EMC Testing Labs in Bengaluru – Accredited Facilities
Bengaluru is India’s largest single-city EMC cluster in this directory. Addresses stored as Bengaluru or Bangalore both match. Mysuru does not—it stays on the Karnataka page because it is a separate city, not a suburb.
12
Listed labs
5
Labs with listed accreditations
2
Metro areas
Accredited EMC labs in Bengaluru
12 listed facilities, 5 with accreditations on file.
BE Analytic Solutions is a NABL-accredited test laboratory in the Devasandra Industrial Estate at Mahadevapura in east Bengaluru, additionally accredited by the DGAQA - the Indian Ministry of Defence's Directorate General of Aeronautical Quality Assurance - for automotive, aerospace and defence work, which is the credential that opens Indian defence programmes to it. Its EMC scope is the deepest military method set of any laboratory in this directory outside the dedicated national facilities: the MIL-STD-461 programme covers CE101 and CE102 conducted emissions, CS101 and CS114 through CS118 conducted susceptibility - including the lightning induced transient and personnel-borne electrostatic discharge methods added in revision G - RE101 and RE102 radiated emissions, and RS101 through RS103 radiated susceptibility. Alongside that it runs the automotive families (CISPR 25, ISO 7637, ISO 10605 and ISO 11452), the commercial and industrial CISPR 11, 15, 25 and 32 and IEC 61000 series, railway EN 50121, and the aerospace RTCA DO-160 sections covering magnetic effects, power input, RF susceptibility and lightning effects. The environmental estate around the chambers is equally broad - altitude, drop, fungus and mould growth, humidity, high and low temperature, salt spray and corrosion, IP ingress, vibration, thermal cycling and thermal shock, run to MIL-STD, JSS 55555 and IEC standards - and the laboratory operates 24 hours a day, seven days a week, which customers cite as the reason they can compress a qualification programme. A reliability engineering and RAMS consultancy practice sits alongside the testing. Specialisations are defence and aerospace qualification, MIL-STD-461 and DO-160 programmes, automotive components, and combined EMC with environmental and reliability qualification.
Accreditations
Testing Services
CPDMED TBI is the MedTech and Geriatric Healthcare Technology Business Incubator attached to the Department of Design and Manufacturing at the Indian Institute of Science in Bangalore, housed in the Raman Building on the IISc campus. Its EMI/EMC facility exists to serve a specific gap: Indian medical device start-ups and small manufacturers that need to know whether a prototype will pass before committing to an accredited campaign. The approach is unusually transparent - the incubator publishes a fixed per-test price list, with radiated emission measurement to IEC 61000-6-3 at five thousand rupees and conducted emission, electrostatic discharge to IEC 61000-4-2, surge to IEC 61000-4-5, electrical fast transient to IEC 61000-4-4 and voltage dip and short interruption to IEC 61000-4-11 at three thousand rupees each, which makes iterative development testing affordable in a way commercial day rates do not. Instrumentation is correspondingly focused rather than comprehensive: line impedance stabilisation networks, a spectrum analyser and transient suppression devices, sufficient for diagnostic and pre-compliance work but not for accredited certification. As a university incubator facility it holds no ISO/IEC 17025 accreditation and is recorded here without one; its value is access to IISc's design and manufacturing expertise alongside the measurement. The wider centre focuses on developing affordable healthcare technology. Specialisations are medical device pre-compliance measurement for start-ups, affordable healthcare technology development, and design-stage EMC diagnosis.
Testing Services
C-PRAV is a global compliance partner with over 30 years of experience, providing end-to-end Standards, Regulations, Testing & Certification (SRTC) services. Their NATA (ILAC) accredited test lab is located at Unit A9, 2A Westall Road, Springvale, VIC 3171, Melbourne, Australia, offering EMC, Safety, Radio, RF Exposure, Cybersecurity, and Ingress Protection (IP) testing. C-PRAV has recently made headlines as the first Australian laboratory authorised by CSA Group for electrical safety testing for the North American (US/Canada) market. They have offices in Australia, New Zealand, India, Canada, Singapore, and France, and provide global market access services across 100+ countries.
