EMC, battery management systems and EV chargers, railway and road traffic equipment, and combined EMC with shock and vibration testing.

Vincular Testing Labs India Private Limited

Website →

Vincular Testing Labs India operates from the Surya Building in HSR Layout, Bengaluru, and its role in the compliance chain is guidance and certification management rather than chamber operation on the service covered here. For BIS ISI Mark certification it provides end-to-end licensing support for domestic and foreign manufacturers - Quality Control Order compliance, application preparation, coordination of the required testing through BIS-accredited laboratories, and management of the licence process through to grant - with parallel practices in BIS CRS registration, the newer Scheme X conformity assessment route and Legal Metrology compliance. That makes it a route for manufacturers facing India's expanding mandatory certification regime rather than a destination for EMC measurement itself, and the ISI service described here routes testing to third-party accredited laboratories rather than performing it in-house. The product categories it covers reflect where Quality Control Orders bite: electrical appliances, toys and consumer products, safety glass, LPG valves, tyres and tubes, and Portland cement. No NABL or ISO/IEC 17025 accreditation is published for this service and no owned chambers are described, so it is recorded here without an accreditation entry; note that the company's registered name includes Testing Labs and it may hold laboratory capability beyond the certification service documented here, which is worth confirming directly. Specialisations are BIS ISI Mark and CRS certification, Scheme X conformity assessment, Quality Control Order compliance, Legal Metrology, and foreign manufacturer licensing.

ConsultancyVougavent Technologies

Website →

Vougavent Technologies is an EMI/EMC consulting practice in BTM Layout, Bengaluru, that runs its own in-house measurement facility for pre-compliance and diagnostic work rather than accredited certification. Its defining tool is near-field scanning: by mapping emissions directly above a board the practice localises a radiating structure to a specific track, component or connector, which is what allows it to claim resolution of more than a hundred EMC failures and the rapid turnaround it advertises. Measurement capability covers radiated emission, radiated susceptibility, electrostatic discharge, and surge and fast transient testing, applied against MIL-STD-461 for defence equipment, RTCA DO-160 for aeronautical hardware, CISPR 25 for automotive, CISPR 22 for industrial and medical products, FCC 47 CFR Part 15, EN 55011 and the IEC 61000 series. The service model is engineering rather than reporting: design review and consultation, root cause identification, countermeasure development, filter design and PCB planning, simulation-based performance prediction, failure investigation and compliance documentation support - so customers typically arrive with a product that has already failed elsewhere. No NABL or ISO/IEC 17025 accreditation is published, consistent with a pre-compliance and consulting facility, and it is recorded here without an accreditation entry. Industries served span defence, aeronautical, automotive, industrial, scientific, medical and general consumer electronics. Specialisations are near-field scanning and emission localisation, EMC failure root cause analysis, filter and PCB design for compliance, and simulation-led pre-compliance prediction.

Yadav Measurements Pvt. Ltd. (YMPL)

Website →

Yadav Measurements is an independent Indian testing and calibration laboratory in the RIICO Bhamashah Industrial Area at Kaladwas, Udaipur, Rajasthan, and it is the only laboratory in this directory outside Europe accredited by UKAS, the United Kingdom Accreditation Service, in addition to NABL accreditation to ISO/IEC 17025 and Telecommunication Engineering Centre designation - a combination that lets a single report serve Indian, British and wider international acceptance. Its historical centre of gravity is electricity metering: the laboratory is widely used for electrical and EMI/EMC testing of energy meters, supported by calibration of measuring instruments and a mobile 220 kV testing capability, and it holds MID certification partnerships for European measuring instrument approval. EMC coverage spans on-site, pre-compliance and full compliance testing - radiated and conducted emission, harmonic current and flicker, radiated and conducted immunity, electrostatic discharge, electrical fast transient and burst, surge immunity, voltage disturbances, magnetic field immunity and bulk current injection - run against CISPR 32 and the IEC and EN 61000-3 and 61000-4 series. The business is organised around eight sectors: power, gas, IT and telecommunications, healthcare, automation and control, automotive, lighting and luminaires, and a training academy, and it supports OEMs through product testing, regulatory testing, design verification and audit and inspection. Specialisations are energy meter and metering equipment EMC, power and gas sector instrumentation, MID measuring instrument approval, accredited calibration, and UKAS-recognised testing from India.