
VentureOne - EMC Testing, Tawazun Industrial Park
Abu Dhabi, Abu Dhabi, United Arab Emirates
Tawazun Industrial Park, Al Ajban, Zayed Military City, Abu Dhabi, Abu Dhabi, 00000, United Arab Emirates
About
VentureOne runs an EMC testing facility at Tawazun Industrial Park in Al Ajban, within Zayed Military City east of Abu Dhabi, and both the location and the test list make clear what it is built for: this is a defence and aerospace electromagnetic environmental effects facility, not a consumer compliance house. Its subject-matter experts come from the Technology Innovation Institute, Abu Dhabi's applied research organisation, and the facility is organised around an EMC E3 Test System - E3 being electromagnetic environmental effects, the discipline that assesses whole platforms rather than individual products. More than twenty international EMC tests are offered across four groups, and the specific methods named map directly onto the MIL-STD-461 family: emission testing covering audio frequency currents and power leads, transient testing covering damped sinusoidal transients on cables and power leads, susceptibility testing covering bulk cable injection and impulse excitation, and antenna testing for material characterisation that calculates permittivity and permeability. Damped sinusoidal transient and impulse excitation testing in particular are military methods that commercial laboratories almost never hold. The facility list comprises a low-noise semi-anechoic chamber, a pulsed power laboratory, and dedicated areas for radiated emission, radiated immunity, conducted emission, conducted susceptibility and electrostatic discharge and lightning. Radar cross section measurement is offered alongside, which together with the permittivity and permeability work points to radar-absorbent and stealth materials characterisation as a core competence. EMC engineering support, design assistance and troubleshooting complete the offer, with prequalification testing, confidentiality protocols and competitive pricing emphasised. No accreditation is published - no ESMA, EIAC, ISO/IEC 17025 or TDRA recognition appears - so it is recorded here without an accreditation entry, and note that the site is inside a controlled military industrial zone requiring advance access arrangements. Specialisations are platform-level E3 assessment, pulsed power and lightning, radar cross section measurement, electromagnetic material characterisation, and military transient susceptibility.
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | MIL-STD-461G RE101, MIL-STD-461G RE102, MIL-STD-461G RE103, MIL-STD-464, RTCA DO-160G Section 21 |
| Conducted Emissions | MIL-STD-461G CE101, MIL-STD-461G CE102, MIL-STD-461G CE106, RTCA DO-160G Section 21 |
| Radiated Immunity | MIL-STD-461G RS103, MIL-STD-464, IEC 61000-4-3, RTCA DO-160G Section 20 |
| Conducted Immunity | MIL-STD-461G CS114, MIL-STD-461G CS101, IEC 61000-4-6 |
| Radiated Susceptibility | MIL-STD-461G RS101, MIL-STD-461G RS103, MIL-STD-461G RS105, MIL-STD-464 |
| Conducted Susceptibility | MIL-STD-461G CS101, MIL-STD-461G CS114, MIL-STD-461G CS115, MIL-STD-461G CS116, MIL-STD-461G CS117, MIL-STD-461G CS118 |
| ESD | MIL-STD-461G CS118, IEC 61000-4-2, RTCA DO-160G Section 25 |
| Surge Immunity | RTCA DO-160G Section 22, IEC 61000-4-5, MIL-STD-464 |
| Bulk Current Injection (BCI) | MIL-STD-461G CS114, ISO 11452-4, RTCA DO-160G Section 20 |
| Pre-Compliance Testing | MIL-STD-461G, MIL-STD-464, RTCA DO-160G, IEC 61000-4-3 |
| Military EMC | MIL-STD-461G, MIL-STD-461F, MIL-STD-464, AECTP-500 |
| MIL-STD-461 | MIL-STD-461F, MIL-STD-461G |
| Military Power Quality | MIL-STD-704F, MIL-STD-1275E, MIL-STD-461G CS101 |
| Commercial Aviation EMC | RTCA DO-160G Section 20, RTCA DO-160G Section 21, RTCA DO-160G Section 22 |
| Radio Equipment Testing | Radar cross section (RCS) measurement, Material permittivity and permeability characterisation, ASTM D5568, NRL 1D |
Certifications / Marks
| Certification |
|---|
| Prequalification test reports |
| Military and aerospace E3 test evidence |
| Radar cross section measurement reports |
Industries Served
| Industry |
|---|
| Aerospace & Defense |
| Military |
| Industrial Equipment |
| Radio & Wireless |
| Telecommunications |
| Energy & Power |
Major Equipment
| Equipment |
|---|
| EMC E3 (Electromagnetic Environment Effects) Test System |
| Low noise semi-anechoic chamber |
| Pulsed power laboratory |
| Dedicated radiated emission test area |
| Dedicated radiated immunity test area |
| Dedicated conducted emission test area |
| Dedicated conducted susceptibility test area |
| Electrostatic discharge and lightning test area |
| Damped sinusoidal transient generators (cables and power leads) |
| Bulk cable injection probes |
| Impulse excitation test equipment |
| Audio frequency current injection on power leads |
| Radar cross section (RCS) measurement range |
| Antenna material characterisation set-up (permittivity and permeability) |
| EMI receiver |
| Spectrum analyser |
| LISN |
| CDN |
| High-power RF amplifiers and immunity antennas |
| Located within a controlled military industrial zone (advance access required) |