Accreditations
Testing Services
Complus Systems operates a compact but genuinely equipped EMC laboratory on the first floor of a building in the Rajajinagar Industrial Town in west Bengaluru, combining test services with a business supplying EMC test equipment and antenna measurement systems. The laboratory centres on a semi-anechoic chamber covering radiated measurement to 3 GHz, with radiated emission and immunity, conducted emission and the IEC 61000-4 immunity series run to published scope: electrostatic discharge to IEC 61000-4-2, electrical fast transient to 61000-4-4, surge to 61000-4-5, RF conducted immunity to 61000-4-6 and voltage dips and interruptions to 61000-4-11. Its conducted emission capability is specified more precisely than most - three-phase AC up to 32 amperes and DC from 300 volts up to 32 amperes - which matters for inverters, drives and DC-fed industrial equipment that exceed a single-phase LISN's rating. A distinctive secondary capability is calibration of conducted pulse generators for both commercial and automotive waveforms, work normally done only by equipment manufacturers, and the company's RF facilities are used for troubleshooting as well as formal measurement. Customers describe a well maintained IEC compliance laboratory with knowledgeable technical staff. No ISO/IEC 17025 or NABL accreditation is published, so it is recorded here without an accreditation entry and is best understood as a development, pre-compliance and equipment specialist. Specialisations are IEC 61000 immunity testing, three-phase and DC conducted emission measurement, antenna test systems, and conducted pulse generator calibration.
Testing Services
Cosmic Compliance Test Lab is a NABL-accredited EMC house to ISO/IEC 17025:2017 with laboratories at Bommasandra on the southern industrial belt of Bengaluru and at the Annamalai Industrial Park in Kalapatti, Coimbatore. Although young - around five years of operation, with more than five hundred clients and a hundred and twenty projects reported - its chamber specification is serious: a component semi-anechoic chamber covering 10 kHz to 40 GHz and, separately, a vehicle semi-anechoic chamber with a two metre turntable, which puts whole electronic sub-assemblies and small vehicles inside a chamber rather than restricting the site to board-level work. Shielded control rooms support both, and an EMC scanner is in commissioning. The accredited programme spans CISPR 25 for automotive components, MIL-STD-461 including the RE102 radiated emission and bulk current injection methods, the IEC 61000 commercial and industrial series, and EN 50121 for railway equipment, with electrical fast transient and radiated emission and immunity across the range. The laboratory also holds a Designated Test Facility certificate. The 40 GHz ceiling paired with vehicle-level capability is an unusual combination at this scale in India, and customers single out developmental testing support, documentation help and cost relative to the larger international houses. Specialisations are automotive electronic sub-assembly EMC, aerospace and military MIL-STD-461 programmes, railway equipment, telecom and wireless products, and industrial, scientific and medical equipment.
Accreditations
Testing Services
EMC-RF Technology Solutions is an EMI/EMC and radio-frequency engineering practice in Vignan Nagar, east Bengaluru, founded and led by Dr. Lakkoju Narasimha Acharyulu, with a contact point in the United States. Its work is engineering-led rather than certification-led: the practice covers EMI and EMC design and analysis, RF and antenna design, signal integrity analysis, printed circuit board design, development of microwave components, and testing and validation against the FCC, EN, CISPR, ETSI and MIL-STD families - which means a customer typically arrives with a hardware problem to solve or a design to review rather than a product to certify. The breadth across design disciplines is the distinguishing feature; where most consultancies address either the layout or the chamber result, this one spans antenna design, board-level signal integrity and the regulatory limit in the same engagement, which suits programmes where the EMC failure and the RF performance problem share a root cause. The customer base spans medical, aerospace, automotive, defence, power and wireless sectors. No ISO/IEC 17025 or NABL accreditation is published and no owned chambers are described, so the practice is recorded here without an accreditation entry and is best understood as an EMC and RF engineering consultancy with validation capability rather than an accredited test house. Specialisations are EMI/EMC design and root-cause analysis, antenna and RF front-end design, signal integrity and PCB design review, and microwave component development.
Testing Services
EMI Solutions, trading internationally as EMIS, is an Indian manufacturer of EMI and EMC filters, feedthrough components, power quality products and surge protectors based in the Bommasandra Industrial Area on Hosur Road south of Bengaluru, and it runs an accredited EMI test facility alongside its design and production operations. That combination is the point of the business: when a customer's equipment fails an emission limit, the same organisation measures the problem and designs the filter that fixes it, and the laboratory is used for both in-house product qualification and external customer testing, in the laboratory or on site. Measurement spans 50 Hz to 40 GHz, covering conducted emission and conducted immunity, open-site radiated emission measurement, and military specification testing on single-phase filters rated up to 50 amperes. The company reports a commercial footprint across fourteen countries on three continents - India, Israel, Malaysia, Singapore, Thailand and Vietnam in Asia, France, Germany, Italy, the Netherlands, Sweden, Spain, Switzerland and the United Kingdom in Europe, and the United States - and names TE Connectivity, ABB, Enphase, Philips, Larsen & Toubro, Tata, Bharat Electronics, BHEL, Kone, Siemens and Godrej among its customers. Alongside testing it offers EMI design consulting and power quality and energy audits. Note that it describes its facility as accredited but publishes no NABL or ISO/IEC 17025 registration number, so it is recorded here without a formal accreditation entry; confirm the accredited scope before relying on it for certification. Specialisations are EMI and EMC filter design and manufacture, military-grade filters, power quality products, conducted emission and immunity measurement, and filter-level remediation engineering.
