dresden elektronik ingenieurtechnik gmbh - Test Laboratory
About
dresden elektronik ingenieurtechnik is a Dresden-based engineering and manufacturing services provider - an E2MS house covering development, production, test system construction and obsolescence management - whose in-house test laboratory performs type testing (Typpruefung) on its own and customers' electronics. The laboratory structures its EMC work into the four classical quadrants and publishes them that way: conducted emissions (EMIC) covering radio disturbance voltage, disturbance current, harmonic currents, voltage fluctuations and flicker; conducted immunity (EMSC) covering electrostatic discharge, conducted RF current, fast transients, surge voltages and voltage dips; radiated emissions (EMIR) covering disturbance field strength together with near-field probe investigation; and radiated immunity (EMSR) covering electrostatic discharge, radiated RF fields and both power-frequency and pulsed magnetic fields. The inclusion of pulsed magnetic field immunity and systematic near-field probing is notable - the first is a standard most general-purpose laboratories omit, and the second reflects a diagnostic rather than pass-fail orientation, consistent with a facility whose main customer is the company's own design department. Device safety testing and environmental testing run alongside EMC, with quality management and obsolescence management offered as engineering services. The company publishes no ISO/IEC 17025 accreditation for the laboratory, so it is recorded here without one. Specialisations are wireless and Zigbee module electronics, industrial and lighting control systems, contract electronics development, and development-stage EMC type testing.
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 32, EN 55032, CISPR 11, EN 55011, CISPR 15, EN 55015, EN 61000-6-3, EN 61000-6-4 |
| Conducted Emissions | CISPR 32, EN 55032, CISPR 11, EN 55011, CISPR 15, EN 55015, EN 61000-6-3, EN 61000-6-4 |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, EN 55035, EN 61000-6-1, EN 61000-6-2 |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, EN 55035, EN 61000-6-1, EN 61000-6-2 |
| ESD | IEC 61000-4-2, EN 61000-4-2 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5 |
| Harmonics & Flicker | IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8, IEC 61000-4-9 |
| Pre-Compliance Testing | EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, CISPR 32 |
| Product Safety | EN 62368-1, EN 61010-1, EN 60335-1, EN 60598-1 |
| Environmental Testing | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60529 |
Certifications / Marks
| Certification |
|---|
| CE |
Industries Served
| Industry |
|---|
| Industrial Equipment |
| Consumer Electronics |
| Information Technology |
| Radio & Wireless |
| Energy & Power |
| Automotive |
| Lighting Products |
Major Equipment
| Equipment |
|---|
| EMC test laboratory |
| Shielded enclosure |
| EMI receiver |
| Spectrum analyser |
| Near-field probe set |
| LISN |
| CDN |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Harmonics and flicker analyser |
| RF immunity amplifier and antennas |
| Power-frequency and pulsed magnetic field coils |
| Electrical safety test benches |
| Environmental test chambers |
