EMCE GmbH
Burgrieden, Baden-Wuerttemberg, Germany
+49 7392 911370Untere Wiesen 1, Burgrieden, Baden-Wuerttemberg, 88483, Germany
About
EMCE GmbH is an accredited EMC testing laboratory and engineering office for EMC testing and circuit development at Untere Wiesen 1 in Burgrieden, between Ulm and Biberach in Baden-Wuerttemberg. Its accreditation structure is the notable feature: DAkkS accreditation to DIN EN ISO/IEC 17025 under master certificate D-PL-12122-01-00, with five separate partial certificates - EMC and telecommunications (-01-01), ISED Canada (-01-02), FCC USA (-01-03), automotive/KBA (-01-04) and medical (-01-05). Holding discrete DAkkS partial accreditations specifically for FCC and ISED means North American market access can be handled from Burgrieden rather than routed through a US or Canadian laboratory, and the company is additionally recognised by the Bundesnetzagentur as a listed measuring station and as a conformity assessment body recognised by US authorities, with reports carried by the MRA and ILAC-MRA. The facility centres on a fully anechoic room with absorber material lining the ceiling, floor and walls, backed by alternative open-area test sites at 3 m and 10 m measurement distances, and a variable power supply rated 3 x 5,000 W or 1 x 10,000 W. Test procedures are validated in accordance with DIN EN 61326-1 for precise and reproducible results, and internal quality assurance documents and reviews every test operation. Named sector coverage spans automotive, medical, household appliances, IT and multimedia, radio, and industry and rail. Beyond measurement the company offers pre- and post-test engineering work including circuit and layout review and advice on device concept design, drawing on its own background in product development and circuit design - positioning itself as a laboratory that can diagnose and fix an EMC problem rather than only reporting it.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| DAkkS |
| FCC Listed |
| ISED (Canada) |
| EMC Directive 2014/30/EU |
| Radio Equipment Directive (RED) 2014/53/EU |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | EN 55011, EN 55032, EN 55014-1, EN 61000-6-3, EN 61000-6-4, FCC Part 15B, Fully anechoic room (FAR), Open area test sites at 3 m and 10 m |
| Conducted Emissions | EN 55011, EN 55032, EN 55014-1, EN 61000-6-3, EN 61000-6-4, FCC Part 15B |
| Radiated Immunity | EN 61000-4-3, EN 61000-6-1, EN 61000-6-2, EN 55035 |
| Conducted Immunity | EN 61000-4-6, EN 61000-6-1, EN 61000-6-2 |
| ESD | EN 61000-4-2 |
| EFT/Burst | EN 61000-4-4 |
| Surge Immunity | EN 61000-4-5 |
| Harmonics & Flicker | EN IEC 61000-3-2, EN 61000-3-3, Variable supply 3 x 5,000 W / 1 x 10,000 W |
| Voltage Dips/Interrupts | EN 61000-4-11 |
| Power Frequency Magnetic Field | EN 61000-4-8 |
| Automotive Component EMC | UN-R 10, CISPR 25, DAkkS D-PL-12122-01-04 (KBA scope) |
| Automotive Vehicle-Level EMC | UN-R 10 / E1 type approval via KBA scope |
| Railway EMC | EN 50121-x railway applications |
| Medical Device EMC | EN 60601-1-2, EN 61326-1, DAkkS D-PL-12122-01-05 (medical scope) |
| Radio Equipment Testing | Radio Equipment Directive 2014/53/EU, ETSI EN 301 489-x, FCC USA (DAkkS D-PL-12122-01-03), ISED Canada (DAkkS D-PL-12122-01-02), Bundesnetzagentur listed measuring station |
| Pre-Compliance Testing | Pre- and post-test engineering activities, Circuit and layout review, Advice on device concept design, Support during the development phase, Validated procedures per DIN EN 61326-1 |
| Product Safety | EN 61326-1, Low Voltage Directive 2014/35/EU |
Certifications / Marks
| Certification |
|---|
| CE |
| FCC |
| ISED (IC) |
| E1 / UN-R 10 type approval |
| Bundesnetzagentur listed measuring station |
| MRA |
| ILAC-MRA |
Industries Served
| Industry |
|---|
| Automotive |
| Consumer Electronics |
| Household Appliances |
| Industrial Equipment |
| Information Technology |
| Medical Devices |
| Multimedia |
| Radio & Wireless |
| Railway |
Major Equipment
| Equipment |
|---|
| Fully anechoic room (FAR) - absorber-lined ceiling, floor and walls |
| Open area test sites (OATS) at 3 m and 10 m measurement distances |
| Variable power supply 3 x 5,000 W / 1 x 10,000 W |
| EMI measurement receivers and spectrum analyser |
| LISN / artificial mains networks |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Conducted RF immunity system |
| RF field generation system |
| Harmonics and flicker analysers |
| Voltage dip simulator |
| Magnetic field immunity coils |
| Networked test and measurement instrumentation |