Testing Services
MiCOM Labs is a privately owned, A2LA-accredited testing and certification laboratory headquartered in Pleasanton, California. Founded in 2001 by Gordon Hurst, the company specializes in RF, EMC/EMI, 5G/cellular testing, antenna characterization, and global product certification. MiCOM Labs also has offices in Shenzhen, China and Bengaluru, India. On the EMC/EMI side, MiCOM Labs is accredited to test for North American, European, Asian, and other international markets. Their test infrastructure includes anechoic radiated chambers and capabilities spanning emissions and immunity testing — covering ESD, EFT, surge, conducted and radiated immunity, voltage dips and interruptions, harmonics and flicker, and power magnetic fields. Their EMC engineers also provide troubleshooting and debugging services, assisting with product design, pre-testing, and root cause analysis for non-compliance issues. Beyond EMC, MiCOM Labs has strong RF and wireless testing capabilities, including 5G and cellular testing and antenna characterization. The lab operates as an FCC-recognized Telecommunications Certification Body (TCB), enabling them to issue certifications directly rather than routing through the FCC. Their certification services extend to global market access, helping manufacturers obtain type approvals for international markets through their MiPassport regulatory intelligence platform. They also offer MiCybercert for cybersecurity compliance certification of connected devices, and MiCMS, a compliance collaboration system for managing certification data and workflows. MiCOM Labs positions itself with an "inch wide, mile deep" philosophy — focused specifically on wireless, EMC, and product certification rather than spreading across a broad range of testing disciplines.
Accreditations
Testing Services
NexorTest Technologies is an EMC testing and compliance services provider based at Nagarbhavi in west Bengaluru, on the Outer Ring Road service road near Malagala. It operates in the Bengaluru electronics cluster alongside the city's larger established laboratories, offering electromagnetic compatibility testing and compliance support across the European and international standard families that Indian manufacturers and exporters work to - conducted and radiated emission measurement, the IEC 61000-4 immunity series covering electrostatic discharge, electrical fast transient, surge, conducted and radiated RF immunity and voltage dips, and harmonic current and flicker emission - with pre-compliance measurement and regulatory guidance alongside. It is important to flag the limits of what could be verified here: the company's own website refused automated retrieval during research, so the detail in this entry is drawn from verified business records and directory listings rather than from NexorTest's published pages. Its accredited status, chamber specification and the precise extent of its test scope could not be confirmed, and it is consequently recorded without an accreditation entry and with a conservative test list; it may hold accreditation and offer a considerably wider scope than shown. Contact the laboratory directly to establish its current capability and accreditation before relying on this entry. Specialisations are EMC testing and compliance services for the Bengaluru electronics manufacturing base, pre-compliance measurement, and regulatory support.
Testing Services
TUV Rheinland India runs EMI and EMC test facilities at Bengaluru, Pune and Visakhapatnam, with further offices at Gurgaon, and the Visakhapatnam laboratory is the group's standout Indian asset. Opened in October 2020 inside the Andhra Pradesh MedTech Zone (AMTZ), it is accredited both by NABL to ISO/IEC 17025:2017 and by the American Association for Laboratory Accreditation (A2LA), and TUV Rheinland describes it as the only internationally certified facility in India accredited to 40 GHz - a ceiling that matters for radar, millimetre-wave and modern wireless hardware that lower-frequency Indian labs cannot close out. It houses both a 10 metre and a 3 metre anechoic chamber, the semi-anechoic chamber being the largest of its type anywhere in the TUV Rheinland network, and adds combined shock and vibration plus thermal shock chambers so EMC and environmental validation run on one site; its position within a medical technology park shapes a caseload weighted toward medical and in-vitro diagnostic equipment. The Bengaluru laboratory at Electronic City Phase 1 and the NABL-accredited MECF laboratory at Pune carry the industrial, automotive and appliance work, including bulk current injection, three-phase voltage dips and interruptions, click and discontinuous disturbance analysis, and on-site measurement. Across the Indian network TUV Rheinland is a Notified Body under the EMC Directive 2014/30/EU and an FCC-listed laboratory, and accredited standards span the CISPR 11, 12, 14, 25, 32 and 35 families, the IEC 61000-3 and 61000-4 series, the ISO 11452 and ISO 7637 automotive families, MIL-STD-461, and the Indian IS, AIS and SAE sets. Specialisations are medical devices and IVD equipment, automotive and e-mobility components, railway technology, lighting and household goods, and high-frequency work to 40 GHz.
