EMC Technologies
More labs in this area: EMC testing in Australia · EMC testing in New Zealand · EMC testing in Melbourne · EMC testing in Sydney
Keilor Park, Victoria, Australia
176 Harrick Road, Keilor Park, Victoria, 3042, Australia
Additional locations (2)
About
EMC Technologies is Australia's largest, most experienced and most accredited EMI/EMC/EMR/Safety testing group, established in 1992 by two EMC experts previously from the Department of Defence (Government Aircraft Facilities). With over 40 professional staff across four locations — Melbourne NW (HQ), Melbourne SE (EMC Bayswater subsidiary), Sydney, and Auckland NZ — they are the premier full-service EMC testing group in Australia and New Zealand. Key distinctions include ownership of the only commercial accredited 10 m iOATS in Australia and NZ (for large product radiated emissions), an outdoor OATS in Sydney for vehicles too large for the chamber, NATA accreditation for MIL-STD-461 and DO-160, and being the only VCCI-registered test house in Australia/NZ. EMC Technologies also holds Competent Body status under the Australian Radiocommunications Act and CAB (Notified Body) status for the EU EMC Directive 2014/30/EC.
Accreditations
| Accreditation |
|---|
| ISO/IEC 17025 |
| A2LA |
Testing Services
| Test Type | Applicable Standards |
|---|---|
| Radiated Emissions | AS/NZS CISPR 11/12/13/14-1/15/22/32; EN 55011/32; FCC Part 15B/18; ICES-003; VCCI; 10 m iOATS (only commercial one in AU/NZ); MIL-STD-461 RE01/RE101/RE02/RE102; DO-160 Section 21 |
| Conducted Emissions | AS/NZS CISPR 11/14-1/22/32; EN 55032; FCC Part 15B; ICES-003; MIL-STD-461 CE01/CE101/CE03/CE102 |
| Radiated Immunity | IEC/EN 61000-4-3; CE immunity suite; EN 55014-2/55024/55035; MIL-STD-461 RS01/RS101/RS02/RS03/RS103; DO-160 Section 20 |
| Conducted Immunity | IEC/EN 61000-4-6; MIL-STD-461 CS01/CS101/CS02/CS06/CS114/CS115/CS116; DO-160 Section 18/19 |
| Radiated Susceptibility | MIL-STD-461 RS101/RS103; DO-160 Section 20/22 |
| Conducted Susceptibility | MIL-STD-461 CS101/CS114/CS115/CS116; DO-160 Section 17/18/19 |
| ESD | IEC/EN 61000-4-2; MIL-STD-461 CS118; DO-160 Section 25; ISO 10605 (automotive) |
| EFT/Burst | IEC/EN 61000-4-4 |
| Surge Immunity | IEC/EN 61000-4-5 |
| Harmonics & Flicker | IEC/EN 61000-3-2/3-3 |
| Voltage Dips/Interrupts | IEC/EN 61000-4-11 |
| Power Frequency Magnetic Field | IEC/EN 61000-4-8 |
| Automotive Component EMC | CISPR 25; ISO 11452; ISO 7637; ISO 10605; ECE R10; OEM specs (Ford, Holden, Toyota etc.) explicitly listed |
| Military EMC | MIL-STD-461B/C/D/E/F/G; MIL-STD-462; NATA accredited; 3 accredited facilities |
| MIL-STD-461 | Full CE/RE/CS/RS suite; NATA accredited at Melbourne and Sydney |
| Commercial Aviation EMC | RTCA/DO-160 up to edition G; Sections 15/17/18/19/20/21/25; NATA accredited |
| Medical Device EMC | IEC/EN 60601-1-2; TGA and FDA compliance; Medical Devices Directive 93/42/EC |
| Radio Equipment Testing | RCM/ACMA; FCC Part 15C/D/E; ISED; VCCI (only AU/NZ registered lab); MIC Japan; CE/RED; ETSI EN 301 489 series; AS/NZS 4268/4771 |
| Wireless Coexistence | BT/BLE/WiFi/ZigBee/LTE; FCC and ISED recognised; ETSI |
| SAR Testing | RF exposure/EMR — ARPANSA RPS3; AS/NZS 2772; ACMA Human Exposure Framework |
| Railway EMC | EN 50121 series; Railway & Rolling Stock explicitly listed |
| Pre-Compliance Testing | — |
| Environmental Testing | — |
| Mechanical Testing | — |
| Product Safety | — |
Certifications / Marks
| Certification |
|---|
| NATA ISO/IEC 17025 |
| NATA ISO/IEC 17020 |
| RCM / ACMA |
| CE Mark |
| UKCA Mark |
| FCC |
| ISED Canada |
| VCCI (Japan) |
| MIC (Japan) |
Industries Served
| Industry |
|---|
| Aerospace & Defense |
| Automotive |
| Consumer Electronics |
| Energy & Power |
| Household Appliances |
| Industrial Equipment |
| Information Technology |
| Lighting Products |
| Medical Devices |
| Military |
| Multimedia |
| Radio & Wireless |
| Railway |
| Telecommunications |
