Applus+ Laboratories (LGAI Technological Center S.A.)
Part of Applus+ Laboratories
Bellaterra, Barcelona, Spain
+34 900 103 067Campus UAB, Ronda de la Font del Carme s/n, Bellaterra, Barcelona, 08193, Spain
About
Applus+ Laboratories is the testing division of the Applus+ group, operating as LGAI Technological Center S.A. - the former Laboratori General d'Assaigs i Investigacions, Catalonia's general testing and research laboratory - from the Autonomous University of Barcelona campus at Bellaterra, north-west of the city. It is one of the broadest testing organisations in this directory, running structural, materials, non-destructive, building product and fire testing alongside EMC, wireless and electrical safety, environmental testing, materials characterisation for computer-aided engineering simulation, and cybersecurity evaluation, with certification and calibration arms attached. The EMC credential that matters most is specific and recent: its Barcelona facility has been approved by Stellantis for full-scope EMC testing, which means the carmaker accepts the laboratory for its complete internal specification rather than for selected tests - a designation that takes years to obtain and places it among the small group of European laboratories able to close out a Stellantis EMC programme. Certification services include product certification and market access, CE marking, radio type approval, and certification and auditing, with security evaluations against GSMA eSA, EMVCo and Common Criteria for payment and eSIM products - an unusual pairing of EMC with formal security certification. Named industries span aerospace and space, automotive, construction, drones and urban air mobility, electrical and electronics, energy, industry and transport, information and communications technology, medical devices, payment systems and electronic identity, pharmaceuticals and fine chemicals, railway, and seats and cabin interiors. Specialist lines include power electronics and grid code compliance and composite materials. Specialisations are Stellantis full-scope automotive EMC, power electronics and grid code compliance, radio type approval, security certification, and EMC within a very broad multidisciplinary laboratory.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| ISO/IEC 17065 |
| EMC Directive 2014/30/EU |
| Radio Equipment Directive (RED) 2014/53/EU |
| IECEE CB Scheme |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 11, EN 55011, CISPR 32, EN 55032, CISPR 14-1, CISPR 15, CISPR 25, CISPR 12, FCC Part 15B, EN 61000-6-3, EN 61000-6-4, EN 50121-3-2, UN-ECE R10 |
| Conducted Emissions | CISPR 11, EN 55011, CISPR 32, EN 55032, CISPR 14-1, CISPR 15, CISPR 25, FCC Part 15B, EN 61000-6-3, EN 61000-6-4 |
| Radiated Immunity | EN 61000-4-3, EN 55035, EN 55014-2, EN 61000-6-1, EN 61000-6-2, ISO 11452-2, EN 50121-4, EN 60601-1-2, UN-ECE R10 |
| Conducted Immunity | EN 61000-4-6, EN 55035, EN 55014-2, EN 61000-6-1, EN 61000-6-2, ISO 11452-4, EN 60601-1-2 |
| Conducted Susceptibility | ISO 7637-2, ISO 7637-3, ISO 11452-4, ISO 16750-2, EN 61000-4-6 |
| ESD | EN 61000-4-2, ISO 10605, EN 60601-1-2 |
| EFT/Burst | EN 61000-4-4, IEC 61000-4-4 |
| Surge Immunity | EN 61000-4-5, IEC 61000-4-5, EN 61000-4-12 |
| Harmonics & Flicker | EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12, EN 61000-4-7 |
| Voltage Dips/Interrupts | EN 61000-4-11, EN 61000-4-29, EN 61000-4-34 |
| Power Frequency Magnetic Field | EN 61000-4-8, EN 61000-4-9 |
| Bulk Current Injection (BCI) | ISO 11452-4 |
| Pre-Compliance Testing | CISPR 25, CISPR 32, EN 61000-4-3, UN-ECE R10 |
| SAR Testing | EN 62209-1, EN 62209-2, EN 50566, IEC 62311, EN 62479 |
| Radio Equipment Testing | ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI EN 301 489-17, ETSI EN 300 328, ETSI EN 301 893, ETSI EN 303 645, ETSI EN 18031-1, FCC Part 15.247, RSS-247 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 11452-4, ISO 7637-2, ISO 7637-3, ISO 10605, ISO 16750-2, UN-ECE R10 |
| Automotive Vehicle-Level EMC | UN-ECE R10, CISPR 12, ISO 11451-2 |
| Automotive OEM Specifications | Stellantis full-scope EMC specification, CISPR 25, ISO 11452 series |
| Railway EMC | EN 50121-1, EN 50121-2, EN 50121-3-1, EN 50121-3-2, EN 50121-4, EN 50121-5 |
| Commercial Aviation EMC | RTCA/DO-160G Section 20, RTCA/DO-160G Section 21 |
| Medical Device EMC | EN 60601-1-2, EN 61326-2-6 |
| Medical Device Regulatory | Regulation (EU) 2017/745 (MDR), EN 60601-1, ISO 13485 |
| Environmental Testing | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-11, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-78, IEC 60529 |
| Mechanical Testing | IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-64, ISO 16750-3 |
| Product Safety | EN 62368-1, EN 60335-1, EN 61010-1, EN 60598-1, EN 60601-1, EN 50549-1, Common Criteria (ISO/IEC 15408), GSMA eSA, EMVCo, Directive 2014/35/EU |
Certifications / Marks
| Certification |
|---|
| CE |
| UKCA |
| Radio type approval |
| Stellantis full-scope EMC approval |
| IECEE CB Certificate |
| Common Criteria |
| GSMA eSA |
| EMVCo |
| Product certification and market access |
Industries Served
| Industry |
|---|
| Automotive |
| Aerospace & Defense |
| Railway |
| Consumer Electronics |
| Information Technology |
| Medical Devices |
| Energy & Power |
| Industrial Equipment |
| Telecommunications |
| Radio & Wireless |
| Household Appliances |
Major Equipment
| Equipment |
|---|
| EMC and wireless test chambers (dimensions not published) |
| Automotive EMC facility approved by Stellantis for full-scope testing |
| SAR measurement system |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| BCI injection probes |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Automotive transient generator (ISO 7637) |
| Harmonics and flicker analyser |
| RF power amplifiers and immunity antennas |
| Power electronics and grid code compliance test facility |
| Environmental and climatic chambers |
| Structural, materials and non-destructive test facilities |
| Fire testing laboratory |
| Cybersecurity and security evaluation laboratory |
| Industrial calibration and 3D metrology laboratories |





