
DENSO EMC Engineering Service Corporation
About
DENSO EMC Engineering Service Corporation operates from the DENSO headquarters campus at Showa-cho in Kariya, Aichi Prefecture - the heart of the Toyota-group supplier belt - and the scale of its facility is in a different class from almost anything else in this directory: sixteen anechoic chambers and twelve shielded rooms, running emissions and immunity tests on both devices under test and wire harnesses. That chamber count matters because automotive EMC programmes are schedule-driven and a Tier 1 supplier validating dozens of electronic control units cannot queue them through one or two rooms. The published test parameters are precise rather than promotional. Radiated emissions run from 9 kHz to 6 GHz and conducted emissions from 10 kHz to 200 MHz for voltage and 10 kHz to 1 GHz for current, all to CISPR 25 and vehicle manufacturer specifications. Radiated immunity covers 400 MHz to 4 GHz at 200 V/m, extended down to 200 MHz at the same 200 V/m for vertical polarisation only, to ISO 11452-2. Stripline immunity to ISO 11452-5 runs 10 kHz to 1 GHz at 200 V/m, and portable transmitter immunity to ISO 11452-9 covers 360 MHz to 4 GHz at up to 20 W. The capability that genuinely sets it apart is radar pulse immunity at 1.2 to 1.4 GHz and 2.7 to 3.1 GHz, both at 600 V/m - field strengths three times the usual automotive immunity level, aimed at the L-band and S-band radar environments a vehicle may encounter near airports and coastal installations, and a test very few laboratories anywhere can perform. Testing is carried out to CISPR 25, the ISO 11452 series and carmakers' own specifications. No third-party accreditation is published, so the laboratory is recorded here without an accreditation entry; it should be read as a manufacturer-grade automotive EMC facility offering its capacity as a service. Specialisations are automotive component and harness EMC at high volume, high-field radar pulse immunity, and OEM specification testing for the Japanese vehicle industry.
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 25, CISPR 12, Vehicle manufacturer (OEM) specifications |
| Conducted Emissions | CISPR 25, Vehicle manufacturer (OEM) specifications |
| Radiated Immunity | ISO 11452-2, ISO 11452-5, ISO 11452-9, Vehicle manufacturer (OEM) specifications |
| Conducted Immunity | ISO 11452-4, Vehicle manufacturer (OEM) specifications |
| Radiated Susceptibility | ISO 11452-2, ISO 11452-5, ISO 11452-9, Radar pulse immunity (OEM specifications) |
| Conducted Susceptibility | ISO 7637-2, ISO 7637-3, ISO 11452-4, Vehicle manufacturer (OEM) specifications |
| Bulk Current Injection (BCI) | ISO 11452-4, Vehicle manufacturer (OEM) specifications |
| ESD | ISO 10605, IEC 61000-4-2 |
| Pre-Compliance Testing | CISPR 25, ISO 11452-2, ISO 11452-4, ISO 11452-5, ISO 11452-9 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 11452-4, ISO 11452-5, ISO 11452-9, ISO 7637-2, ISO 10605 |
| Automotive OEM Specifications | CISPR 25, ISO 11452-2, ISO 11452-5, ISO 11452-9, Toyota EMC specifications, Vehicle manufacturer radar pulse immunity specifications |
Certifications / Marks
| Certification |
|---|
| Vehicle manufacturer (OEM) test reports |
| UN-ECE E-mark support |
Industries Served
| Industry |
|---|
| Automotive |
| Industrial Equipment |
| Radio & Wireless |
Major Equipment
| Equipment |
|---|
| 16 anechoic chambers for emissions and immunity on DUTs and wire harnesses |
| 12 shielded rooms |
| Radiated emissions measurement 9 kHz - 6 GHz |
| Conducted emissions: voltage 10 kHz - 200 MHz, current 10 kHz - 1 GHz |
| Radiated immunity 400 MHz - 4 GHz at 200 V/m (vertical polarisation from 200 MHz) |
| Radar pulse immunity 1.2 - 1.4 GHz and 2.7 - 3.1 GHz, both at 600 V/m |
| Portable transmitter immunity 360 MHz - 4 GHz up to 20 W (ISO 11452-9) |
| Stripline immunity 10 kHz - 1 GHz at 200 V/m (ISO 11452-5) |
| High-power RF amplifiers and immunity antennas |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| BCI injection probes |
| Automotive transient generator (ISO 7637-2 / -3) |
| Automotive ESD simulator (ISO 10605) |
| Wire harness test fixturing |





