IB-Lenhardt AG / IBL-Lab GmbH
St. Ingbert, Saarland, Germany
Am Roemerkastell 3, St. Ingbert, Saarland, 66386, Germany
About
IB-Lenhardt AG is a German antenna engineering house and global market-access consultancy whose accredited in-house test laboratory, IBL-Lab GmbH, sits at its St. Ingbert headquarters in Saarland. The group pairs antenna design and integration work - the business it was built on - with a full EMC, radio and wireless test capability, so that a module or finished product can be tuned, pre-tested and then formally certified without leaving the building. The laboratory holds DAkkS accreditation to DIN EN ISO/IEC 17025 under registration D-PL-21375-01-00, with partial scopes -01 through -04 covering EMC emissions and immunity, radio equipment parameters, SAR and specific product families. It operates as EU Notified Body 2784 under the Radio Equipment Directive 2014/53/EU, is a recognised FCC Telecommunication Certification Body and ISED Canada Foreign Certification Body, is designated for Japan (MIC Registered Certification Body) and Hong Kong (OFCA), and is a UK Approved Body for the UK Radio Equipment Regulations SI 2017/1206 - which lets a single submission be turned into CE, UKCA, FCC, ISED, MIC and HKTA grants in parallel. The lab is additionally a KBA Technical Service (category A) for automotive radio and EMC approval to UN-ECE R10, and a WPC-authorised Qi Authorised Test Laboratory for wireless power. Capability spans semi-anechoic and fully anechoic chambers, shielded rooms, SAR measurement positioners with phantom sets, antenna measurement and OTA positioners, conducted emissions and immunity benches with LISNs and CDNs, ESD, EFT/burst and surge generators, and harmonics and flicker analysers. Specialisations are antenna and RF module design, IoT, telematics and automotive connectivity, SAR and human-exposure assessment, RFID and NFC, and turnkey worldwide type approval across more than 190 countries.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| DAkkS |
| FCC Listed |
| FCC Certified |
| ISED (Canada) |
| MIC (Japan) |
| OFCA (Hong Kong) |
| EMC Directive 2014/30/EU |
| Radio Equipment Directive (RED) 2014/53/EU |
| UK Radio Equipment Regulations (SI 2017/1206) |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 32, EN 55032, CISPR 11, EN 55011, FCC Part 15B, FCC Part 15C, CISPR 25, EN 61000-6-3, EN 61000-6-4 |
| Conducted Emissions | CISPR 32, EN 55032, CISPR 11, EN 55011, FCC Part 15B, CISPR 25, EN 61000-6-3, EN 61000-6-4 |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, EN 55035, EN 61000-6-1, EN 61000-6-2, ISO 11452-2 |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, EN 55035, EN 61000-6-1, EN 61000-6-2 |
| Radiated Susceptibility | IEC 61000-4-3, ISO 11452-2, ISO 11452-3 |
| Conducted Susceptibility | IEC 61000-4-6, ISO 11452-4, ISO 7637-2 |
| ESD | IEC 61000-4-2, EN 61000-4-2, ISO 10605 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5 |
| Harmonics & Flicker | IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11, IEC 61000-4-29 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8 |
| Bulk Current Injection (BCI) | ISO 11452-4 |
| SAR Testing | IEC 62209-1, IEC 62209-2, IEC 62209-1528, EN 50360, EN 50566, EN 62479, EN 50663, FCC KDB 447498, RSS-102 |
| RFID Assessment | ETSI EN 302 208, ISO/IEC 18000-3, ISO/IEC 14443, ISO/IEC 15693, EN 300 330 |
| Radio Equipment Testing | ETSI EN 300 328, ETSI EN 301 893, ETSI EN 300 220, ETSI EN 300 330, ETSI EN 301 511, ETSI EN 301 908, ETSI EN 303 413, ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI EN 301 489-17, ETSI EN 301 489-19, ETSI EN 301 489-52, FCC Part 15.247, FCC Part 22, FCC Part 24, FCC Part 27, RSS-247, RSS-132, RSS-139 |
| Pre-Compliance Testing | CISPR 32, CISPR 25, IEC 61000-4-3, ETSI EN 300 328 |
| Automotive Component EMC | CISPR 25, ISO 11452-1, ISO 11452-2, ISO 11452-4, ISO 11452-5, ISO 7637-2, ISO 7637-3, ISO 10605, UN-ECE R10 |
| Automotive OEM Specifications | UN-ECE R10, CISPR 25, ISO 11452 series |
| MIL-STD-461 | MIL-STD-461G |
| Military EMC | MIL-STD-461G |
| Commercial Aviation EMC | RTCA DO-160G Section 20, RTCA DO-160G Section 21 |
| Medical Device EMC | EN 60601-1-2, IEC 60601-1-2 |
Certifications / Marks
| Certification |
|---|
| CE |
| UKCA |
| FCC |
| ISED |
| MIC (Giteki) |
| HKTA |
| RCM |
| KC |
| NCC |
| SRRC |
| Anatel |
| UN-ECE E-mark |
| Qi |
| Bluetooth |
| Wi-Fi |
Industries Served
| Industry |
|---|
| Automotive |
| Consumer Electronics |
| Information Technology |
| Radio & Wireless |
| Telecommunications |
| Industrial Equipment |
| Medical Devices |
| Multimedia |
| Aerospace & Defense |
Major Equipment
| Equipment |
|---|
| Semi-anechoic chamber |
| Fully anechoic chamber |
| Shielded room |
| SAR measurement system |
| Tissue-simulating phantoms |
| OTA antenna measurement positioner |
| Antenna measurement range |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Harmonics and flicker analyser |
| Vector network analyser |
| Automotive load simulation bench |
| Qi wireless power test system |
