EMC Testing Labs in Delhi NCR – Accredited Facilities

ConsultancyAbsolute Veritas

Website →

Absolute Veritas is an Indian regulatory compliance and certification consultancy based at Molar Band Extension in Badarpur, South Delhi, with more than fifteen years in the field. It is important to be clear about what it is: the company does not operate its own EMC chambers. It states that it has partnered with laboratories in India and abroad and provides lab test liaisoning, coordinating test programmes and managing the interface with auditors and certifying authorities on a client's behalf. For a manufacturer that needs a compliance outcome rather than chamber time, that is a distinct and useful service, and the firm's published EMC scope reflects the programmes it manages: harmonic current emission, voltage flicker and fluctuation, conducted emission on both mains and telecom ports, radiated emission, electrostatic discharge, radiated susceptibility, power and pulsed magnetic field immunity, electrical fast transient, surge and conducted RF immunity, assessed against the EMC Directive 2014/30/EU and the IEC and EN 61000 families. Its real depth is in Indian and regional market access: BIS certification including the ISI mark and the Foreign Manufacturers Certification Scheme, TEC for telecom equipment, WPC wireless approvals, CDSCO for medical devices and FSSAI for food contact, with quality control and inspection services extended across twelve Asian countries. No accreditation of its own is published, which is consistent with a consultancy rather than a test house. Specialisations are BIS and FMCS certification, TEC and WPC approvals, CDSCO registration, third-party inspection, and managed EMC test programmes for European, Australian, Japanese and North American markets.

Alpha Test House

Website →

Alpha Test House is a broad-scope Indian analytical testing and certification laboratory at Paschim Vihar in west New Delhi, serving Delhi NCR, Haryana and Chandigarh. The organisation states that it is accredited by NABL and approved by the Bureau of Indian Standards, and operates an ISO 9001:2015 quality system; its NABL scope documentation is not published on its website, so whether electromagnetic compatibility falls inside the accredited scope could not be confirmed - much of the laboratory's visible reputation rests on toy testing, where it is described as a NABL-accredited facility, alongside environmental and water analysis. The disciplines offered run to more than thirty, from EMI/EMC and RF and wireless through consumer durables, telecom, LED and luminaires, IT and electronics, wire and cable, batteries and UAV and drone testing, to footwear, toys, road and building materials, metals and alloys, non-destructive testing, microbiology, textiles, food and agricultural produce, water, soil and geotechnics, environmental and pollution monitoring, chemicals and fertilisers. On the EMC side the published standard set covers CISPR 11, 12, 15, 25 and 32 for emissions and the IEC and EN 61000-4 series for immunity, including the magnetic field and voltage interruption parts, with shielding effectiveness measurement offered as a distinct service - unusual in a general-purpose laboratory and useful for enclosure and cabinet manufacturers. Note that a second Alpha Test House address exists nearby at Peera Garhi, so confirm which site performs EMC work before shipping hardware. Specialisations are multi-discipline Indian regulatory compliance, toys and consumer products, LED and lighting, cables and batteries, and shielding effectiveness measurement.

Bharat Test House Pvt. Ltd. (BTH)

Website →

Bharat Test House runs its principal laboratory in the HSIIDC industrial estate at Rai in Sonipat, Haryana, with a Delhi office at Azadpur, and describes itself as the only privately owned independent testing laboratory in Delhi NCR and Haryana holding EMI/EMC accreditation. Its credentials are unusually layered for an Indian private laboratory: NABL accreditation to ISO/IEC 17025, FCC and Industry Canada recognition for North American market access, Bureau of Indian Standards recognition across several product categories including electric hair dryers, massagers, soldering irons and electronic switches and dimmers, CDSCO approval for medical device testing, and IECEE CB Testing Laboratory designation for solar photovoltaic modules under IEC 61215-2 and IEC 61730-2. EMC facilities comprise a 3 metre semi-anechoic chamber, a 10 metre open area test site and a shielded room for CE marking work, covering radiated and conducted emissions and susceptibility, immunity, electromagnetic shielding performance, electrostatic discharge, voltage dips and interruptions, adjacent signal selectivity, spurious emissions and power frequency magnetic field immunity against the CISPR 11 to 24 families, the IEC 61000-4 series and the EN 55011, 55014 and 55015 standards. The surrounding capability is what makes the site unusual: two C-type goniophotometers for LED and luminaire photometry, a 500 kW facility for testing UPS systems and solar inverters, India's first NABL-accredited solar simulator calibration laboratory, what the company claims is the country's largest domestic refrigerator testing capacity, Indian-language mobile handset testing, and AGMARK recognition for agricultural produce. Specialisations are solar photovoltaic and inverter testing, LED and luminaire photometry, white goods and appliances, EV batteries, and Indian regulatory certification across BIS, FCC and IC.

