Vougavent Technologies
ConsultancyBengaluru, Karnataka, India
+91 80566 377761489, 5th Cross, 29th Main Road, MCHS Colony, BTM Layout 2nd Stage, Bengaluru, Karnataka, 560076, India
About
Vougavent Technologies is an EMI/EMC consulting practice in BTM Layout, Bengaluru, that runs its own in-house measurement facility for pre-compliance and diagnostic work rather than accredited certification. Its defining tool is near-field scanning: by mapping emissions directly above a board the practice localises a radiating structure to a specific track, component or connector, which is what allows it to claim resolution of more than a hundred EMC failures and the rapid turnaround it advertises. Measurement capability covers radiated emission, radiated susceptibility, electrostatic discharge, and surge and fast transient testing, applied against MIL-STD-461 for defence equipment, RTCA DO-160 for aeronautical hardware, CISPR 25 for automotive, CISPR 22 for industrial and medical products, FCC 47 CFR Part 15, EN 55011 and the IEC 61000 series. The service model is engineering rather than reporting: design review and consultation, root cause identification, countermeasure development, filter design and PCB planning, simulation-based performance prediction, failure investigation and compliance documentation support - so customers typically arrive with a product that has already failed elsewhere. No NABL or ISO/IEC 17025 accreditation is published, consistent with a pre-compliance and consulting facility, and it is recorded here without an accreditation entry. Industries served span defence, aeronautical, automotive, industrial, scientific, medical and general consumer electronics. Specialisations are near-field scanning and emission localisation, EMC failure root cause analysis, filter and PCB design for compliance, and simulation-led pre-compliance prediction.
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | CISPR 22, CISPR 25, EN 55011, FCC 47 CFR Part 15, MIL-STD-461G RE102, RTCA DO-160G Section 21, IEC 61000-6-3 |
| Conducted Emissions | CISPR 22, CISPR 25, EN 55011, FCC 47 CFR Part 15, MIL-STD-461G CE102, IEC 61000-6-3 |
| Radiated Immunity | IEC 61000-4-3, MIL-STD-461G RS103, RTCA DO-160G Section 20, ISO 11452-2 |
| Conducted Immunity | IEC 61000-4-6, MIL-STD-461G CS114, RTCA DO-160G Section 20 |
| Radiated Susceptibility | MIL-STD-461G RS101, MIL-STD-461G RS103, RTCA DO-160G Section 20 |
| Conducted Susceptibility | MIL-STD-461G CS101, MIL-STD-461G CS114, MIL-STD-461G CS116, ISO 7637-2 |
| ESD | IEC 61000-4-2, ISO 10605 |
| EFT/Burst | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5 |
| Pre-Compliance Testing | CISPR 25, CISPR 22, MIL-STD-461G, RTCA DO-160G, FCC 47 CFR Part 15, IEC 61000-4-3 |
| Military EMC | MIL-STD-461F, MIL-STD-461G |
| MIL-STD-461 | MIL-STD-461F, MIL-STD-461G |
| Commercial Aviation EMC | RTCA DO-160G Section 20, RTCA DO-160G Section 21, RTCA DO-160G Section 22 |
| Automotive Component EMC | CISPR 25, ISO 11452-2, ISO 7637-2, ISO 10605 |
| Medical Device EMC | IEC 60601-1-2 |
Certifications / Marks
| Certification |
|---|
| CE |
| FCC |
| Pre-compliance reports (non-accredited) |
Industries Served
| Industry |
|---|
| Aerospace & Defense |
| Military |
| Automotive |
| Medical Devices |
| Industrial Equipment |
| Consumer Electronics |
| Energy & Power |
Major Equipment
| Equipment |
|---|
| In-house EMC pre-compliance measurement facility |
| Near-field scanning system for emission localisation |
| EMI receiver |
| Spectrum analyser |
| LISN |
| ESD simulator |
| EFT/burst generator |
| Surge generator |
| RF immunity amplifier and antennas |
| Electromagnetic simulation tools for performance prediction |
| Filter design and PCB layout review bench |
