TUV Rheinland India Pvt Ltd
Visakhapatnam, Andhra Pradesh, India
AMTZ Campus, Pragati Maidan, Nadupuru, Visakhapatnam, Andhra Pradesh, 530031, India
Additional locations (2)
About
TUV Rheinland India runs EMI and EMC test facilities at Bengaluru, Pune and Visakhapatnam, with further offices at Gurgaon, and the Visakhapatnam laboratory is the group's standout Indian asset. Opened in October 2020 inside the Andhra Pradesh MedTech Zone (AMTZ), it is accredited both by NABL to ISO/IEC 17025:2017 and by the American Association for Laboratory Accreditation (A2LA), and TUV Rheinland describes it as the only internationally certified facility in India accredited to 40 GHz - a ceiling that matters for radar, millimetre-wave and modern wireless hardware that lower-frequency Indian labs cannot close out. It houses both a 10 metre and a 3 metre anechoic chamber, the semi-anechoic chamber being the largest of its type anywhere in the TUV Rheinland network, and adds combined shock and vibration plus thermal shock chambers so EMC and environmental validation run on one site; its position within a medical technology park shapes a caseload weighted toward medical and in-vitro diagnostic equipment. The Bengaluru laboratory at Electronic City Phase 1 and the NABL-accredited MECF laboratory at Pune carry the industrial, automotive and appliance work, including bulk current injection, three-phase voltage dips and interruptions, click and discontinuous disturbance analysis, and on-site measurement. Across the Indian network TUV Rheinland is a Notified Body under the EMC Directive 2014/30/EU and an FCC-listed laboratory, and accredited standards span the CISPR 11, 12, 14, 25, 32 and 35 families, the IEC 61000-3 and 61000-4 series, the ISO 11452 and ISO 7637 automotive families, MIL-STD-461, and the Indian IS, AIS and SAE sets. Specialisations are medical devices and IVD equipment, automotive and e-mobility components, railway technology, lighting and household goods, and high-frequency work to 40 GHz.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| NABL |
| A2LA |
| FCC Listed |
| EMC Directive 2014/30/EU |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 11, CISPR 12, CISPR 14-1, CISPR 25, CISPR 32, EN 55011, EN 55032, IEC 61000-6-3, IEC 61000-6-4, FCC Part 15B, FCC Part 15C, IS 6873, AIS 004 (Part 3) |
| Conducted Emissions | CISPR 11, CISPR 14-1, CISPR 25, CISPR 32, EN 55011, EN 55032, IEC 61000-6-3, IEC 61000-6-4, FCC Part 15B |
| Radiated Immunity | IEC 61000-4-3, EN 61000-4-3, CISPR 35, CISPR 14-2, IEC 61000-6-1, IEC 61000-6-2, ISO 11452-2, AIS 004 (Part 3) |
| Conducted Immunity | IEC 61000-4-6, EN 61000-4-6, CISPR 35, CISPR 14-2, IEC 61000-6-1, IEC 61000-6-2, ISO 11452-4 |
| Radiated Susceptibility | ISO 11452-2, ISO 11452-3, MIL-STD-461G RS103, IEC 61000-4-3 |
| Conducted Susceptibility | ISO 11452-4, ISO 7637-2, ISO 7637-3, MIL-STD-461G CS114, IEC 61000-4-6 |
| ESD | IEC 61000-4-2, EN 61000-4-2, ISO 10605 |
| EFT/Burst | IEC 61000-4-4, EN 61000-4-4 |
| Surge Immunity | IEC 61000-4-5, EN 61000-4-5 |
| Harmonics & Flicker | IEC 61000-3-2, EN 61000-3-2, IEC 61000-3-3, EN 61000-3-3, IEC 61000-3-11, IEC 61000-3-12 |
| Voltage Dips/Interrupts | IEC 61000-4-11, EN 61000-4-11, IEC 61000-4-29, IEC 61000-4-34 |
| Power Frequency Magnetic Field | IEC 61000-4-8, EN 61000-4-8, IEC 61000-4-9 |
| Bulk Current Injection (BCI) | ISO 11452-4, MIL-STD-461G CS114 |
| Pre-Compliance Testing | CISPR 25, CISPR 32, IEC 61000-4-3, AIS 004 (Part 3), IEC 60601-1-2 |
| Medical Device EMC | IEC 60601-1-2, EN 60601-1-2, IEC 61326-2-6 |
| Medical Device Regulatory | Regulation (EU) 2017/745 (MDR), IEC 60601-1, ISO 13485 |
| Automotive Component EMC | CISPR 25, ISO 11452-1, ISO 11452-2, ISO 11452-4, ISO 11452-5, ISO 7637-2, ISO 7637-3, ISO 10605, AIS 004 (Part 3), SAE J1113 |
| Automotive Vehicle-Level EMC | AIS 004 (Part 3), CISPR 12, ISO 11451-2, UN-ECE R10 |
| Automotive OEM Specifications | AIS 004 (Part 3), UN-ECE R10, CISPR 25, SAE J1113 |
| Military EMC | MIL-STD-461G |
| MIL-STD-461 | MIL-STD-461G |
| Railway EMC | EN 50121-3-2, EN 50121-4, EN 50155 |
| Radio Equipment Testing | ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI EN 301 489-17, ETSI EN 300 328, FCC Part 15.247 |
| Environmental Testing | IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-30, IEC 60068-2-78, IEC 60529 |
| Mechanical Testing | IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-64 |
Certifications / Marks
| Certification |
|---|
| CE |
| FCC |
| BIS |
| AIS / CMVR compliance |
| TUV Rheinland mark |
Industries Served
| Industry |
|---|
| Medical Devices |
| Automotive |
| Information Technology |
| Railway |
| Household Appliances |
| Industrial Equipment |
| Lighting Products |
| Consumer Electronics |
| Telecommunications |
| Energy & Power |
Major Equipment
| Equipment |
|---|
| 10 m anechoic chamber (Visakhapatnam) |
| 3 m anechoic chamber (Visakhapatnam) |
| Largest semi-anechoic chamber in the TUV Rheinland network |
| Accredited measurement capability to 40 GHz |
| Semi-anechoic chambers (Bengaluru and Pune) |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| BCI injection probes |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| Three-phase voltage dip and interruption simulator |
| Harmonics and flicker analyser |
| Click and discontinuous disturbance analyser |
| RF power amplifiers and immunity antennas |
| Combined shock and vibration chamber |
| Thermal shock chamber |
| Mobile on-site measurement equipment |