Conformity Testing Labs Private Limited

Website →

Conformity Testing Labs is a NABL-accredited and BIS-recognised independent laboratory running two units a few hundred metres apart in the Mayapuri Industrial Area of west New Delhi, one at WH-52 and one at A-33 in Phase I. The laboratory's published EMC programme is a complete ten-test European and Indian compliance suite rather than a partial offering: conducted and radiated emission to CISPR 15 and CISPR 32, harmonic current emission and voltage fluctuation and flicker to IEC 61000-3-2 and 61000-3-3, and immunity to electrostatic discharge, electrical fast transients and bursts, surge, power frequency magnetic fields, voltage dips and interruptions, and DC power port interruption to IEC 61000-4-29 - the last an often-omitted test that matters for DC-fed telecom and industrial equipment. Work is run to Indian IS standards alongside the CISPR and IEC originals, which is the combination a manufacturer needs for BIS certification and CE marking in one pass, and the laboratory serves residential, commercial, industrial and military product categories. Reviewers describe it as a fast and reliable route to BIS certification, and the wider business covers electrical and electronics safety testing and calibration alongside EMC. Operating six days a week, it functions as a general-purpose Delhi compliance house for electronics manufacturers and importers. Specialisations are BIS certification support, lighting and luminaire EMC to CISPR 15, telecom and IT product compliance, and combined EMC with electrical safety testing.

Delhi Test House

Website →

Delhi Test House, operating from the Azadpur Industrial Area on GT Karnal Road in north Delhi, is among the oldest commercial testing laboratories in India, issuing test reports since 1975, and is NABL accredited, BIS recognised and ISO certified. Its EMC and EMI compliance facility sits inside an exceptionally wide multi-discipline operation rather than standing alone, and that breadth is the laboratory's defining characteristic: electrical products including cables, transformers, wiring accessories, meters and cells and batteries; domestic electrical appliances; electronics covering audio equipment, luminaires, components, IT equipment and power supplies; rubber and polymer products; fire extinguishers; toys and sports equipment; building materials with non-destructive testing; metals, alloys, ores and minerals; food, agricultural, AYUSH and pharmaceutical products; and water and pollution analysis. For a manufacturer whose product needs EMC evidence alongside materials, chemical or safety testing for BIS certification, that single-window scope is the practical draw. EMC work is run against the Indian IS standards adopted from the CISPR and IEC originals together with the IEC 61000 immunity series. Note that the EMC page cited in this directory no longer resolves on the laboratory's site, so the capability detail here is drawn from its contact and service listings and the published discipline list rather than from a dedicated EMC scope page, and the EMC scope may be narrower than the breadth of the wider laboratory suggests. Specialisations are BIS certification across many product families, electrical and cable testing, domestic appliances, and combined EMC with chemical and materials analysis.

EMC Testing and Compliance LLP

Website →

EMC Testing and Compliance LLP, founded in 2016 at Pace City I in Sector 37, Gurugram, is a multi-discipline Indian testing, inspection, certification and training house accredited to ISO/IEC 17025:2017, recognised by the Bureau of Indian Standards and designated by the Telecommunication Engineering Centre (TEC) - the designation required for Indian telecom equipment approval under the mandatory testing and certification regime. Its practical centre of gravity has become energy efficiency as much as electromagnetic compatibility: the laboratory is heavily used for Bureau of Energy Efficiency star rating testing, notably on BLDC ceiling fans since star rating became mandatory, with customers describing years of consistent turnaround on sixty or more fan models. Around that sit BIS and ISI testing, CE certification, RoHS and ELV substance compliance, REACH, environmental testing, TEC telecom testing and - unusually for an EMC-named laboratory - leather and footwear testing, reflecting a client base spanning leather and footwear, automotive, toys, home appliances, chemicals, electrical and electronics and hard goods. EMC work is run to the IEC, IS and EN families. For a manufacturer needing BIS certification, BEE star rating and EMC evidence from one supplier, the combination is efficient, and reviewers consistently cite accurate results and regulatory guidance as the reason for long-term relationships. Specialisations are BEE energy efficiency star rating, BIS and ISI certification, TEC telecom approval, home appliances and ceiling fans, and leather and footwear testing.

ConsultancyEVTL India (Emphatic Vans and Testing Labs Pvt. Ltd.)

