EMC Latest
← Back to Labs Directory
SIRIM QAS International Sdn. Bhd.

SIRIM QAS International Sdn. Bhd.

Shah Alam, Selangor, Malaysia

+60 3-5544 6400

SIRIM Complex, No. 1 Persiaran Dato' Menteri, Section 2, P.O. Box 7035, Shah Alam, Selangor, 40700, Malaysia

1 / 2

About

SIRIM QAS International is the testing and certification arm of SIRIM Berhad, Malaysia's national standards and industrial research organisation, and operates from the SIRIM Complex on Persiaran Dato' Menteri in Section 2 of Shah Alam, Selangor, west of Kuala Lumpur. It is the dominant route to Malaysian market access for electrical, electronic and communications products: SIRIM QAS performs the conformity assessment behind the SIRIM label that communications and multimedia equipment must carry for the Malaysian Communications and Multimedia Commission, and runs product certification, inspection and import permit work alongside the testing. Its EMC capability is built on two anechoic chambers with a 3-metre antenna-to-equipment distance plus a genuine open area test site - the OATS is separately identified on the complex and remains the reference method against which chamber site attenuation is validated, so borderline chamber results can be resolved rather than merely repeated. The laboratory is accredited to ISO/IEC 17025 and operates as a notified laboratory, with ISO 9001 certification; its Penang laboratory was reported in 2026 to have achieved A2LA accreditation, extending United States acceptance. Shielding effectiveness testing is offered as a distinct service, which few general laboratories provide. The accredited standards reach well past the commercial directive set: alongside CISPR 11, 32 and 35, the IEC 61000-3 and 61000-4 series and FCC Part 15, it covers the automotive ISO 11452 series including parts 1, 4, 7, 8 and 10, ISO 7637 parts 1 to 3 and ISO 10605, plus MIL-STD-461 for military equipment and RTCA DO-160 for airborne equipment - an unusually broad span for a single national body. Radio frequency testing sits beside the EMC work. Industries served are automotive, household appliances, industrial equipment, laboratory equipment and medical devices. Note that SIRIM's own pages block automated retrieval, so this record is built from its indexed service pages, directory profiles and public listings; the complex publishes both 40000 and 40700 Shah Alam postcodes, the latter being the PO Box. Specialisations are Malaysian SIRIM label and MCMC certification, open area test site measurement, shielding effectiveness testing, and automotive, military and airborne EMC.

Accreditations

Accreditation
ISO/IEC 17025
IECEE CB Scheme
FCC Listed
APEC MRA

Testing Services

Test TypeApplicable Standards
Radiated EmissionsCISPR 11, CISPR 32, CISPR 14-1, CISPR 15, CISPR 25, EN 55011, EN 55032, EN 55022, FCC Part 15B, FCC Part 15C, ANSI C63.4, MS CISPR 32, MIL-STD-461G RE102, RTCA DO-160G Section 21
Conducted EmissionsCISPR 11, CISPR 32, CISPR 14-1, CISPR 15, CISPR 25, EN 55011, EN 55032, EN 55022, FCC Part 15B, ANSI C63.4, MIL-STD-461G CE101, MIL-STD-461G CE102, RTCA DO-160G Section 21
Radiated ImmunityIEC 61000-4-3, EN 61000-4-3, CISPR 35, CISPR 24, IEC 61000-6-1, IEC 61000-6-2, ISO 11452-2, MIL-STD-461G RS103, RTCA DO-160G Section 20
Conducted ImmunityIEC 61000-4-6, EN 61000-4-6, CISPR 35, CISPR 24, IEC 61000-6-1, IEC 61000-6-2, ISO 11452-4, MIL-STD-461G CS114
Radiated SusceptibilityMIL-STD-461G RS101, MIL-STD-461G RS103, ISO 11452-2, RTCA DO-160G Section 20
Conducted SusceptibilityMIL-STD-461G CS101, MIL-STD-461G CS114, MIL-STD-461G CS116, ISO 7637-1, ISO 7637-2, ISO 7637-3, ISO 11452-4
ESDIEC 61000-4-2, EN 61000-4-2, ISO 10605
EFT/BurstIEC 61000-4-4, EN 61000-4-4
Surge ImmunityIEC 61000-4-5, EN 61000-4-5
Harmonics & FlickerIEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3
Voltage Dips/InterruptsIEC 61000-4-11, EN 61000-4-11
Power Frequency Magnetic FieldIEC 61000-4-8, EN 61000-4-8, ISO 11452-8
Bulk Current Injection (BCI)ISO 11452-4, MIL-STD-461G CS114
Pre-Compliance TestingCISPR 32, CISPR 11, IEC 61000-4-3, FCC Part 15B, ISO 11452-2
Radio Equipment TestingFCC Part 15.247, FCC Part 15.407, ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17, MCMC technical specifications, ANSI C63.10
Automotive Component EMCISO 11452-1, ISO 11452-4, ISO 11452-7, ISO 11452-8, ISO 11452-10, ISO 7637-1, ISO 7637-2, ISO 7637-3, ISO 10605, CISPR 25
Military EMCMIL-STD-461F, MIL-STD-461G
MIL-STD-461MIL-STD-461F, MIL-STD-461G
Commercial Aviation EMCRTCA DO-160G Section 20, RTCA DO-160G Section 21
Medical Device EMCIEC 60601-1-2, IEC 61326-1
Environmental TestingIEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-78, IEC 60529
Product SafetyIEC 60335-1, MS IEC 60335-1, IEC 62368-1, IEC 61010-1, IEC 60598-1, IEC 60601-1

Certifications / Marks

Certification
SIRIM label (MCMC certification)
SIRIM product certification mark
CE
FCC
IECEE CB Certificate
ISO 9001
Malaysian import permit support

Industries Served

Industry
Automotive
Household Appliances
Industrial Equipment
Medical Devices
Consumer Electronics
Telecommunications
Radio & Wireless
Information Technology
Military
Aerospace & Defense

Major Equipment

Equipment
Two anechoic chambers, 3 m antenna-to-EUT distance
Open area test site (OATS) on the SIRIM Complex
Shielding effectiveness test apparatus
EMI receiver
Spectrum analyser
LISN
CDN
BCI injection probes
ESD simulator
EFT/burst generator
Surge generator
Harmonics and flicker analyser
Power frequency magnetic field coil
Automotive transient generator (ISO 7637-1 / -2 / -3)
RF power amplifiers and immunity antennas
Radio frequency test equipment
Environmental test chambers
Calibration and measurement laboratory
Penang laboratory (reported A2LA accreditation, 2026)