MessTechnikNord GmbH

Wedel, Schleswig-Holstein, Germany

Industriestrasse 29, Wedel, Schleswig-Holstein, 22880, Germany

Visit Website Get Quote Claim this listing

1 / 2

About

MessTechnikNord (MTN) at Wedel on the western edge of Hamburg traces its laboratory back to 1968, when it was the measurement department of AEG, and has run as an independent, family-managed GmbH since 2000; a second site at Jena was added in 2013. The depth of its accreditation record is unusual: the calibration laboratory has been accredited since 1979, originally under the DKD and now under DAkkS, and the EMC test laboratory since 1993, with ILAC recognition covering both. That combination - an accredited calibration house inside an accredited test house - means measurement traceability is handled in-house rather than shipped out. The Wedel site operates four semi-anechoic absorber chambers plus shielded rooms and environmental simulation facilities, and offers on-site measurement for equipment that cannot be transported. Testing covers conducted and radiated emissions, the full IEC 61000-4 immunity series, harmonics and flicker, automotive component and vehicle EMC, and combined EMC and environmental qualification of complete systems, so a customer can take a device through the whole programme with one provider. MTN is a designated Technical Service (KBA-P00072) for UN-ECE R10 automotive type approval, and employs a staff of more than forty engineers and technicians. Specialisations are automotive and E-mark approval, maritime and industrial electronics, combined EMC and climatic-mechanical qualification, and accredited calibration of EMC measurement instrumentation.

Accreditations

Accreditation
ISO/IEC 17025
DAkkS
EMC Directive 2014/30/EU

Testing Services

Test Type	Applicable Standards
Radiated Emissions	CISPR 11, EN 55011, CISPR 32, EN 55032, CISPR 25, EN 61000-6-3, EN 61000-6-4, EN 60945, UN-ECE R10
Conducted Emissions	CISPR 11, EN 55011, CISPR 32, EN 55032, CISPR 25, EN 61000-6-3, EN 61000-6-4, EN 60945
Radiated Immunity	IEC 61000-4-3, EN 61000-4-3, EN 55035, EN 61000-6-1, EN 61000-6-2, ISO 11452-2, EN 60945, UN-ECE R10
Conducted Immunity	IEC 61000-4-6, EN 61000-4-6, EN 55035, EN 61000-6-1, EN 61000-6-2, EN 60945
Radiated Susceptibility	ISO 11452-2, ISO 11452-3, IEC 61000-4-3
Conducted Susceptibility	ISO 11452-4, ISO 7637-2, IEC 61000-4-6
ESD	IEC 61000-4-2, EN 61000-4-2, ISO 10605
EFT/Burst	IEC 61000-4-4, EN 61000-4-4
Surge Immunity	IEC 61000-4-5, EN 61000-4-5
Harmonics & Flicker	IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3, IEC 61000-3-11, IEC 61000-3-12
Voltage Dips/Interrupts	IEC 61000-4-11, EN 61000-4-11, IEC 61000-4-29
Power Frequency Magnetic Field	IEC 61000-4-8, EN 61000-4-8
Bulk Current Injection (BCI)	ISO 11452-4
Pre-Compliance Testing	CISPR 25, CISPR 32, IEC 61000-4-3, UN-ECE R10
Automotive Component EMC	CISPR 25, ISO 11452-2, ISO 11452-4, ISO 11452-5, ISO 7637-2, ISO 7637-3, ISO 10605, ISO 16750-2
Automotive Vehicle-Level EMC	UN-ECE R10, CISPR 12, ISO 11451-2
Automotive OEM Specifications	UN-ECE R10, CISPR 25, ISO 11452 series
Railway EMC	EN 50121-3-2, EN 50121-4, EN 50155
Medical Device EMC	EN 60601-1-2, IEC 60601-1-2
Environmental Testing	IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-78, IEC 60529
Mechanical Testing	IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-64

Certifications / Marks

Certification
CE
UN-ECE E-mark

Industries Served

Industry
Automotive
Industrial Equipment
Energy & Power
Railway
Medical Devices
Consumer Electronics
Information Technology
Telecommunications

Major Equipment

Equipment
Four semi-anechoic absorber chambers
Shielded rooms
EMI receiver
Spectrum analyser
LISN
CDN
BCI injection probes
ESD simulator
EFT/burst generator
Surge generator
Automotive transient generator (ISO 7637)
Harmonics and flicker analyser
RF power amplifiers and immunity antennas
Climatic chambers
Vibration and shock rigs
Mobile on-site EMC measurement equipment
DAkkS-accredited calibration laboratory for EMC instrumentation