TREO - Labor fuer Umweltsimulation GmbH
Neumuenster, Schleswig-Holstein, Germany
+49 4321 9653235Donaubogen 5, Neumuenster, Schleswig-Holstein, 24539, Germany
Additional locations (1)
About
TREO - Labor fuer Umweltsimulation runs two complementary German sites: the EMC laboratory at Neumuenster in Schleswig-Holstein and the environmental simulation, mechanical and materials testing facility in the HIT Technopark at Hamburg-Harburg. Both hold DAkkS accreditation to DIN EN ISO/IEC 17025:2018 under master registration D-PL-11203-01-00, with partial scope -01-01 covering environmental simulation, EMC, electrical safety and materials testing across both locations, and a separate partial scope -01-02 specifically for EMC testing to FCC requirements for the United States market. EMC coverage runs from conducted and radiated emission and susceptibility measurement through electrostatic discharge and electromagnetic field survey to compass safe distance determination - the marine measurement that establishes how close equipment may be mounted to a vessel's magnetic compass, a capability tied to the laboratory's shipbuilding customers. The defence and aerospace programme is run to MIL-STD-461 for EMC and MIL-STD-810 for environmental qualification. Around those sit the Hamburg capabilities: climatic and thermal shock testing, vibration, mechanical shock, static acceleration, pressure, IP and IK protection ratings, acoustics and inclination testing, materials work covering chemical resistance, fire behaviour, corrosion and weathering, and electrical safety including insulation resistance, high-voltage, protective conductor and leakage current measurement with recently added EN 62368-1 scope. The laboratory markets a development-accompanying programme under the name SPRINT, building test campaigns that run from specification through to approval rather than only at the end. Specialisations are aviation and aerospace, shipbuilding and defence, rail, e-bikes and pedelecs, automotive and renewable energy.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| DAkkS |
| FCC Listed |
| EMC Directive 2014/30/EU |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 11, EN 55011, CISPR 32, EN 55032, EN 61000-6-3, EN 61000-6-4, MIL-STD-461G RE101, MIL-STD-461G RE102, RTCA DO-160G Section 21, EN 60945, EN 50121-3-2, FCC Part 15B, FCC Part 15C |
| Conducted Emissions | CISPR 11, EN 55011, CISPR 32, EN 55032, EN 61000-6-3, EN 61000-6-4, MIL-STD-461G CE101, MIL-STD-461G CE102, RTCA DO-160G Section 21, EN 60945, FCC Part 15B |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, EN 61000-6-1, EN 61000-6-2, MIL-STD-461G RS103, RTCA DO-160G Section 20, EN 60945 |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, EN 61000-6-1, EN 61000-6-2, MIL-STD-461G CS114, RTCA DO-160G Section 20 |
| Radiated Susceptibility | MIL-STD-461G RS101, MIL-STD-461G RS103, RTCA DO-160G Section 20 |
| Conducted Susceptibility | MIL-STD-461G CS101, MIL-STD-461G CS114, MIL-STD-461G CS115, MIL-STD-461G CS116 |
| ESD | IEC 61000-4-2, EN 61000-4-2, RTCA DO-160G Section 25, ISO 10605 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5, RTCA DO-160G Section 22 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11, IEC 61000-4-29 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8, MIL-STD-461G RE101, MIL-STD-461G RS101 |
| Pre-Compliance Testing | MIL-STD-461G, RTCA DO-160G, CISPR 32, IEC 61000-4-3 |
| Military EMC | MIL-STD-461G, MIL-STD-810H |
| MIL-STD-461 | MIL-STD-461G |
| Commercial Aviation EMC | RTCA DO-160G Section 15, RTCA DO-160G Section 17, RTCA DO-160G Section 19, RTCA DO-160G Section 20, RTCA DO-160G Section 21, RTCA DO-160G Section 22, RTCA DO-160G Section 25 |
| Railway EMC | EN 50121-3-2, EN 50121-4, EN 50155 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 7637-2, ISO 10605, EN 15194 |
| Product Safety | EN 62368-1, EN 61010-1, EN 60335-1, EN 15194, IEC 60529 |
| Environmental Testing | MIL-STD-810H, RTCA DO-160G Section 4, RTCA DO-160G Section 5, RTCA DO-160G Section 6, RTCA DO-160G Section 10, RTCA DO-160G Section 11, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-11, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-52, IEC 60068-2-78, IEC 60529, IEC 62262, ISO 4892-2 |
| Mechanical Testing | MIL-STD-810H, RTCA DO-160G Section 7, RTCA DO-160G Section 8, IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-31, IEC 60068-2-64, EN 61373 |
Certifications / Marks
| Certification |
|---|
| CE |
| UKCA |
| FCC |
| MIL-STD qualification |
| DO-160 qualification |
Industries Served
| Industry |
|---|
| Aerospace & Defense |
| Military |
| Railway |
| Automotive |
| Energy & Power |
| Industrial Equipment |
| Consumer Electronics |
Major Equipment
| Equipment |
|---|
| EMC absorber chamber |
| Shielded rooms |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| RF power amplifiers and immunity antennas |
| Compass safe distance measurement set |
| EMF survey field probes |
| Climatic and thermal shock chambers |
| Vibration and mechanical shock rigs |
| Static acceleration (centrifuge) rig |
| Pressure and altitude chambers |
| IP and IK protection test rigs |
| Acoustic measurement facility |
| Inclination test rig |
| Salt spray and corrosion chambers |
| Weathering and UV chambers |
| Fire and flammability test benches |
| Electrical safety, high-voltage and leakage current benches |