Website →

EVTL India, formally Emphatic Vans and Testing Labs Pvt. Ltd., operates from Sector 63 in Noida with a registered office at Laxmi Nagar in Delhi, and its practical business is regulatory certification consultancy rather than chamber operation. Customer accounts consistently describe it as a BIS consultant: managing documentation, guiding manufacturers through Bureau of Indian Standards audits, coordinating the licence process and handling the interface with auditors from start to finish. On the EMI and EMC side it provides regulatory guidance, pre-compliance testing and end-to-end certification support against the standards its clients need - FCC Part 15, MIL-STD-461 and MIL-STD-464, the ISO, IEC and CISPR families, and IEC 60601-1-2 for medical devices - covering both emissions and immunity, conducted and radiated. The company is ISO certified, MSME registered and a FICCI member, and carries Great Place to Work, Clutch and UpCity recognitions, but publishes no NABL or ISO/IEC 17025 accreditation and does not describe owned chambers, so it is recorded here without an accreditation entry and is best understood as a compliance consultancy that arranges and manages testing rather than performing accredited measurement itself. Its customer base spans medical devices, consumer electronics, aerospace, military systems, telecommunications and healthcare. Specialisations are BIS certification and audit management, Indian regulatory market access, pre-compliance EMC coordination, and end-to-end certification programme management.

HLL Lifecare Limited - EMC/EMI Testing Laboratory

Website →

HLL Lifecare Limited is a Government of India enterprise with its registered office at Poojappura in Thiruvananthapuram, Kerala, and it operates a dedicated EMC/EMI testing laboratory in Sector 62, Noida aimed squarely at the Indian medical device sector. The laboratory is accredited to ISO/IEC 17025:2017 by NABL under accreditation number TC-11078 and holds CDSCO registration TL/MD/2023/000002 - the combination that allows its reports to support medical device registration under India's Medical Device Rules 2017, which is the specific reason manufacturers come to it. The facility is built around a 3 metre semi-anechoic chamber for radiated measurement together with instrumentation for what it describes as all eleven basic tests: radiated and conducted emission to CISPR 11, electrostatic discharge immunity to IEC 61000-4-2, radiated immunity to 61000-4-3, conducted immunity to 61000-4-6, surge to 61000-4-5, electrical fast transient and burst to 61000-4-4, voltage dips and interruptions to 61000-4-11, power frequency magnetic field immunity to 61000-4-8, harmonic emission to 61000-3-2 and flicker emission to 61000-3-3 - which is precisely the test set IEC 60601-1-2 calls up for medical electrical equipment. That focused completeness rather than breadth is the laboratory's character: it does one standard thoroughly rather than many partially. Specialisations are medical electrical equipment EMC to IEC 60601-1-2, CDSCO medical device registration support, and Indian Medical Device Rules compliance.

House of Testing

Website →

House of Testing is a NABL-accredited and BIS-recognised independent testing laboratory in Sector 5, Noida, serving the Delhi NCR manufacturing and importing base. Customer accounts describe a well organised laboratory with notably fast turnaround, singling out battery testing to Bureau of Indian Standards requirements as an area where it delivers faster than expected - a useful signal given how much Indian compliance work now centres on cells, battery packs and chargers. Its EMI and EMC service covers the emission and immunity suite that BIS certification and CE marking call for: conducted and radiated emission to the CISPR 11, 14, 15 and 32 families as adopted into the Indian IS standards, harmonic current and flicker emission, and the IEC 61000-4 immunity series including electrostatic discharge, electrical fast transient, surge, radiated and conducted RF immunity, power frequency magnetic field and voltage dips and interruptions. Testing sits alongside electrical safety and battery work rather than standing alone, which suits a manufacturer closing out several BIS product standards at once. Note that the laboratory's own website could not be retrieved during research - houseoftesting.com refused automated access - so the capability detail here is drawn from verified business listings and customer accounts rather than from its own published scope, and the accredited EMC scope should be confirmed before booking. Specialisations are BIS certification support, cell and battery testing, electrical safety, and fast-turnaround compliance testing for Delhi NCR manufacturers.

Marquistech

Website →

Marquistech is a globally operating ISO 17025:2017-accredited testing organization headquartered in Mumbai, India, with a US office in Austin, Texas and additional offices across Europe, Asia, and the Americas. Founded in 2005, the company serves over 27 OEMs/ODMs, chipset manufacturers, and telecom operators worldwide, with deep expertise in mobile device testing, 5G, automotive, and IoT. The EMI/EMC testing facility is a newly launched capability offering both pre-compliance and full compliance testing. EMC testing covers emissions to CISPR 11 (ISM equipment), CISPR 32 (multimedia equipment), and CISPR 15 (lighting equipment), along with the full IEC/EN 61000-4 immunity series including ESD (IEC 61000-4-2), radiated RF immunity (IEC 61000-4-3), EFT/burst (IEC 61000-4-4), surge (IEC 61000-4-5), conducted RF immunity (IEC 61000-4-6), voltage dips and interruptions (IEC 61000-4-11), and DC input immunity (IEC 61000-4-29).

