EMC Japan Corp.
Sagamihara, Kanagawa, Japan
+81 42-784-8005210-3 Nagatake, Midori-ku, Sagamihara, Kanagawa, 252-0154, Japan
About
EMC Japan Corp. was founded in 1989 and works from Nagatake in Midori-ku, Sagamihara, Kanagawa Prefecture, with further test sites at Sagamihara and at Kariya in Aichi - its site numbering runs at least to an eleventh test site, which gives a sense of how the capacity is distributed. It is accredited by NVLAP, the United States National Voluntary Laboratory Accreditation Program, as both an EMC test laboratory and a calibration body, under lab codes 200584-0 for the head office and 201066-0 for Kariya, and is VCCI-registered for conducted emission and for field strength measurement at both 3 metres and 10 metres. Its equipment list is the most distinctive in Japan on this directory. It operates a reverberation chamber reaching 3,000 V/m, with more than ten years of experience since being the first to introduce the method domestically - a technique that excites a mode-stirred cavity to produce statistically uniform high fields without the antenna positioning a conventional chamber requires. It has an EMP facility rated to 50 kV/m, described as the first of its kind in Japan. A 144 kVA stabilised high-power supply feeds a large anechoic chamber whose access door measures 3 metres wide by 3.5 metres high, so heavy industrial and vehicle-scale equipment can be driven at full load. A further anechoic chamber is built to cleanroom grade, meeting US FED-STD-209D class 100,000, for precision equipment that cannot tolerate particulate contamination during test. Test fixtures are designed and built in-house by its development department, and its measurement software, both automated and manual, is written in-house. Market reach includes UN ECE Regulation 10 and E-marking with VCA engineers present at issuance, FCC Part 15 Subpart B and Part 18 reports, appointment as a BSMI EMC laboratory for Taiwan covering CNS 13438, CNS 15936, CNS 13803 and CNS 13783-1, EN 45501 and OIML reports through NMi for measuring instruments, and status as a certified Mazda test laboratory since 2005. It is ISO/IEC 27001 certified under registration IS 803365. Specialisations are reverberation chamber testing, EMP and high-field immunity, high-power and cleanroom-grade chamber work, and defence, aviation and space EMC.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| NVLAP |
| VCCI (Japan) |
| BSMI (Taiwan) |
| FCC Listed |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 11, CISPR 32, VCCI-CISPR 32, FCC Part 15B, FCC Part 18, ANSI C63.4, CNS 13438, CNS 15936, CNS 13803, CNS 13783-1, MIL-STD-461G RE102, RTCA DO-160G Section 21, CISPR 25, UN-ECE R10 |
| Conducted Emissions | CISPR 11, CISPR 32, VCCI-CISPR 32, FCC Part 15B, FCC Part 18, ANSI C63.4, CNS 13438, MIL-STD-461G CE101, MIL-STD-461G CE102, RTCA DO-160G Section 21, CISPR 25 |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, CISPR 35, MIL-STD-461G RS103, RTCA DO-160G Section 20, ISO 11452-2, ISO 11452-11, UN-ECE R10 |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, CISPR 35, MIL-STD-461G CS114, RTCA DO-160G Section 20, ISO 11452-4 |
| Radiated Susceptibility | MIL-STD-461G RS101, MIL-STD-461G RS103, MIL-STD-461G RS105, ISO 11452-11, RTCA DO-160G Section 20 |
| Conducted Susceptibility | MIL-STD-461G CS101, MIL-STD-461G CS114, MIL-STD-461G CS115, MIL-STD-461G CS116, ISO 7637-2 |
| ESD | IEC 61000-4-2, EN 61000-4-2, ISO 10605 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5 |
| Harmonics & Flicker | IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8, MIL-STD-461G RS101 |
| Bulk Current Injection (BCI) | ISO 11452-4, MIL-STD-461G CS114 |
| Pre-Compliance Testing | CISPR 32, MIL-STD-461G, IEC 61000-4-3, CISPR 25, VCCI-CISPR 32 |
| Military EMC | MIL-STD-461F, MIL-STD-461G, MIL-STD-464, NDS (Japan Ministry of Defense Standard) |
| MIL-STD-461 | MIL-STD-461F, MIL-STD-461G |
| Commercial Aviation EMC | RTCA DO-160G Section 19, RTCA DO-160G Section 20, RTCA DO-160G Section 21, RTCA DO-160G Section 22 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 11452-4, ISO 7637-2, ISO 10605, UN-ECE R10 |
| Automotive OEM Specifications | Mazda certified laboratory specifications (2024 revision), CISPR 25, ISO 11452 series |
| Radio Equipment Testing | FCC Part 15.247, FCC Part 18, VCCI-CISPR 32, CNS 15936 |
| Product Safety | EN 45501, OIML R76, IEC 62368-1, IEC 61010-1 |
Certifications / Marks
| Certification |
|---|
| VCCI |
| FCC |
| BSMI |
| CE |
| UN-ECE E-mark |
| NVLAP 200584-0 |
| NVLAP 201066-0 |
| Mazda certified laboratory (since 2005) |
| NMi EN 45501 / OIML reports |
| ISO/IEC 27001 (IS 803365) |
Industries Served
| Industry |
|---|
| Aerospace & Defense |
| Military |
| Automotive |
| Consumer Electronics |
| Industrial Equipment |
| Information Technology |
| Energy & Power |
| Radio & Wireless |
Major Equipment
| Equipment |
|---|
| Reverberation chamber (RVC) to 3,000 V/m - first domestic introduction in Japan |
| EMP test facility to 50 kV/m - first of its kind in Japan |
| Large anechoic chamber with 3.0 m W x 3.5 m H access door |
| 144 kVA stabilised high-power supply |
| Cleanroom-grade anechoic chamber to US FED-STD-209D class 100,000 |
| VCCI-registered 3 m and 10 m field strength measurement sites |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| BCI injection probes |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Harmonics and flicker analyser |
| High-power RF amplifiers and immunity antennas |
| In-house designed custom test fixtures |
| In-house automated and manual measurement software |
| NVLAP-accredited calibration laboratory |
