
LAHARI - Advanced Electronics Test Facility, Mysore ESDM Cluster
Mysuru, Karnataka, India
+91 99805 42377Plot No. 336/4 and 336/5, Infosys Road, Hebbal Industrial Area, Mysuru, Karnataka, 570016, India
About
LAHARI is the Advanced Electronics Test Facility of the Mysore ESDM Cluster, established in the Hebbal Industrial Area at Mysuru with support from the Government of India and the Government of Karnataka, and operated in partnership with the Norwegian certification group Nemko - a pairing that gives a regional cluster facility access to international certification routes. Its anchor asset is a 10 metre semi-anechoic chamber, described by visitors as the largest in the region and among the more affordable EMC chambers in Karnataka, supported by environmental and mechanical test facilities including temperature shock, shock and vibration. The published EMC programme is unusually broad for a cluster facility, spanning radiated and conducted emissions and susceptibility, electrical fast transient, electrostatic discharge, surge, harmonic emission, voltage fluctuation and flicker, power frequency and pulsed magnetic field immunity, AC and DC voltage dip and interruption, and power disturbance testing - run against CISPR 32 and CISPR 35 for multimedia, CISPR 11, 12, 14 and 25 for industrial, vehicle and household products, the ISO 11452 and ISO 10605 automotive families, the IEC 61000 series, IEC 60601-1-2 for medical equipment, FCC Part 15B, the Indian AIS automotive standards, MIL-STD-461G and RTCA DO-160. Covering commercial, automotive, medical, military and aerospace standard families in one facility is rare at this scale, and the inclusion of pulsed magnetic field immunity is a test many general-purpose laboratories omit. Specialisations are IT and audio-video products, automotive electronics, household appliances, laboratory test and measurement equipment, medical and healthcare equipment, and military and aerospace hardware.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| NABL |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 32, CISPR 11, CISPR 12, CISPR 14-1, CISPR 25, FCC Part 15B, MIL-STD-461G RE102, RTCA DO-160G Section 21, AIS 004 (Part 3), IEC 61000-6-3, IEC 61000-6-4 |
| Conducted Emissions | CISPR 32, CISPR 11, CISPR 14-1, CISPR 25, FCC Part 15B, MIL-STD-461G CE102, RTCA DO-160G Section 21, IEC 61000-6-3, IEC 61000-6-4 |
| Radiated Immunity | IEC 61000-4-3, CISPR 35, CISPR 14-2, ISO 11452-2, MIL-STD-461G RS103, RTCA DO-160G Section 20, IEC 60601-1-2, IEC 61000-6-1, IEC 61000-6-2 |
| Conducted Immunity | IEC 61000-4-6, CISPR 35, ISO 11452-4, MIL-STD-461G CS114, IEC 60601-1-2, IEC 61000-6-1, IEC 61000-6-2 |
| Radiated Susceptibility | MIL-STD-461G RS101, MIL-STD-461G RS103, ISO 11452-2, ISO 11452-3, RTCA DO-160G Section 20 |
| Conducted Susceptibility | MIL-STD-461G CS101, MIL-STD-461G CS114, MIL-STD-461G CS115, MIL-STD-461G CS116, ISO 7637-2, ISO 7637-3 |
| ESD | IEC 61000-4-2, ISO 10605, IEC 60601-1-2 |
| EFT/Burst | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, RTCA DO-160G Section 22 |
| Harmonics & Flicker | IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-11, IEC 61000-3-12 |
| Voltage Dips/Interrupts | IEC 61000-4-11, IEC 61000-4-29, IEC 61000-4-34 |
| Power Frequency Magnetic Field | IEC 61000-4-8, IEC 61000-4-9, MIL-STD-461G RS101 |
| Bulk Current Injection (BCI) | ISO 11452-4, MIL-STD-461G CS114 |
| Pre-Compliance Testing | CISPR 32, CISPR 25, MIL-STD-461G, IEC 61000-4-3, AIS 004 (Part 3) |
| Medical Device EMC | IEC 60601-1-2, IEC 61326-2-6 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 11452-4, ISO 11452-5, ISO 7637-2, ISO 7637-3, ISO 10605, AIS 004 (Part 3) |
| Military EMC | MIL-STD-461G |
| MIL-STD-461 | MIL-STD-461G |
| Commercial Aviation EMC | RTCA DO-160G Section 17, RTCA DO-160G Section 19, RTCA DO-160G Section 20, RTCA DO-160G Section 21, RTCA DO-160G Section 22 |
| Radio Equipment Testing | ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 300 328, FCC Part 15C |
| Environmental Testing | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-78, IEC 60529 |
| Mechanical Testing | IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-64 |
Certifications / Marks
| Certification |
|---|
| CE |
| BIS |
| FCC |
| AIS / CMVR compliance |
| Nemko Mark |
Industries Served
| Industry |
|---|
| Information Technology |
| Multimedia |
| Automotive |
| Household Appliances |
| Medical Devices |
| Aerospace & Defense |
| Military |
| Industrial Equipment |
| Consumer Electronics |
| Energy & Power |
Major Equipment
| Equipment |
|---|
| 10 m semi-anechoic chamber |
| Shielded rooms |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| BCI injection probes |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Automotive transient generator (ISO 7637) |
| Harmonics and flicker analyser |
| Power frequency and pulsed magnetic field coils |
| AC and DC voltage dip and interruption simulator |
| RF power amplifiers and immunity antennas |
| Temperature shock chambers |
| Environmental and climatic chambers |
| Shock and vibration test rigs |