Accreditations
Testing Services
Vincular Testing Labs India operates from the Surya Building in HSR Layout, Bengaluru, and its role in the compliance chain is guidance and certification management rather than chamber operation on the service covered here. For BIS ISI Mark certification it provides end-to-end licensing support for domestic and foreign manufacturers - Quality Control Order compliance, application preparation, coordination of the required testing through BIS-accredited laboratories, and management of the licence process through to grant - with parallel practices in BIS CRS registration, the newer Scheme X conformity assessment route and Legal Metrology compliance. That makes it a route for manufacturers facing India's expanding mandatory certification regime rather than a destination for EMC measurement itself, and the ISI service described here routes testing to third-party accredited laboratories rather than performing it in-house. The product categories it covers reflect where Quality Control Orders bite: electrical appliances, toys and consumer products, safety glass, LPG valves, tyres and tubes, and Portland cement. No NABL or ISO/IEC 17025 accreditation is published for this service and no owned chambers are described, so it is recorded here without an accreditation entry; note that the company's registered name includes Testing Labs and it may hold laboratory capability beyond the certification service documented here, which is worth confirming directly. Specialisations are BIS ISI Mark and CRS certification, Scheme X conformity assessment, Quality Control Order compliance, Legal Metrology, and foreign manufacturer licensing.
Testing Services
Vougavent Technologies is an EMI/EMC consulting practice in BTM Layout, Bengaluru, that runs its own in-house measurement facility for pre-compliance and diagnostic work rather than accredited certification. Its defining tool is near-field scanning: by mapping emissions directly above a board the practice localises a radiating structure to a specific track, component or connector, which is what allows it to claim resolution of more than a hundred EMC failures and the rapid turnaround it advertises. Measurement capability covers radiated emission, radiated susceptibility, electrostatic discharge, and surge and fast transient testing, applied against MIL-STD-461 for defence equipment, RTCA DO-160 for aeronautical hardware, CISPR 25 for automotive, CISPR 22 for industrial and medical products, FCC 47 CFR Part 15, EN 55011 and the IEC 61000 series. The service model is engineering rather than reporting: design review and consultation, root cause identification, countermeasure development, filter design and PCB planning, simulation-based performance prediction, failure investigation and compliance documentation support - so customers typically arrive with a product that has already failed elsewhere. No NABL or ISO/IEC 17025 accreditation is published, consistent with a pre-compliance and consulting facility, and it is recorded here without an accreditation entry. Industries served span defence, aeronautical, automotive, industrial, scientific, medical and general consumer electronics. Specialisations are near-field scanning and emission localisation, EMC failure root cause analysis, filter and PCB design for compliance, and simulation-led pre-compliance prediction.
Testing Services
Use this URL for “EMC testing Bengaluru” or “Bangalore.” Open the lab profile to see whether the site is a full NABL chamber or a narrower pre-compliance bench.
Major metro areas
Listed facilities in Bengaluru are concentrated around these cities and suburbs.
- Bengaluru
- Bangalore
Common test types requested in Bengaluru
Drawn from listed lab capabilities and the work teams in this region typically book.
- Conducted Emissions
- EFT/Burst
- Radiated Emissions
- Surge Immunity
- Conducted Immunity
- ESD
- Pre-Compliance Testing
- Radiated Immunity
Electronics and wireless EMC
Consumer, IT, and wireless products drive most Bengaluru bookings, alongside medical-electronics and industrial boards. Automotive plants are more often a Pune or Chennai conversation. Ask for CISPR 32 or the BIS method, immunity if the file needs IEC 61000-4, and the exact campus address.
Bengaluru vs. Pune or Hyderabad
Stay in Bengaluru when the design team is here. Use Pune for the Pune–Pimpri automotive and commercial cluster, and Hyderabad for the Telangana listings. The Karnataka page adds Mysuru.
Frequently asked questions
Quick answers about EMC testing in Bengaluru