EMC Testhaus GmbH & Co. KG
Siegen, North Rhine-Westphalia, Germany
+49 271 38 27 02Eiserfelder Strasse 316, Siegen, North Rhine-Westphalia, 57080, Germany
About
EMC Testhaus GmbH & Co. KG at Eiserfelder Strasse 316 in Siegen, North Rhine-Westphalia, is a DAkkS-accredited EMC laboratory operating under registration number D-PL-21526-01-00 to DIN EN ISO/IEC 17025:2018. Its accreditation is unusually well segmented, with separate partial certificates for EMC (-01-01 and -01-02), EMC on medical devices (-01-02), EMC for KBA vehicle type approval (-01-03), FCC requirements (-01-04) and Canadian standards (-01-05), plus a regularly updated published list of test procedures within the flexible accreditation scope. The FCC and Canadian partial accreditations are the notable ones - they let the laboratory support FCC Part 15 and Part 18 Supplier's Declaration of Conformity and Canadian market access directly from Germany. Test equipment covers emission to 18 GHz and immunity to 6 GHz, with equipment for single- and three-phase devices to a maximum 32 A. The facility comprises an absorber chamber with ferrite absorbers, a second absorber chamber with pyramidal absorbers, two weather-independent open-area test sites offering 3 m and 10 m measurement distances, and three shielded cabins; all test and measurement equipment is maintained and calibrated on a fixed cycle per the quality manual, with unbroken traceability of results. As a KBA-designated body it runs type approval procedures for electrical and electronic sub-assemblies (EUB) under UN-R10, verifications under Regulation (EU) 2018/858, BCI testing to ISO 11452-4 over 100 kHz to 400 MHz, testing under the German e-scooter road-traffic regulation, and automotive manufacturer requirements. Medical work covers active medical devices and IVD equipment to DIN EN 60601-1-2:2016 and DIN EN 61326-2-6:2013. The laboratory also holds Germanischer Lloyd recognition for marine work, and performs human EMF exposure assessment in both occupational health contexts (BGV B11, Directive 2013/35/EU) and general population contexts (EU Council Recommendation 1999/519/EC and the 26th German Federal Immission Control Ordinance). Services include full type testing across emission and immunity, development-accompanying measurement, interference suppression, spot tests to verify existing results, and on-site measurement at the installation location.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| DAkkS |
| FCC Listed |
| ISED (Canada) |
| EMC Directive 2014/30/EU |
| Radio Equipment Directive (RED) 2014/53/EU |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | EN 55011, EN 55032, EN 61000-6-3, EN 61000-6-4, Emission test equipment up to 18 GHz, Absorber chamber (ferrite absorbers), Absorber chamber (pyramidal absorbers), Two weather-independent open-area sites (3 m / 10 m) |
| Conducted Emissions | EN 55011, EN 55032, EN 61000-6-3, EN 61000-6-4, Single- and three-phase equipment up to 32 A |
| Radiated Immunity | EN 61000-4-3, EN 61000-6-1, EN 61000-6-2, Immunity test equipment up to 6 GHz |
| Conducted Immunity | EN 61000-4-6, EN 61000-6-1, EN 61000-6-2 |
| ESD | EN 61000-4-2 |
| EFT/Burst | EN 61000-4-4 |
| Surge Immunity | EN 61000-4-5 |
| Harmonics & Flicker | EN 61000-3-2, EN 61000-3-3, Single- and three-phase up to 32 A |
| Voltage Dips/Interrupts | EN 61000-4-11 |
| Power Frequency Magnetic Field | EN 61000-4-8 |
| Bulk Current Injection (BCI) | ISO 11452-4, 100 kHz - 400 MHz |
| Automotive Component EMC | UN-R10 type approval of electrical/electronic sub-assemblies (EUB), Regulation (EU) 2018/858 verifications, ISO 11452-4, German e-scooter (Elektrokleinstfahrzeuge) regulation, Automotive manufacturer requirements |
| Automotive Vehicle-Level EMC | UN-R10, KBA-designated body (Kraftfahrtbundesamt Flensburg), E1 type approval procedures |
| Medical Device EMC | DIN EN 60601-1-2:2016, DIN EN 61326-2-6:2013, Active medical devices and IVD equipment, Directive 2007/47/EC, IVD Directive 98/79/EC |
| Radio Equipment Testing | Radio Equipment Directive 2014/53/EU, FCC Part 15 and Part 18 Supplier's Declaration of Conformity (SDoC), Canadian standards (DAkkS partial accreditation -01-05) |
| Pre-Compliance Testing | Development-accompanying measurement, Interference suppression measures (Entstoerungsmassnahmen), Spot tests to verify existing results, On-site measurement at the installation location, Consulting on standards and declaration of conformity |
| Product Safety | Human EMF exposure: BGV B11 / Directive 2013/35/EU (occupational), EU Council Recommendation 1999/519/EC (general population), 26th German Federal Immission Control Ordinance (26. BImSchV), Germanischer Lloyd (marine) recognition |
Certifications / Marks
| Certification |
|---|
| CE |
| FCC SDoC |
| UN-R10 / E1 type approval |
| KBA-designated body (Flensburg) |
| Germanischer Lloyd |
| EU Declaration of Conformity |
Industries Served
| Industry |
|---|
| Automotive |
| Consumer Electronics |
| Energy & Power |
| Household Appliances |
| Industrial Equipment |
| Information Technology |
| Medical Devices |
| Radio & Wireless |
Major Equipment
| Equipment |
|---|
| Absorber chamber with ferrite absorbers |
| Absorber chamber with pyramidal absorbers |
| Two weather-independent open-area test sites (3 m and 10 m) |
| Three shielded cabins |
| Emission test equipment up to 18 GHz |
| Immunity test equipment up to 6 GHz |
| Test equipment for single- and three-phase devices (max 32 A) |
| BCI system 100 kHz - 400 MHz |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Conducted RF immunity system |
| Harmonics and flicker analysers |
| Human EMF exposure measurement equipment |
| Mobile on-site measurement equipment |
| Calibration programme with unbroken traceability |