Planet Electro Labs

Website →

Planet Electro Labs is an ISO/IEC 17025 accredited test laboratory near Ramesh Nagar metro station in west New Delhi, operating as both an EMC test house and a supplier of EMC test equipment - a combination that gives it unusually direct familiarity with the instrumentation it runs. Its published immunity scope is the practical core of the business: electrostatic discharge, electrical fast transient and burst, surge immunity, voltage dips and interruptions including the IEC 61000-4-29 DC power port test, and magnetic field immunity. The emission and immunity standards it works to span the CISPR product families - CISPR 12 and 14-1 and 14-2 for vehicles and household appliances, CISPR 15 for lighting and CISPR 32 for multimedia - together with the IEC and EN 61000 series and the EN 55014 appliance standards, and it also tests to MIL-STD-461 for defence equipment, which is a wider reach than its size suggests. Note that the laboratory's own website refused automated retrieval during research, so the capability detail here is drawn from its directory listing and verified business records rather than its own service pages; its NABL registration number and the full accredited scope should be confirmed directly. Industries served span industrial equipment, laboratory instrumentation, medical devices, railway and telecommunications products. Specialisations are transient and surge immunity testing, appliance and lighting product EMC, laboratory and medical instrumentation, and EMC test equipment supply.

Pride Testing Services Pvt Ltd (Pride Testing Lab)

Website →

Pride Testing Services operates its own EMC laboratory at the NX-One complex in Tech Zone IV, Greater Noida West, serving the Delhi NCR electronics manufacturing base. It is an ISO/IEC 17025 accredited facility issuing NABL-accredited reports, built around semi-anechoic chamber facilities for radiated emission measurement. The published test programme is the complete European and Indian compliance suite rather than a partial offering: on the emission side radiated and conducted emission, harmonic current and flicker measurement; on the immunity side electrostatic discharge, radiated and conducted RF immunity, electrical fast transient and burst, surge and voltage dips and interruptions, run against the IEC 61000-4 series, the CISPR families, EN standards, FCC requirements and MIL-STD-461 for defence equipment. Alongside accredited testing the laboratory offers pre-compliance measurement, product-specific test planning and technical documentation and reporting, which suits manufacturers iterating a design rather than only closing one out. Its customer base spans consumer electronics, IT and multimedia equipment, telecom and wireless products, industrial equipment, medical devices, automotive and transportation electronics and smart and IoT devices. Confirm the current accredited scope before booking, as the laboratory presents its accreditation in general terms rather than publishing a scope document. Specialisations are multi-sector CE and BIS compliance testing, IoT and smart device EMC, pre-compliance measurement with test planning, and Delhi NCR regional service.

URS Products and Testing (URS Labs)

Website →

URS Products and Testing, trading as URS Labs, is a NABL-accredited multi-site Indian laboratory running two units in Sector 5, Noida and two more near Pune - at Mahalunge Khed and in MIDC Phase II at Varale - which puts it within reach of both the Delhi NCR and western automotive supply bases. Its EMC programme is notably complete across both the commercial and automotive standard families: conducted and radiated emission, conducted susceptibility, electrostatic discharge, electrical fast transient, current harmonics, transient immunity, voltage variations and surge testing, run against the IEC 61000 series, CISPR 11, 14-1, 14-2, 25, 32 and 35, the European railway and road traffic system standards, and the ISO 11452, ISO 10605 and ISO 7637-2 automotive families. The Noida site combines EMI/EMC testing on the ground floor with shock and vibration facilities and further testing across several floors, so a component can be taken through electromagnetic and mechanical qualification in one visit. The customer base is unusually wide - automotive, telecommunications, IT and audio-visual, multimedia, lighting, household appliances, machinery, railway equipment, battery management systems, medical devices, electric vehicle chargers and road traffic systems - with CE certification support for European market access alongside Indian BIS work. Customer feedback on service quality is mixed, with several reports of poor communication and handling after testing alongside positive accounts of the facility itself, so it is worth establishing expectations in writing. Specialisations are automotive component EMC, battery management systems and EV chargers, railway and road traffic equipment, and combined EMC with shock and vibration testing.